A company already known for creating benchmark products, Broncolor Scoro 3200 S Wi-Fi RFS 2 Power Packraises the bar to even loftier heights with the introduction of the Scoro S 3200 Wi-Fi RFS 2 Power Pack. Due to revised hardware and software, Bron users can now control the functions of the pack with mobile devices such as smartphones, tablets, and computers.

The Scoro S boasts advanced features photographers have come to expect from this industry leader. Bron provides independent control of the 3 flash outlets' power in 1/10 or 1 stop increments over a range of 11 stops. Settings can be viewed on the highly visible illuminated LCD display. ECTC technology (Enhanced Color Temperature Control), aimed at preventing color shift over the entire output range, is onboard. You can also use it to select your own color temperature in 200K increments.

Bron has introduced Speed Mode into the Scoro S which reduces the recycle time and flash duration by up to 50%, while the maximum output is reduced by 25%. This allows you to trigger up to 10 flashes per second at full power and up to 50 exposures at reduced settings. Fan cooling prevents overheating the pack.

Recycling is stunningly fast - 0.02 to 2 seconds in Normal Mode and a lightning fast 0.02 to 1.2 seconds in Speed Mode at 120 VAC. Known for very fast flash durations, the Scoro S doesn't disappoint. The shortest flash durations are 1/10,000 at t0.1 and 1/14,000 at t0.5 in both Normal and Speed Modes. The Broncolor

Scoro S 3200 Wi-Fi RFS 2 has a 100 to 240 VAC power supply for worldwide use.

3200Ws    Enhanced Color Temperature Control: ECTC    3 Individually Controlled Head Outlets    11-Stop Range: 1/10 or 1 Stop Increments    100-240 VAC    Normal and Speed Modes    0.02-1.2 Sec Recycling (120V Speed Mode)    Flash Duration 1/10,000 @ Min. t0.1    Wi-Fi and Radio Triggering Options    Illuminated Silicone Keypad

Flash duration and light output are the two decisive factors in light control.

A microprocessor in Scoro and Move power packs will calculate for you the shortest or longest flash duration for a given output. This enables rapid flash sequences with up to 50 flashes per second.

Scoro S, Scoro E, and Move are the only studio flash systems that can maintain color temperature over the entire power range at all outputs or when needed, can be changed to calibrated steps of +/- 200K at constant power. The second generation of the patented ECTC (Enhanced Color Temperature Control) technology, which adapts flash voltage and flash duration to each other, achieves a constant color temperature over the entire variation range.

When multiple lamp heads are connected, constant color temperature is guaranteed on all channels up to an asymmetry of two f-stops.

The Scoro S has three lamp outlets. Each lamp outlet has an individual power controller with LED display, which is adjustable independently of the other outlets. The unit therefore behaves like three independent power packs. You have a choice of up to 11 f-stops to set the flash output you need.

In Speed Mode, the charging time and flash duration are reduced by up to 50% while the power is reduced by 25%. In this way, you can achieve up to ten shots per second at full output, or up to 50 at reduced power. This makes the Scoro S 3200 Wi-Fi RFS 2 a top-class flash unit for fashion shoots, and with its fan cooling, even long flash series are no problem.

All Scoro S 3200 Wi-Fi RFS 2 functions can be radio-controlled using an optional transmitter or thanks to revised hard and software can be conveniently controlled by the bronControl app. Using a Wi-Fi connection, mobile devices (smartphones and tablets) as well as desktop computers are able to communicate with this high-end power pack.

Adjusts automatically to the line voltage.

Related Questions and Answers

Q: 1. Should I get RFS 2.1 or 2.2 for X1D?

A: Either RFS2.1 or 2.2 NIkon is suitable and fully compatible with the X1D with the major difference being size, battery (coin-cell on 2.1, AA on 2.2) and control interface, the choice is yours.

Q: 2. Will this work with the Broncolor Verso A2?

A: This transmitter is not directly compatible with the Verso A2. The correct transmitter for Verso A2 is B&H # BRTRFS MFR # B-36.130.00.However, the Verso A2 can be updated to be compatible with the RFS2 series at an Authorized broncolor Service Center.

Q: 3. Does this transceiver work with the Panasonic S1H?

A: The RFS2.1 is compatible with all standard flash shoes for sync at the camera's rated flash sync speed (X-Sync), but not HS flash sync.

Q: 4. Does the Broncolor RFS 2.1 transceiver work with the H6D-50C hasselblad camera along with siros 800 S?

A: Yes, the RFS2.1 can be used on the H6D-50c via the camera's hot-shoe, or PC sync port. It will sync with the Siros 800S' integrated RFS2 receiver for flash and remote power controls.

Q: 5. the 3200 (S & E) are WIFI/RFS 2 so they do not need Receivers?

A: That is correct. The Broncolor Scoro 3200 S Wi-Fi RFS 2 Power Pack has a built-in receiver that works with the Broncolor RFS 2.2 N Transceiver. The Radio Frequency is 2.4 GHz.

Q: 6. Can 1600J Broncolor flash heads be used with this power pack?

A: Yes, you may use the Broncolor Pulso G 1600J flash head with the Broncolor Scoro E 3200 RFS 2 Power Pack (100-240V).

Q: 7. Does this unit have 1 pin contact??? Does its also have PC sync attachment?

A: There is a single pin on the shoe and it accepts a miniphone to PC male cable on the side.

Q: 8. Does this unit work with broncolor move ? Or should i purchase another receiver to pair with this transmitter in order to trigger my mover wirelessly ?

A: the move can be triggered by the RFS 2.2. To use the RFS 2.1 you need one unit on each end

Q: 9. does the transmitter turn off?

A: According to page 7 of the PDF MANUAL it enters an energy saving mode at eight hours which may elicit a slight delay if a flash event occurs during this mode Flash triggering is synchronized either via the central contact of the hot shoeor the sync jack of the camera. Outdoors, the remote control range is up to50 m; indoors, it is up to 30 m. The transceiver is powered by a lithium buttoncell (Li-Mn CR2450). To minimise energy consumption, the transceiver is setto an energy-saving mode after eight hours have elapsed. If a flash triggeringaction occurs through the camera whilst the RFS 2 or RFS 2.1 transceiver isin energy-saving mode, a slight delay of the synchronization with the camerashutter release can take place. The RFS 2 or RFS 2.1 transceiver quits theenergy-saving mode after this flash release.attention: although this radio system allows the selection of up to 99 studioaddresses, the number of actually available channels depends on theconnected rFs 2 or rFs 2.1 flash unit. Battery life is listed as 8 - 12 months or 100,000 flasheshttp://www.bron.ch/uploads/tx_bronproducts/RFS2.1_30_09_2013_Englisch_01.pdf

Q: 10. the 3200 (S & E) WiFi/RFs 2 do not need Receivers, Jut a Transmitter on the camera?

A: Yes just a Broncolor RFS 2 compatible transmitter is needed.