The Onyx 120 Bi-Color LED Camera Lightfrom Onyx 120 Bi-Color LED Camera Lighthas an output of roughly 100W at full power, yet draws only 15W. It is a bi-color light that enables you to adjust the color temperature of the fixture's output from 3200 to 5600K and features a CRI of 95 and TLCI of 96 in both Tungsten and Daylight. Power on/off, dimming, and color temperature are controlled from the back of the fixture via four buttons. A two-digit LED screen is shared for dimming and color temp, with an indicator light informing you of which characteristic you are controlling.

The fixture powers from an L-series battery, and ships with the equivalent of a 550 L-series battery. You can also power the fixture from an optional AC power supply that outputs 13 to 17 VDC. The built-in diffusion helps prevent the effect of multiple cast shadows that afflict some LED array-type lights. A built-in 1/4"-20 threaded mounting hole, and the included cold shoe adapter enable mounting the fixture on your camera.

100W Equivalent    3200 to 5600K Variable Color Temperature    Dimmable Output: 99 to 10%    110° Beam Angle    15W Power Draw    Accepts L-Series Batteries    Push-Button Control    1/4"-20 Threaded Mounting Hole    Accessory Shoe Adapter Included    Battery and Battery Charger Included

On the back of the fixture are four buttons:

Related Questions and Answers

Q: 1. I used two lights. Nice flood spread and color WB preset. I used the two small batt at full power I got 20 minutes then I changed batteries to two 970 at fulll power Approximately one hour and 10 minutes is there a better battery solution

A: Heat is an issue for these onyx lights. I love them but I have had mine shut off after just over an hour. I now turn them off between shooting and have a much better battery time. A 970 battery can last me half a day when turned on and off and given a bit of time to cool down...

Q: 2. Does the unit accepts AA batteries?

A: No, it only accepts a rechargeable battery that comes with the unit (SONY NP-F550/570).

Q: 3. Hola, soy de Chile.El cargador de batera es compatible con el voltaje de 220 Volt? Gracias.

A: The battery this light uses will work with a charger that is Multi-Voltage. You will be able to use this light internationally.

Q: 4. What's the lux measurement on this light at one meter?

A: Lux at 1m: 3200K: 460 lux 4400K: 620 lux 5600K: 520 lux

Q: 5. does it have a battery power meter? How it works. My Light overheated and battery die in the middle of a wedding

A: I’ve been disappointed with the battery life of this light.

Q: 6. Is this light suitable for use as studio lighting for digital portrait photography?

A: I suppose it could be used in a low budget setup, but the output is not very bright and the surface area of the source is pretty small, so the light is not that diffuse. It is easy to work with and versatile in both color and output controls, so if you're working with multiple light sources in a totally controlled environment (where you can control ambient light) and you're good with cranking up your ISO, this would be an OK option.

Q: 7. What's the size of the external power jack?

A: The size of the power jack is not listed. However Ikan offers both D-Tap and AC Power cables for this light if needed. AC Adapter for Light - https://bhpho.to/2YjI8mG D-Tap Cable for Light - https://bhpho.to/2pE3Y5M

Q: 8. I must sometimes, work in the rain. Does this light hold up to getting wet?

A: Unfortunately, the ikan Onyx 120 Bi-color LED is not waterproof.

Q: 9. Does not specify if battery and charger are included. Are they?

A: Yes they are. This includes a NP-F550 style battery and charger with it.

Q: 10. Is there a barn door accessory for this unit?

A: No barn door