Designed to be used in professional video applications BLUESHAPE GRANITE TWO High Rate Discharge 266Wh Batterybatteries add new Wi-Fi connectivity to the feature list of the original GRANITE battery series. They also come in Gold mount in addition to V-mount options. On the outside, these batteries are designed for the rigors of a film or video set. The textured finish is easy to grab and is resistant to blemishes from drops and impacts. Both the interior and exterior have been tested to survive multiple vertical drops from up to 6 feet onto hard surfaces and the IP65 rating ensures that these SPLASH designated batteries will remain operational in inclement weather and dust conditions. The reinforced Gold mount is compatible with most Gold mount chargers.

Aside from being robust, the GRANITE batteries are also powerful. Power-hungry cameras and lights can draw up to 12 amps, between the main battery output and the two D-taps on the sides. In addition to outputting 14.4 volts of power, either D-tap can serve to charge the battery with a separately available D-tap charger. As an extra measure of protection, the D-taps have rubber covers that help maintain the IP65 resistance rating against moisture and dust ingress.

While the 5-LED battery meter is useful and convenient, BLUESHAPE offers a free iOS/Android app that can monitor and control various aspects of the battery, completely wirelessly, over Wi-Fi. The app updates in real-time based on current capacity, charging speed, and power draw. On set, all batteries can be monitored on the same network, so not only do you can know when to grab a fresh battery ahead of time, but which battery is ready to go without having to play a guessing game.

14.4V 266Wh Li-Ion Gold Mount Battery    Supports up to 12A Continuous Draw    Wi-Fi Smartphone App Control    IP65 Rating    5-LED Power Gauge    2 x D-Tap Accessory Outputs    Supports Charging via D-Tap

GRANITE TWO batteries are the first generation to introduce BLUESHAPE's GRANITE LINK, a Wi-Fi communication feature allowing for remote, real-time status monitoring via a free iOS/Android mobile app. Using GRANITE LINK you can check data such as State of Charge, Expected Time to Empty, Cell Temperature, Remaining Capacity, Full Charge Capacity, and Cycle Count. The state of charge and remaining runtime are updated in real time based on the actual load conditions.

An operator, camera assistant, or technical director can easily monitor the state of batteries in close proximity without having to physically press the button to check on the actual battery. Multiple batteries can be monitored simultaneously from a single device. Additional features through the app allow you to Identify, Lock, Unlock, and Connect to a different network. A Rental Mode is available to limit the period of use when the battery is leased.

Batteries can create their own Wi-Fi network for single battery monitoring, or can be connected to a master Wi-Fi network. A fleet of batteries can be easily monitored by multiple devices without complicated pairing procedures. Batteries can be given custom names for easy identification.

Related Questions and Answers

Q: 1. hellois this baterys compatible with the RED charger?thank you

A: Hello Gaston, I confirm this battery is 100% compatible with RED Charger and RED cameras.Hope this helps.Regards, Pietro

Q: 2. Can the gold mount version of these batteries be charged on an Anton Bauer charger?

A: The Gold Mount Version of this battery, B&H # BLSBG140HDM2, should charge fine on an Anton Bauer Gold Mount Charger.

Q: 3. Can you charge these on a RED Brick charger?

A: I haven’t charged mine on a RED charger, but it’s likely to work. I use an IDX charger, not a Blueshape, and they’re fine. I routinely use whatever v-mount battery on whatever charger with no problems for years. The only real potential problem I see is if a warranty situation comes up. The battery company will blame the charger company for the fault and vice versa. When you get to know the chargers and batteries, after time, you’ll easily be able to diagnose if you have a battery problem or a charger problem. These batteries are the best I’ve ever had. Ditch those RED bricks. They’re only 90wh (if I remember correctly), but with a profile of a bug 120-140wh battery. It’s the worst of both worlds (weak currant, but the size of a big battery. Blueshape mini’s are the opposite. Low profile, low center of gravity, but the 140wh ones can deliver 12A continuously, which is unheard of for its size.

Q: 4. Can these be charged on a Core SWX GP-2LSJ Charger?

A: Yes

Q: 5. Does this battery work with an GoPro Omni? I am currently running a Switronix Hypercore-98S Battery . Could it run off this as well?

A: Yes you can !

Q: 6. Will this fully charge on Anton Bauer Performance chargers?

A: According to Blueshape, they believe in all likelihood the charger will work has intended. However, we will have to add that compatibility is not guaranteed and nor does it have warranty support.

Q: 7. Will it power and communicate with the Ursa Mini G2 (new model); Is this CARRY-ON approved?

A: Yes, this system will work with the Ursa Mini Pro G2. At 90 Watt Hours it is under the normal 100 Watt Hour limit for carry-on batteries. However you will want to consult with your airline before traveling.

Q: 8. Can this battery be recharged with a D-Tap battery charger?

A: Hello Dominic, I confirm they can be charged from DTap.Pietro

Q: 9. Can I charge this battery on an IDX charge station like the VL-4S Endura 4-channel ?

A: Sure can. No problems there.

Q: 10. How many aprox minutes do you get shooting with a Red Gemini?

A: See my specific answers in the reviews. I am both Daniel and MistaToad. One of those comments was from the older v-mount version. I got 1hr45min with several peripherals. Can't remember if it was v-mount or gold mount, I have 6 of each. (Other note: I said something of certain v-mounts not fitting. They made a slight redesign that fits those weird Sonys---I have since had another sony plate not fit them...but only 2 out of my 6 v-mounts.)