Zenelli Qp1 Quick Release Plate For Cameras

Product Code: eq43908
Availability: In Stock

$267.00 $336.42

Qty

7 reviews Write a review

Description
Reviews (7)

Made of anodized aluminum, this Zenelli QP1 Quick Release Plate for Camerasfrom Zenelli QP1 Quick Release Plate for Camerasis durable yet compact, measuring 5.5" in length and weighing only 3.3 oz. It offers a pair of 1/4"-20 screws in line with one another for attaching up to two pieces of gear such as cameras, flashes, or microphones. These screws can be repositioned in their own grooves to provide a better fit for your equipment, featuring a maximum distance of 4.25" and a minimum distance of 1.5" between holes.

The plate supports the Arca-type quick release system and can be used with compatible clamps, or directly mounted via its 3/8"-16 threaded hole at the bottom. Included with the product is a 2mm hex key for installation, as well as a small carrying bag to protect the equipment from dust.

Arca-Type Compatible Length: 5.5" Twin 1/4"-20 Screws for Attaching Gear 3/8"-16 Thread Below Plate Anodized Aluminum Construction Weight: 3.3 oz 2mm Hex Key and Carrying Bag Included

Parameters
Mounting	2x 1/4"-20 Male 1x 3/8"-16 Female
Strap Loop	No
Quick Release Plate Type	Arca-Type
Quick Disconnect System	No
Bubble Level	No
Materials	Aluminum
Dimensions	5.5" / 14 cm
Weight	3.28 oz / 93 g
Packaging Info
Package Weight	0.4 lb
Box Dimensions (LxWxH)	7.2 x 4.8 x 2"

5.5"-long plate with dual 1/4"-20 screws that run along grooves, offering two repositionable connection points

Maximum distance between grooves is 4.25", minimum gap is 1.5"

Compatible with the Arca-type system, with a 3/8"-16 threaded slot also available for mounting

Anodized aluminum construction keeps plate lightweight at only 3.3 oz

2mm hex key and anti-dust carrying bag included

Related Questions and Answers

Q: 1. Is this plate suitable for canon 70-200 2.8 is iii ? Or p10 ?

A: Yes, the P20 will work fine with the 70-200mm.

Q: 2. does this work for the ronin S?

A: Yes, this plate is compatible with the DJI Ronin-S.

Q: 3. Is it compatible with RRS clamps ?

A: yes

Q: 4. IS THE P-30 COMPATIBLE WITH CANON 400 MM F4 LENS?

A: Their website recommends a P-20 lens plate for the Canon 400 f/4 DO lens. They did tell me that you could use a slightly longer plate if you wish.

Q: 5. Does this fit the MVH502AH fluid head? Doesnt seem like it can accept anything bigger than a normal size 504PLONG plate.

A: This should fit , as it is essentially the same plate with the metric side markings.

Q: 6. Can the battery door be opened with this plate on (x-t30)? Thank you.

A: Yes the screw mount is offset to allow for the battery door to open.

Q: 7. Will this fit the A7R2 and the A6400 ?

A: The Gitzo Quick Release Plate for Sony Alpha Cameras is designed for use with Sony's slightly larger a7-series and a9 Mirrorless Digital Camera. It may fit the a6400, but do note the a6400 has a smaller body size and the tripod socket is not in the same place as on the larger cameras, so tne Anti-Twist flange may not align properly, but it should fit on the camera. It will work on the Sony Alpha a7R II Mirrorless Digital Camera.

Q: 8. What is the front-to-back dimension of the top surface, not including the lip? I'm trying to determine if this is compatible w/ the X-Pro3.

A: Unfortunately, I do not see the dimensions you list above listed on Acratech's website. However, they do state that the Acratech Quick Release Plate for Nikon FTZ Adapter, B&H # ACQRPZ6Z7FTZ • MFR # 2212, is designed for use with both the Fujifilm X-Pro3 Mirrorless Digital Camera and the Nikon FTZ lens mount adapter. If you are looking for a dedicated Arca-type quick release plate for the X-Pro3, B&H # ACQRPZ6Z7FTZ is recommended for your usage needs.

Q: 9. How long does the screw extend above the plate? I have a similar product from competitor but the screw is too short (about 4.2mm) to hold well on my Sigma 70-200.

A: Wimberley has created a reference guide for which plate is recommended for each lens, which can be found here: https://www.bhphotovideo.com/lit_files/356150.pdf According to the guide, the P10 is the recommended plate for the Sigma 70-200mm lens. Here is a link to the P10 plate: https://www.bhphotovideo.com/c/product/205333-REG/Wimberley_P_10_P10_Quick_Release_Plate.html?sts=pi&pim=Y

Q: 10. Is this compatible the E-Image GH03 QR plates?

A: The plate that comes with the E-Image Quick-Release Adapter will fit the E-Image GH03 head. so you can easily go between them.

Daniel	08/09/2024
[Aluminum] Fits camera properly.Best plate I could find for this camera 5

Andrew	09/08/2024
[0.4 lb] I didn't think I'd ever find a plate for my D5500 that won't twist. This works great and doesn't get in the way of the articulating LCD at all. It was good to find this for a camera that isn't going to get the attention of the big Arca-Swiss plate makers. I'm hoping this is also generic enough to fit other small cameras since the lip on the back is just enough to keep it from twisting. 5

Joel	15/06/2024
[Arca-Type] It's a well made plate and fits the D7500 very well. No complaints! 5

Barbara A	15/05/2024
[7.2 x 4.8 x 2"] Although this was not an original for my camera - it did the trick. B and H was very helpful!! 5

David H.	08/05/2024
[7.2 x 4.8 x 2"] I needed an Arca-Swiss compatible plate for my F6, so I chatted with B&H. They actually had an employee try out several possibilities, and then recommended this one. As promised, it fits perfectly. 5

Nancy	04/05/2024
[7.2 x 4.8 x 2"] This plate is so helpful for the Sony cameras. It has a small lip on it to prevent the camera from drifting when in the vertical position on the tripod. This is a must for Sony cameras. Bought two ( one for each camera 5

Ryan	09/04/2024
[Aluminum] One of the major design flaws (in my opinion) of the X-T20 is the placement of the tripod plate mount being so incredibly close to the battery door. This makes access to your battery compartment (which also houses the memory card, btw) very difficult with practically any other tripod plate mounted to it (first world problems, #amiright ?) This plate solves all of my problems, with the added bonus of shifting the mount directly under the lens (for those OCD peoples out there). Well designed, and solidly built, the "lips" on either side of the "camera facing" portion of the mount cradle the camera perfectly, eliminating "off center" attachment (shoutout #2 for the OCDer's). In all seriousness, great mount for any X-T20 users who frequently use tripods (and prefer a tripod mount constantly fixed to the camera). 5