The Juice Goose JG 9 Power Distribution 19" Rack Systemfrom Juice Goose JG 9 Power Distribution 19" Rack Systemis intended for use in 19-inch rackmount environments. It features 9 NEMA 5-15R outlets: 8 on the back, 1 on the front. The front outlet is unswitched. The back outlets are rotated 90 degrees to better accommodate wall wart power supplies. The outlets draw power via the unit's 6-foot NEMA 5-15P power cord. To protect your installation from electrical damage, the JG 9 features a back-mounted circuit breaker, line conditioning, and spike protection.

9 AC Outlets    15A Rating    6' NEMA 5-15P Power Cord    Back-Mounted Circuit Breaker    AC Line Conditioning & Spike Protection

The JG 9 provides 9 AC receptacles, including one unswitched outlet on the front of the unit. The eight receptacles on the back are rotated to better accommodate wall wart power supplies. Each of the AC outlets is NEMA 5-15R-rated for 15 amps.

The JG 9 has a 15A circuit breaker and a 12A maximum current rating.

The unit features AC power protection that includes a fast-acting metal oxide varistor, which guards against high-energy surges between the line and neutral power leads. This protection also includes filtration capacitance, which enhances the surge protection and adds a primary level of line-noise elimination.

The power cord is rated for 15A and features a NEMA 5-15P plug. It's 6' long.

The JG 9 features a circuit breaker mounted on the back of the chassis and is rated for 15A.

Related Questions and Answers

Q: 1. When I plug in more than two EW receivers, they don't boot up. Is there a higher output power supply we need to use for this?

A: The Sennheiser EW-D Power Distribution Cable (BH # SEWDPDC) shall only be used with the NT 12-35 CS power supply.

Q: 2. what are the dimensions?

A: The dimensions of the Adam Hall AH-87404 19" Rack Drawer - 4 U Steel are as follows: Outside height - 4 U Outside width - 434 mm Outside depth - 392 mm Inside height - 175 mm Inside width - 401 mm Internal depth - 373 mm

Q: 3. Can you use the NP-9X 96Wh Lithium-Ion Battery with this?

A: Yes, the Remote Audio BDSv4U Battery Distribution System can use the IDX System Technology NP-9X 96Wh Li-Ion NP-Style Battery as a power source if the Remote Audio 24" BDS Input Cable with NP-1 Battery Cup to TA4F (BH #REBDSNPADW) is implemented to adapt the battery to the distribution system.

Q: 4. I need the 12 foot width. But I also have to squeeze into an 8 foot maximum room. What is the minimum witdh when set in place?

A: The crossbar is broken down into 4 sections, which measure 38.2" each.

Q: 5. Could these wheels be used to replace the cast wheels on a 127VS Manfrotto dolly or do they have proprietary connectors?

A: I have the manfrotto114 mv with the wheels that came with it and it does not look easy to do. The orbit dolly that they go on is awesome purchase that and you will love it.

Q: 6. Are the screws included with TP-Link Rackmount Kit-19?

A: Yes, mounting screws are included with the TP-Link 19" Switch 2-Piece Rack Mount Kit.

Q: 7. Why can't I make it work? Main mic into input, cables and/or wireless cubes into outputs, right?

A: Hi, yes you have it right - the main microphone gets plugged into the input and you connect the outputs to your destinations with cables or wireless. For help troubleshooting, please call our Pro Audio specialists at 800.606.6969. Thank you for shopping at B&H!

Q: 8. Is there a cable that would connect this to a camera dummy battery?

A: We are not aware of dummy battery cables for this product.

Q: 9. Hello, and thank you in advance for your responses. What is the maximum width of the stand when fully assembled and setup for use? Richard Martinez, Houston, Texas.

A: The kit comes with 4 cross bars. Connected together the maximum width is 12 feet wide.

Q: 10. This breakout box is rated for "5A Max Global (60W)". Should I get a more powerful unit if I want to power the SD888, with SL-2 superslots and 8M power station (for the A20 Minis)?

A: As the Remote Audio BDSv4U Battery Distribution System is designed for bag use with components drawing less power, it would be recommended to implement multiple redundant power distros with a second battery or perhaps a larger power distro designed for cart use such as BH #REMEONLIFE Remote Audio Meon LiFe Cart Power System: https://bhpho.to/3ITnzEE