Hprc Wheeled Hard Case For Dji Inspire 2 With Foam

Product Code: eq43969
Availability: In Stock

$1,739.97 $2,609.95

Qty

7 reviews Write a review

Description
Reviews (7)

HPRC Wheeled Hard Case for DJI Inspire 2 with Foamis a customized version of the company's 2780W case, made specifically for the Inspire 2 with Zenmuse gimbal/camera and accessories. The case is watertight as well as impact resistant to provide maximal protection for your investment.

Hold Inspire 2 with Gimbal Attached Hold Transmitter (Radio Controller) Hold Four Spare Flight Batteries Hold iPad mini / Tablet up to 7.9" Hold LCD Monitor Hold Filters / SSDs Hold Charger, Charging Hub, and Cables Hold up to Three Lenses Impact Resistant and Watertight Pressure-Release Valve

Parameters
Interior Dimensions	29.5 x 20.7 x 14.4" / 749 x 525 x 366 mm
Operating Temperature	-40 to 176°F / -40 to 80°C
Exterior Dimensions	31.9 x 23.1 x 15.3" / 810 x 586.5 x 388 mm
Weight	31.52 lb / 14.30 kg (with foam)
Packaging Info
Package Weight	34.5 lb
Box Dimensions (LxWxH)	32.6 x 24 x 16.2"

DJI Inspire 2 with Gimbal Attached

Transmitter (radio controller)

Four spare flight batteries

iPad mini or other tablet up to 7.9"

LCD monitor

Two SSDs

Two filters

Two sets of propellers

Charger and cables

Gimbal

Gimbal cover

Three lenses

Charging Hub

Cavities for miscellaneous accessories

Related Questions and Answers

Q: 1. Can it fit a crystal sky?

A: The CasePro Landing Mode Wheeled Hard-Shell Case for DJI Inspire 2 will not have a designated compartment for the Crystal Sky Monitors. The following compartments are available in the case: 1x Inspire 2 drone 2 x Inspire 2 transmitters 2 x iPads (Up to 9") Zenmuse X4S or X5S Gimbal Camera (on or off the drone) 12 x Inspire 2 batteries 5 x Cine SSD cards SSD card reader 3 x Charging Hubs Extra propellers Battery charger and cables Inspire 2 camera box DJI Follow Focus CasePro tool case Other accessories via 4 additional compartments

Q: 2. If this is a landing mode case, does it hold the X7 still attached? With lens? Or without?

A: Yes the X7 with lens attached will fit.

Q: 3. Does this fit the Cendence remote?

A: I do not have the condense remote but the slots available just fit the remote supplied with the Inspire 2. My usurpation is that the condense remote is larger and would not fit.

Q: 4. i need interior foam for this case

A: Unfortunately, we do not carry the interior foam for this case separately. In order to have foam for this case, you will need to purchase the HPRC 6300 with foam included: http://bhpho.to/1jnJ1D1

Q: 5. Does it fit the I2 with X7 attached ?

A: I leave my camera attached. I have the 4 though. I am sure it would as long as the lens was not attached.

Q: 6. Will this case work with the Inspire 1 v 2.0 ?

A: No it will not.

Q: 7. Is this cabin friendly size? How many camera and lenses will fit in?

A: This is just slightly larger than the average allowable carry-on dimensions from most airlines. This case's external dimensions listed in the Specifications are: 22.0 x 13.8 x 9.2 in (55.9 x 35.0 x 23.3 cm), while the average airline carrier's approved carry-on bag dimensions are: 22.0 x 14.0 x 9.0 in (56.0 x 35.0 x 22.0 cm), including handles and wheels. It would be up to the airline to allow it on-board or require it to be checked at the gate.

Q: 8. Is this a landing mode case and does it fit the X7 camera and gimbal installed with a lens?

A: Guess it should work. We are using the X5S and use the case according to your question.

Q: 9. Can anyone who's purchased this case review it please?

A: While the HPRC Hard-Shell Wheeled Case for DJI Inspire 3 has no reviews, every other case by HPRC that has reviews, the reviews are 4-5 star. No reason to think this one any less quality.

Q: 10. Will this accommodate a Cendance remote or Crystal Sky? How many Batteries?

A: This case will hold up to 6 batteries, and should accommodate the crystal sky monitor. I do not believe this case will accommodate the Cedence transmitter.

Daniel	19/09/2024
[34.5 lb] I have 2 of HPRC cases and they are built like tanks! When you invest thousands of dollars in the imaging equipment, its no brainer to invest in cases to transport and store the equipment in them. I have tried the drone case company but the quality and toughness weren't there. If you're looking for case to store your sensitive equipment, look no further! 5

John	07/07/2024
[34.5 lb] This case is awesome. It has room for everything you would need to take with you on an outing. Drone in landing mode, 2 remotes, 2 screens, 2 hub chargers, numerous batteries, props, cords, camera, and lenses. Its easy to tote around, and it has an extending handle so you can wheel it while standing straight up. It's well padded, and water tight. You name it, this thing has it. 5

Tim	02/06/2024
[34.5 lb] I am using this case to protect a DJI Inspire 2. It has room to expand with extra batteries and could hold an extra charger and a couple of iPads. It also allows you to put the i2 in the case in landing mode with the camera attached. Simply take the blades off and put in the box. It is great for a quick set up and stowing. 5

Tech	22/05/2024
[34.5 lb] Exactly what i ordered 5

doug	19/05/2024
[34.5 lb] Little things like how the handle extends make this case superior to Pelican's 5

Mike	05/05/2024
[34.5 lb] Bought this to replace a Pelican case to store my Takahashi EM-200 mount in. The Pelican case was really too large, while this one is nearly a perfect fit. Would highly recommend. 5

Ryan	02/04/2024
[34.5 lb] The case is awesome. The cutouts are very precise and the case itself is very sturdy. The ability to take the whole setup with you in one case is great and the footprint is not that much bigger than the DJI M30T case. I’m very pleased with the product. 5