Amplify your music at FOH performances with the single, black Turbosound 12" 2-Way Passive Loudspeaker Blackfrom Turbosound. Designed to work in conjunction with LAKE DSP and LAB Gruppen, this loudspeaker is suitable for touring, portable, and installed sound reinforcement applications. It delivers 2400W peak power making it ideal for offstage fill, stereo in-fill, or distributed fill applications at a wide range of venues including nightclubs, concert halls, houses of worship, and more.

Finished in a highly durable semi-matte black paint, the cabinet is constructed from 3/4" plywood with a rugged powder-coated, perforated steel mesh grille backed with reticulated foam, a dual-angle 35mm pole/speaker stand mount for accurate audience coverage, and durable handles for easy transport. The TBV123 includes integral suspension hardware for efficient array configuration and aiming, plus multiple internal M10 mount points that allow eyebolt suspension in any orientation.

For Sound Reinforcement Applications    2400W Peak Power Handling    For LAKE DSP & Lab Gruppen Amplification    Dual 1" Motor Compression Drivers    12" Low-Frequency Driver    Multiple M10 Suspension Points    3/4" Plywood Cabinet    Durable Handles for Easy Carrying

Constant curvature dendritic waveguide with 100° H x 15° V dispersion for seamless array coverage

Ideal for FOH, side, and drum fill applications

Carbon fiber 12" neodymium low-frequency driver with inside/outside wound voice coils

Switchable passive/bi-amp operation for flexibility of use

Dual-angle pole mount for accurate audience coverage

Related Questions and Answers

Q: 1. This speaker has Bluetooth system

A: No, the Turbosound NuQ152-AN does not have Bluetooth built-in. but you can use a separate Bluetooth receiver adapter which would allow you to stream audio from another device like a smartphone, tablet or computer to the speaker.

Q: 2. How many M10 mounting is available on this speaker?

A: Mounting and Rigging:The cabinet is fitted with M10 x 8 internally-threaded rigging points that allow it to be rigged with optional shoulder eyebolts and mountedin many different configurations in permanent installations. The simplest method of rigging is to use the two M10 rigging points on the top.Cabinets may also be hung upside down if required.The cabinet has an integral 35 mm pole mount socket in the bottom panel, that allows it to be pole mounted.The optional NuQ122-FY fly yoke adds further installation flexibility for scaffold, surface, and pole mounting.

Q: 3. I am looking to have these speakers controlled by a lecture amp ?

A: The JBL SCS 12 Two-Way Spatially Cued Cinema Ceiling Passive Surround Loudspeaker BH #JBSCS12 should have a minimum of 100 watts input at 8 ohms. Check your lectern's amplifier output rating.

Q: 4. What is the RMS?

A: The RMS rating for the Electro-Voice ZLX-12P-G2 12" 2-Way 1000W Powered Loudspeaker with Bluetooth (Black), B&H # ELZLX12PG2US, has not been published by the manufacturer. The internal 1000W Class-D power amplifier drives the 12" woofer and the 1.4" high-frequency titanium compression driver, which together make up a frequency range of 48 Hz to 18 kHz (-10 dB) and a maximum SPL of 126 dB (maximum SPL is measured at 1 m using broadband pink noise at maximum output).

Q: 5. this loud speaker 3 way 4732 MADE BY USA / CHINA / KOREA ?

A: According to the information in our system provided by JBL, at this time the 4732-T is manufactured in Mexico.

Q: 6. Hi, where can I find the hardware to hang them from a truss?

A: https://www.bhphotovideo.com/c/product/1337144-REG/global_truss_dt_f34_spk_mt_truss_speaker_mount_capacity.html

Q: 7. Where are the mounting points? Will this unit work with the JBL mounting eyehook kit?

A: The JBL AM5212/95 Loudspeaker System has 15 mounting points - 4 on the top, 4 on the bottom, 2 on each side, and 3 on the back - which use M10 eyebolts with washers such as the JBL 229-00009-01 Eyebolt Kit for Select JBL Loudspeakers - Set of 3 (B&H # JBHKSPVS).

Q: 8. Is this just a subwoofer or can it be used as a speaker?

A: The Yamaha CBR15 is not a subwoofer. It is a 2-way passive speaker with a 15" woofer that provides the lowest frequency extension in Yamaha's Bass Reflex series of speakers. The Bass Reflex series also includes the CBR12 which has a 12" woofer and the CBR10 which has a 10" woofer. The CBR15 is suitable for use in a wide variety of applications for live sound and DJ systems, and it can also be used as a floor monitor.

Q: 9. what would be a recommended amp to run four of these speakers?

A: The JBL SCS 12 Two-Way Spatially Cued Cinema Ceiling Passive Surround Loudspeaker BH #JBSCS12 will work well with the: Crown Audio DSi 2.0 Series LA4 1200W 4-Channel Amplifier for JBL Cinema Loudspeakers B&H # CRLA4 Key Features: For Professional Cinema Rooms JBL Cinema Speaker Tuning Presets 2200W at 4 Ohms per Channel DriveCore Technology for Reliability Intuitive LCD Screen for Set Up Onboard 96 kHz/32-Bit DSP Crossovers, EQ, Delay, Filters, Limiting RJ45 for HARMAN Audio Architect Software SNMP for Theater Management Systems

Q: 10. How long for warranty?

A: 3 years part and labor in the USA.