The Lindell Audio Vintage Pultec Equalizer Single-Channel Transformerfrom Lindell Audio Vintage Pultec Equalizer Single-Channel Transformerfits in all 500-series compatible racks. Like the classic EQs it was modeled after, the PEX-500VIN features all discrete circuitry, including transformer-coupled balanced inputs and outputs. A series of 3-step switches provide hassle-free control over your low- and high-frequency EQ bands plus the cut-off frequency for high-frequency attenuation.

• Compatible with all standard API 500-Series compliant racks
• Transformer coupled balanced inputs and balanced outputs provide pristine clarity
• 3-step switched low-frequency boost 30, 60, 100 Hz ±10%
• 3-step switched high-frequency boost 6, 10, 16 kHz ±10%
• 3-step switched high-frequency attenuation 10, 15, 20 kHz ±10%
• True bypass hardware preserves your sound quality when bypassed

Related Questions and Answers

Q: 1. 110 and 220 Volts or just 110? +4dBu or -10dBV?

A: The Golden Age Project EQ-73 3-Band Equalizer comes with a separate 24V AC power adapter. The power adapter that is included with the EQ-73 that B&H sells is intended for use in North America and is designed for 110V. The nominal operating level is -18 dBu. The EQ-73 cannot be used as a standalone EQ. It is made to be used together with the Golden Age Project PRE-73 Preamp which has has an insert jack. The control range for the EQ-73 is +/-15 dB for the low and mid frequency bands, and +/-18 dB for the high frequency band. The nominal operating level is -18 dBu.

Q: 2. Does the Bellari EQ570 come with a power supply?

A: Yes, the Bellari EQ570 4-Band Audio Equalizer ships with a PS27s 15V Power Supply.

Q: 3. Hey! I have a Sennheiser MD 46 dynamic microphone. Do you know if the preamps in the linkflex-ad2 are good enough to boost this dynamic microphone? I would like to use the linkflex to connect the MD 46 to an iPhone (and possibly my good old Zoom H2). Would that work?

A: As previosly answered: 6249490Approved The Linkflex specs show up tp 20dB of gain. which may be enough gain, depending on your subjects volume level. One question is, how much electronic noise will be added to the signal? Another question is, how will the MD46 sound if you must turn the Linflex up to full level on its level control. A big part of how a microphone will sound, is the impedance of the mic pre (the Linkflex) amplifier. The noise spec is not listed in the spec sheet, so I would be weary of this. It may be a lot to include, but this is the reason these; Cloudlifter CL-1, are included in the signal chain with dynamic mics, to improve, not only gain, but performance... Comica Specs: Comica Audio LINKFLEX-AD2 Specs General In-Line Accessory Type Pre-Amplifier Gain Up to +20 dB Connectivity I/O 1 x 1/8" / 3.5 mm TRRS Male Output 1 x 1/8" / 3.5 mm TRS Female Headphone Output 1 x Combo XLR-1/4" TS Female Mic/Hi-Z Input Performance Frequency Response 20 Hz to 20 kHz ±1 dB THD+N 0.02% (2-Kilohm Load)

Q: 4. Can I use this to convert output from a BLX to USB?

A: Yes, you can send the XLR or 1/4" output from the BLX receiver to the input on the MOTIV MVi, just as you would connect a wired mic or instrument.

Q: 5. Can this work integrated amp & turntable?

A: If your turntable has a built-in phono pre-amp, then yes, you could connect this EQ between the turntable and line inputs on the amp. If not, you would need an additional phono preamp to connect to the turntable, before connecting to the EQ. Here's a suggestion BH #BEVP549.

Q: 6. what is this used for?

A: To remove ground loops, hum and other unpleasant and unwanted noise you might find in your signal path. Should this occur by going from one device into another, you would insert this box in line and by selecting one of 3 switch positions the noise will hopefully disappear. Each box has 2 inputs and 2 outputs, XLR and .

Q: 7. is it possible to completely attenuate the output signal by turning the level controls completely counter-clockwise?

A: The rotary controls on the ART EQ341 are input level controls to adjust the signal level of the audio going into the EQ341. These controls are not output volume level controls.

Q: 8. can you attenuate the output signal completely by turning the level controls completely counter-clockwise?

A: The input control is listed as input level, not a mute. It may still pass low level signal, even all the way down.

Q: 9. If your amplifier is CE certified can I get testimony from you to that effect?

A: You can find Ashly's certifications by following the link below, and clicking on the 'features' tab. https://ashly.com/tra-convection-cooled/

Q: 10. Where is this product made?

A: Made in China