The black Single Earset Mic for Lectrosonics Systems - Blackfrom Single Earset Mic for Lectrosonics Systems - Blackis an ultralow-profile, single-earloop microphone with high gain before feedback designed to deliver detail and clarity even in noisy spaces or near loudspeakers. The flexible earloop comfortably conforms to your ear and the boom can be precisely placed to deliver accurate sound. This mic is intended for voice reinforcement in theater plays, speeches, lectures, male and female vocals, and more.

TA5F Connector    For Lectrosonics Wireless Systems    Miniature Low-Profile Single-Ear Design    Flexible Earloop    Sturdy Boom    Hypercardioid Polar Pattern    50 Hz to 15 kHz Frequency Response    High Gain Before Feedback    For Speech & Vocals    Windscreen & Holding Clip Included

TA5F connector for compatibility with the following Lectrosonics wireless systems: M185, M187, and UM700

Related Questions and Answers

Q: 1. Does it require 48V phantom power?

A: No, the Polsen ESM-1-MN Single-Sided Earset Microphone does not require 48V of phantom power, it requires 1.5 to 5V of plug-in power which can be supplied through the 3.5mm mic input on many recorders or cameras, as well as by the 3.5mm jack on certain computers.

Q: 2. Dumb question, would this work if I plugged this into an average aux port?

A: Whether you are referencing an Aux In port or an Aux Out port it will not work because mic signal is much lowerl than line level signal like from a headphone output for example. Because of that, the ESM-1-MN would only be compatible with a microphone input.

Q: 3. I'm wondering if I bend it to be used on the other ear if the microphone will break? It's currently set up for the left ear.

A: The boom on the Polsen ESM-1-35H Single-Sided Earset Microphone is flexible and adjustable, so it should not break if you bend it to curve for use on the right ear.

Q: 4. Could this be used with a Rode VXLR+ 3.5mm TRS female to XLR male adapter with phantom power converter to use it as a wired mic?

A: Yes, the Polsen ESM-1-35H Single-Sided Earset Microphone for Sennheiser Transmitters (B&H # POESM135H) can be used with the RODE VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (B&H # ROVXLRP) in order to connect it to a wired XLR microphone input. As another option, you could use the similar Polsen ESM-1-MN Single-Sided Earset Microphone for Recorders and Wireless Transmitters (B&H # POESM1MN) for connection to a standard 3.5mm TRS mic input with plug-in power. Either version of the earset mic can be used with the VXLR+ adapter for connection to an XLR mic input. The difference between the two models is that the version for Sennheiser transmitters has a locking 3.5mm connector and the version for recorders has a standard non-locking 3.5mm connector.

Q: 5. Can one purchase extra cables with the 3.5/sennheiser connection?

A: While not currently available at B&H, spare headset cables for the Galaxy Audio ESM8 Single-Ear Headset Mic with 4 Cables can be found at the manufacturer's website, linked here: https://bit.ly/36C5BbJ

Q: 6. how thick is this weight?

A: It is 4 inches in diameter and 1.75 inches in thickness.

Q: 7. what type of Mic's you suggest?

A: Hello, depending on what type of recording you are trying to accomplish, we recommend any one of our Blue microphones. Our Blue lineup offers a variety of different mic sizes and capsule amount for different environments.

Q: 8. Does this have a ptt button? If so, where is it?

A: The Motorola IXTN4011 Single-Ear Headset with Boom Mic does not have a Push-To-Talk button.

Q: 9. Is this a one time fee? Would there be any annual renewal or maintenance charges required in addition to the price? Is this the fee for a school district or individual?

A: It is a one time cost with no additional fees. If you are buying for a school, please contact the B&H EDU department for pricing.

Q: 10. Will this work with multimode fiber?

A: Unfortunately these are only compatible with single mode fiber.