The brown Single Earset Mic for Azden Systems - Microphone Madness (Brown)from Single Earset Mic for Azden Systems - Microphone Madness (Brown)is an ultralow-profile, single-earloop microphone with high gain before feedback designed to deliver detail and clarity even in noisy spaces or near loudspeakers. The flexible earloop comfortably conforms to your ear and the boom can be precisely placed to deliver accurate sound. This mic is intended for voice reinforcement in theater plays, speeches, lectures, male and female vocals, and more.

Locking 3.5mm Male Connector    For Azden Wireless Systems    Miniature Low-Profile Single-Ear Design    Flexible Earloop    Sturdy Boom    Hypercardioid Polar Pattern    50 Hz to 15 kHz Frequency Response    High Gain Before Feedback    For Speech & Vocals    Windscreen & Holding Clip Included

Locking 3.5mm male connector for compatibility with the following Azden wireless systems: Older 41BT and 10BT

Related Questions and Answers

Q: 1. Will this work with the Zoom h1?

A: I have used this product with the zoom H6 only, and it works well.I am not sure about the zoom h1. If there is a connection on the device, it should work just fine.

Q: 2. Are the clips removable?

A: yes.

Q: 3. Could this be used with a Rode VXLR+ 3.5mm TRS female to XLR male adapter with phantom power converter to use it as a wired mic?

A: Yes, the Polsen ESM-1-35H Single-Sided Earset Microphone for Sennheiser Transmitters (B&H # POESM135H) can be used with the RODE VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (B&H # ROVXLRP) in order to connect it to a wired XLR microphone input. As another option, you could use the similar Polsen ESM-1-MN Single-Sided Earset Microphone for Recorders and Wireless Transmitters (B&H # POESM1MN) for connection to a standard 3.5mm TRS mic input with plug-in power. Either version of the earset mic can be used with the VXLR+ adapter for connection to an XLR mic input. The difference between the two models is that the version for Sennheiser transmitters has a locking 3.5mm connector and the version for recorders has a standard non-locking 3.5mm connector.

Q: 4. Will this work with the Rode Go wireless system?

A: Yes it will.

Q: 5. How long is the cord?

A: The EX503L features a 1.3 meter cable (4.26 feet).

Q: 6. Do these mics produce two mono signals, meaning the left mic is the left channel and the other mic is on the right channel? Or are they mixed into stereo, both mics on the right and left channel? Thanks!

A: Each microphone is sent to a separate channel (left and right).

Q: 7. Will this ear piece work with the Shure BLX1 J10 wireless transmitter?

A: Yes, The Polson ESM-A-TA4 will work with the Sony BLX transmitters,

Q: 8. Dumb question, would this work if I plugged this into an average aux port?

A: Whether you are referencing an Aux In port or an Aux Out port it will not work because mic signal is much lowerl than line level signal like from a headphone output for example. Because of that, the ESM-1-MN would only be compatible with a microphone input.

Q: 9. is this microphone compatible with the "Azden WLX-PRO+i VHF wireless microphone system for cameras & mobile devices"?

A: Yes, the HS-9 microphone is fully compatible with the WLX-PRO+i wireless system.

Q: 10. Does it require 48V phantom power?

A: No, the Polsen ESM-1-MN Single-Sided Earset Microphone does not require 48V of phantom power, it requires 1.5 to 5V of plug-in power which can be supplied through the 3.5mm mic input on many recorders or cameras, as well as by the 3.5mm jack on certain computers.