Prevent leaks and keep your Nikon D5 camera safe in Aquatica's AD5 Underwater Housing with the SURVEYOR Moisture and Vacuum Sensor. This unit is sensitive to atmospheric pressure, and it allows you to confirm watertight integrity before diving. An included compensation function improves accuracy by ensuring that changes in ambient or internal temperature will not cause incorrect readings.

Once your camera is installed, simply push the actuation button on the sensor's circuit board. With the optional valve and extracting pump, which are part of the complete Vacuum Circuitry Kit, you can actually remove excess air to create a vacuum in the housing.

For Nikon D5 Camera    Confirm Watertight Integrity before Dive    Sensitive to Atmospheric Pressure    Audible Alarm and LED Indicators    Temperature Compensation for Accuracy    Use with Optional Vacuum Valve and Pump

• LED light will turn green for 2 seconds to confirm actuation
• Once a complete vacuum is achieved, the LED will blink in green again for 2 seconds
• During your dive, the LED will flash in green every 5 seconds, indicating system integrity
• If the pressure level is increasing but a vacuum has not yet been achieved, the LED will begin to flash in orange
• Should a slight loss in pressure be detected, the LED will start to flash in orange to warn you
• If your housing system is failing to maintain a vacuum, or the slightest amount of water has made contact with the sensor probes, an audible alarm will go off and the LED will also flash rapidly in red
• Advanced Aquatica circuit has temperature compensation included, so changes in ambient or internal temperature will not cause incorrect readings
• Onboard actuation button is for the vacuum only; your alarm is always on
• With the optional valve and extracting pump, which are part of the Vacuum Circuitry Kit, you can remove excess air to create a vacuum in your housing
• Housing can be purchased with this system pre-installed at the factory before shipment, in which case this one will serve as a spare or replacement
• If you purchased the housing without this kit initially, you can now add it on
• This SURVEYOR system may be used to replace the discontinued #20023 moisture alarm found in older housings

Related Questions and Answers

Q: 1. How this as a camera mounted mic on a Sony Fx9 for run and gun doc work.

A: Remove the included pistol grip shock mount and use the camera's microphone holder.

Q: 2. Dimensions?

A: The press without the table outside dimensions is 77 x 57 x 7 . And working area is 44 x 68 x 1 .

Q: 3. What is the width of this arm?

A: The diameter of the Aquatica 11" Delta 3 Double Ball Buoyancy Arm is 2.970 inches.

Q: 4. what is the maximum temperature of this device? safe range please...

A: The temperature range is from 170-215F.

Q: 5. What type of filter bags for this model?

A: The DV-5PBRP is the replacement filter bags.

Q: 6. What is the arm made off ??Carbon fiber ??Aluminum ??

A: The arm is made of aluminum.

Q: 7. hi, May I know what is the distance from the opening in the camera to the opening of the housing? Is the vacuum check system same as the Aquatica surveyor kit? Lastly, the housing will be tested before shipping right?

A: Aquatica pressure test all housings before shipping. The included vacuum check system with the Aquatica Underwater Housing for Sony Alpha a7R III or a7 III with Vacuum Check System is the SURVEYOR pressure valve and vacuum pump. To check housing specs that are not listed under the spec tab email us at uw@bhphoto.com.

Q: 8. How loud is this model?

A: There are no hard specifications regarding decibel level. As expected, it emits a fairly loud high-pitched whine while operating.

Q: 9. What type of filter bag does this model need?

A: The replacement bag is DV-5PBRP which are the filter bags.

Q: 10. Is this vacuum bagless?

A: The METROVAC Vac N Blo Classic Vacuum & Blower BH #MEVNB94BD is bagless.