This Benro TSL08AN00 Slim Aluminum Tripod Ball Headfrom Benro TSL08AN00 Slim Aluminum Tripod Ball Headsupports up to 8.8 lb and includes an Arca-type ball head with quick release plate. Designed to conserve space during storage and transport, the tripod measures 20.1" long and 3.2" wide when folded. Its 4-section legs each feature an independent spread, a 3-position angle lock, half-turn twist locks for rapid deployment, and a rubber foot to enhance stability on a wide variety of surfaces. Together, the three legs can be extended and spread to raise the tripod from a minimum height of 15.7" to a maximum height of 48.4" or 57.6" with its push-and-pull, rapid center column fully raised.

Cameras, lenses, or sport optics that are compatible with a 1/4"-20 mount can be connected to the included quick release plate. The quick release plate can be attached or removed from the integrated, Arca-type clamp located at the top of the head's ball-and-socket joint by tightening or loosening the clamp's knurled, locking knob. While the top of the quick release plate features a rubberized, non-slip platform, dual retaining screws are provided along its underside. Those retaining screws help prevent the quick release plate and an attached camera from accidentally sliding off when the clamp it is placed on is opened.

By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Additionally, the primary locking knob controls the ability to pan the head 360°. For added versatility, the tripod's center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them.

A nylon, drawstring bag is provided for storage and transport.

Slim-Profile Tripod    Folded Width: 3.2", Folded Length: 20.1"    Load Capacity: 8.8 lb    Max Height: 57.6", Min Height: 15.7"    Leg Sections: 4, Weight: 2.6 lb    Reversible, Rapid Column    Aluminum-Alloy Legs, Rubber Feet    1/2-Turn Twist Locks, Bubble Level    Magnesium-Alloy Ball Head, 90° Tilt    360° Pan, Arca-Type Compatible Clamp

• Supports up to 8.8 lb
• Push-and-pull center column with ballast hook for rapid camera, lens, or sport optic positioning
• Can be set for a minimum height of 15.7" to a maximum height of 48.4", or 57.6" with center column fully raised
• Center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them
• Legs each feature 4 sections, a 3-position angle lock, half-turn twist locks for rapid deployment, and can be independently spread
• Legs can be locked at 21°, 55°, or 80° angles
• Rubber feet help to enhance stability on a wide variety of surfaces
• Built-in bubble level
• Weighs 2.6 lb, measures 20.1" long and 3.2" wide when folded
• Hex key to adjust tension on leg hinges

• Aluminum-alloy legs
• Magnesium-alloy ball head with Arca-type quick release clamp
• Aluminum-alloy quick release plate with 1/4"-20 mount; rubberized, anti-slip surface; and dual retaining screws that prevent the base plate from accidentally sliding off when the clamp it is placed on is opened
• Drawstring bag for storage and transport

Related Questions and Answers

Q: 1. Is the folded length of 20.1" including the ballhead or does the ball head add more height?

A: The folded length factors in the ball head.

Q: 2. Can you shoot down for flat lay photography or do you need an arm?

A: The tripod does not have a column that goes horizontal. The center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them. If the object is large you will need to use a tripod arm. This is a link for some of them, https://bhpho.to/3nabqRy

Q: 3. Is the a light weight gimbal head that I can use with this tripod? I use a micro four thirds set up.

A: The Benro TSL08CN00 Slim Carbon-Fiber Tripod with Ball Head only supports 8.8 pounds so it would not be recommended for use with a gimbal head.

Q: 4. How does this compare to a fluid head?

A: A friend of mine asked if this is a fluid head tripod and I honestly didn't know what to say, not knowing for sure whether it is or not. He and I both agreed that it is pretty darn smooth for an inexpensive tripod.

Q: 5. Will this work with a Cannon rebel t6?

A: Yes it will. This tripod will work very well with the Canon Rebel T6.

Q: 6. Is there a short center column available for this tripod? Thanks!

A: There is a center column that you can bring up and lock into place - its probably about 8-12 inches if my memory serves correctly - were very happy with this product - it was recommended to us by a friend who is a professional photographer

Q: 7. Its mentioned for mirror less cameras? Can i use it for my canon 700d

A: Absolutely, I use it with my Nikon d750 and a 3.5lb Lens with no stability issues

Q: 8. I have a Peak Design Capture plate on my camera. Is this tripod compatible with that plate?

A: Yes! :) Both Peak Design and this tripod use the arca-swiss system.

Q: 9. Can you remove the center column?

A: The column on the Benro TSL08CN00 Slim Carbon-Fiber Tripod with Ball Head can be removed and turned upside down for low angle shooting if you remove the column completely there is no place for the tripod head to attach.

Q: 10. I'm looking to change ball heads, any idea what size I need?

A: Depends on what your setup. It uses a standard 3/8 thread for the head mount so it can accept any standard tripod head. Just know that the legs can only handle so much weight and a bigger head means more bulk. The one it comes with is pretty capable. It has worked with my 70-200/2.8 on a 5D2 when I needed it in a pinch.