This brown, compact MM-PSM Pro Omnidirectional Earset Mic for Audio-Technica Wirelessdelivers clear spoken-word and vocal reproduction for presenters and performers working in music, theatrical, broadcast, house of worship, lecture, and presentation settings. It comes with a Hirose 4-pin connector that plugs into select Audio-Technica bodypack transmitters.

The MM-PSM Pro Series earset features a 3mm capsule mounted on a short 3.4' boom that can be discreetly positioned away from the mouth for an unobtrusive fit. The earset can be worn on either the left or right ear and feels natural when used for extended periods of time. The extremely flexible boom is virtually unbreakable.

The capsule delivers full-frequency (20 Hz to 20 kHz) audio performance and high gain before feedback for detailed speech intelligibility. The 145 dB of dynamic range makes this mic well suited for loud vocal performances in houses of worship and on the musical stage. The mic's omnidirectional polar pattern offers enhanced plosive protection with no proximity effect for a natural sound.

All MM-PSM Pro Series microphones are made in the USA.

For Stage, Broadcast, Public Speaking    Omnidirectional Pickup Pattern    3.4" Boom/Low-Profile/Single-Ear Design    Hirose 4-pin Connector    Made in the USA

• Hirose 4-pin connector for compatibility with the following Audio-Technica wireless transmitters: ATW-T35, ATW-T75, ESW-T211, ATW-T601, ATW-T701, AEW-T1000, AEW-1000A, ATW-T1001, 600 Series, 700 Series, 1000 Series, 1200 Series, 4000 Series, 5000 Series, 7000 Series, System 10, and System 10 Pro

Related Questions and Answers

Q: 1. What adapters do I need to use this with a zoom H4N?

A: The AT803B features a power supply/battery pack that requires an XLR mic cable to attach to an external device such as a digital recorder. Cables are available from 1 to 100 feet depending on your application. Please see the following link: http://bhpho.to/1JLOy07

Q: 2. will the AT803b lavalier mics take NiMH Rechargeable batteries?

A: The AT 803 lavalier mic will accept rechargeable AA batteries.

Q: 3. Will this work properly on portable recorders like the Zoom H1?

A: The Audio-Technica AT803B will work with the Zoom H1 provided you are using it with the correct adapter cable; KOLMT100. If you would like a more streamlined solution, please consider the Countryman EMW Omnidirectional Lavalier Microphone for Digital Recorders; B&H# COMEMWSFF05B.

Q: 4. As I understand, the mic gets the power from the Tascam phantom +48V OR from the supplied power module. Please clarify. Can I plug the mic directly into Tascam XLR or I need an additional adapter? Thanks in advance.

A: The phantom power comes from the included power adapter. You can plug the XLR otput into any device that accepts a mic level signal without needing additional power.

Q: 5. Will this work with a Nikon D800 and/or Tascam DR-07? It is my understanding that I will need a Kopul LMT100 but wondering how much audio quality will be affected...

A: It was a good quality

Q: 6. Hi guys! Can i plug this mic directly to my mixer with a miniXLR to XLR adapter and feed it with phantom power? In cases i cant use the power supplier that comes in the package.

A: The Audio Technica AT 803 requires the power supply unit to be connected whether using battery or phantom power.

Q: 7. Will this work with a Canon 600d (Australia) - does it require a third party audio mixer for optimal sound recording?

A: To connect directly to the external mic input of your camera an XLR cable and an impedance matching adapter will be required: The Kopul LMT100 cable simply enables a microphone or mic-level device to be input into a high-impedance 3.5mm mini input found on DSLRs, camcorders, and other devices. It is 1.5' long and has a 3-pin XLR female connector on one end and a standard 3.5mm mini plug on the other. It is designed for use with mono microphones. B&H# KOLMT100.For the best sound (lowest noise floor) a DSLR adapter interface is the way to go:The BeachTek DXA-SLR PRO HDSLR Audio Adapter is designed to enhance audio quality with virtually any HDSLR camera by providing high quality XLR inputs, AGC disabling, built-in limiting, headphone monitoring, comprehensive metering and more. Connect up to two microphones and provide 12 or 48V phantom power to professional condenser microphones. B&H # BEDXASLRPRO.

Q: 8. What is the diameter of the microphone cable?

A: The AT803 features a 6 foot long, 2.6mm diameter cable.

Q: 9. I want to connect this to a computer. Is there an adapter I can get to plug it into a 3.5mm?

A: Use the Comprehensive EXF Series Mini Male TS to 3-Pin XLR Female Cable - 6' B&H # COCMMXF6

Q: 10. Will this mic work work with a TASCAM DR-40? And do I need any other accessories like xlr cable to use it?

A: This mic will connect directly to a TASCAM DR-40 via a standard XLR cable: The Kopul Studio Elite 4000 Series XLR M to XLR F Microphone Cable (6') is a studio-quality cable for connecting mics to mixers, preamps, audio interfaces and recorders; or to be used in any other application where XLR connectivity is required. The cable is engineered to be both quiet and durable, and is well-suited for critical recording and broadcast situations. B&H# KOM4006. http://bhpho.to/1qfqgR7