This black, compact Pro Series Omnidirectional Earset Mic for Electro-Voice Transmittersdelivers clear spoken-word and vocal reproduction for presenters and performers working in music, theatrical, broadcast, house of worship, lecture, and presentation settings. It comes with a TA4F connector that plugs into select Electro-Voice bodypack transmitters.

The MM-PSM Pro Series earset features a 3mm capsule mounted on a short 3.4' boom that can be discreetly positioned away from the mouth for an unobtrusive fit. The earset can be worn on either the left or right ear and feels natural when used for extended periods of time. The extremely flexible boom is virtually unbreakable.

The capsule delivers full-frequency (20 Hz to 20 kHz) audio performance and high gain before feedback for detailed speech intelligibility. The 145 dB of dynamic range makes this mic well suited for loud vocal performances in houses of worship and on the musical stage. The mic's omnidirectional polar pattern offers enhanced plosive protection with no proximity effect for a natural sound.

All MM-PSM Pro Series microphones are made in the USA.

For Stage, Broadcast, Public Speaking    Omnidirectional Pickup Pattern    3.4" Boom/Low-Profile/Single-Ear Design    TA4F Connector    Made in the USA

• TA4F connector for compatibility with the following Electro-Voice wireless transmitters: 2000 Series and 2500 Series

Related Questions and Answers

Q: 1. Unsure about which cable to purchase as microphone will be plugged into Azden FMX-DSLR mixer. Do I need the Kopul or the Hosa?

A: The Electro-Voice RE50 will connect to the XLR mic inputs on the Azden FMX-DSLR. The Kopul 4000 series cable is an XLR mic cable that will allow you to connect the two together. a href= http://bhpho.to/1wXUMX2 target= _blank http://bhpho.to/1wXUMX2/a

Q: 2. I need a windscreen for the small slender shotgun microphone on top of camera: A Sony ECM-NV1 or equivalent?

A: Hi - This item works for me but I'm afraid I couldn't give any advise one way or the other in yourparticular situation - maybe look up on the web and read the reviews?God bless -George Bailey

Q: 3. how does this microphone work - need a user guide?

A: The Electro-Voice 635A is a wired dynamic mic. most commonly used for interviews. There unfortunately is no instruction manual, but all documentation available is downloadable from the Electro-Voice website.

Q: 4. I already have a Tascam DR-10L Pro. Is there an adaptor that will allow me to use this (or another ENG mic) without a new rec?

A: An adapter cable such as BH #RECASEK100M could technically be used to connect a dynamic ENG mic to the Tascam DR-10L, but this would not be recommended. Dynamic microphones will need more gain than the DR-10L is designed to provide, and results may not be as desired.

Q: 5. Would this work with the Senal UEM-155 with TA4F?

A: Electro-Voice has stated that the TXA - TA4-Male to XLR-Male Adapter will not function with other brands of microphones.

Q: 6. Hi I have these Electro-voice Evid 42 speakers system but the grills are rusting..Can you tell me the cost to replace the grills since I have re-painted them twice already? thank you Sarita

A: Please contact Electro-voice directly for availability and priocing for these OEM replacement grilles.Electro-Voice (Distributed By - Telex Communications)Tel: 800-392-3497 or 866-782-8346Website: a href= http://www.electrovoice.com/ target= _blank http://www.electrovoice.com//a

Q: 7. Will this work with Shure PGA98H?

A: Yes, the Electro-Voice TXA - TA4-Male to XLR-Male Adapter is compatible for use with the Shure PGA98H-TQG Clip-On Cardioid Condenser Horn Mic with TA4F (B&H # SHPGA98HTQG). The TXA adapter will convert the TA4F plug to standard 3-pin XLR and allows you to use phantom power from mic input on the mixer, amplifier, or recorder to power the PGA98H microphone.

Q: 8. I have an Electro-Voice Evolve 50, what EV microphone works with the Evolve 50?

A: You can use any dynamic microphone with the Electro-Voice Evolve 50, including the RE50 B.

Q: 9. Is there a rack mount kit for two of these half units?

A: There is no rackmount kit available for 2 units of the Electro-Voice RE3-ND76 Wireless Handheld Microphone System with ND76 Wireless Mic (5L: 488 to 524 MHz); however, the 2 receivers can be attached to any 1U rack shelf.

Q: 10. Is this ideal for a podcast? Or is there a better handheld option?

A: This microphone is great to be used for interviews, however in a podcast scenario you might want to look into dynamic recording microphones. see links bellow for options. For the Podmic in the first link you will need a interface to connect it to a computer, the second mic can be used both with a interface or via usb straight into the computer. https://www.bhphotovideo.com/c/product/1449997-REG/rode_podmic_dynamic_podcasting_microphone.html?sts=pi&pim=Y https://www.bhphotovideo.com/c/product/1593379-REG/shure_mv7_k_mv7_mic.html?sts=pi&pim=Y