Nanuk 908 Hard Case With Foam Insert Olive 8.8L

Nanuk 908 Hard Case With Foam Insert Olive 8.8l

Product Code: eq45532
Availability: In Stock

$260.85 $315.63

Qty

11 reviews Write a review

Description
Reviews (11)

This olive Nanuk 908 Hard Case with Foam Insert Olive 8.8Lfrom Nanuk has an 8.8L capacity and a foam insert to protect your delicate items during storage and transport. The case accommodates photo/video gear, batteries, lenses, flash drives, hard drives, microphone systems, pistols, fishing gear, binoculars, scopes, medical devices, instruments, industrial tools, or other equipment. Made from dust, crush, and waterproof NK-7 polypropylene resin, it has a cubed foam insert so you can customize the interior for your specific needs. There is a convoluted egg crate foam layer for the lid and a solid base layer for the bottom.

Its molded-in bezel and gasket are held fast with two PowerClaw latches that use compressive force to keep the case closed to a dust and waterproof IP67 rating. An integrated slide lock prevents the case from opening during transport or if dropped. For additional security, the case accepts user-supplied padlocks. It has a built-in pressure release valve that regulates the internal pressure, allowing you to open the case without having to break a tough pressurized seal that may develop during air travel. Further design features include an integrated lid stay that prevents the lid from closing on your hand, rustproof and strong stainless steel hardware, and a foldable soft-grip top handle. This case can be stacked with other Nanuk 908 cases for convenient storage.

Dust, Crush, and Waterproof Customizable Cubed Foam Insert Lightweight NK-7 Polypropylene Resin 2 PowerClaw Latches Automatic Pressure-Release Valve Molded-In Bezel System and Padlock Holes Integrated Lid Stay for Safe Access Comfortable Soft-Grip Handle Stackable with Same-Sized Cases

Key Specs
Color	Olive Green
Carry/Transport Options	Handle
Type of Closure	Latch
Interior Type	Cubed Foam
Water Resistance	Waterproof IP67
Dimensions	Exterior 12.5 x 9.8 x 8" / 31.8 x 24.9 x 20.3 cm Interior 9.5 x 7.5 x 7.5" / 24.1 x 19.1 x 19.1 cm 1.4" / 3.6 cm (Lid Depth) 6.1" / 15.5 cm (Base Depth)
Weight	3.6 lb / 1.6 kg
Parameters
Camera Compatibility	Universal
Carry/Transport Options	Handle
Type of Closure	Latch
Interior Type	Cubed Foam
Features
ATA Compliant	Yes
Pressure/Purge Valve	Yes
Security Lock	Accepts Padlock (Not Included)
General
Water Resistance	Waterproof IP67
Maximum Buoyancy	18 lb / 8.2 kg
Padded Interior	Yes
Materials	Exterior: Resin
Dimensions	Exterior 12.5 x 9.8 x 8" / 31.8 x 24.9 x 20.3 cm Interior 9.5 x 7.5 x 7.5" / 24.1 x 19.1 x 19.1 cm 1.4" / 3.6 cm (Lid Depth) 6.1" / 15.5 cm (Base Depth)
Weight	3.6 lb / 1.6 kg
Packaging Info
Package Weight	4.36 lb
Box Dimensions (LxWxH)	13.05 x 11 x 8.55"

Automatic pressure release valve
IP67 dust and waterproof
Lightweight and impact-resistant NK-7 resin
PowerClaw latching system

Related Questions and Answers

Q: 1. Will this case fit a Sony A7Sii?

A: Hi, yes, this case can be used for an A7s II.

Q: 2. can I purchase the foam separately? Thanks!

A: Yes you can, they are available in the accessories page.

Q: 3. Would the Canon EF 70-200 f/2.8 fit there? Its length is 8.5 inches, but I read that 24-105 f/4 would be the largest, which is much smaller ...

A: The Canon EF 70-200mm f/2.8L IS USM lens would be just a bit too long to fit this case.

Q: 4. Does it come with the padded insert or is the interior empty?

A: Nanuk 940 Pro Photo Kit/Camera Case (Black) BH #NA9406001 comes with adjustable Nylon Padded Dividers.

Q: 5. Carry-on size for most airlines?

A: No, the Nanuk 940 Pro Photo Kit does not meet carry on regulations.

Q: 6. Is this the’6 lens case?’

A: The Nanuk 908 Hard Case with Foam Insert has interior dimensions of 9.5 x 7.5 x 7.5 inches. So it would not hold 6 lenses. The average size of a 6 lens case is about 15x10x9 inches.

Q: 7. Where are they made?

A: This case is made in Canada.

Q: 8. Will this fit a DJI Mini 4 pro combo ( with the controller ) ??

A: When folded with the controller, the DJI Mini 4 Pro Drone Fly More Combo Plus with RC 2 Controller will fit in the Nanuk 910 Hard Utility Case with Foam Insert (Lime).

Q: 9. Does the DJI Remote Controller Pro fit in the Nanuk 915-MAV36?

A: No. This Nanuk 915 Waterproof Hard Case with Insert for DJI Mavic 3 (Olive), would only fits the Standard Remote.

Q: 10. Will the Sony A1 fit in this case?

A: The Sony A1 is a bit larger than the A7R, so there is no guarantee that it will fit into the 920 Case.

Andrew	27/09/2024
[Cubed Foam] Super satisfied with this Nanuk 908 case. I use it to protect and transport a Lumix BS1H. I am able to store the camera body, two batteries and two lens adapters in the case. Gives me peace of mind and is quite practical. This is my second Nanuk case. Made in Canada is a bonus. 5

Roddy	17/09/2024
[4.36 lb] Great small case 5

Robert	11/08/2024
[Handle] good quality and smooth latch 5

David	02/08/2024
[Cubed Foam] I bought this because Pelican did not offer a case size that would work for what I need to store. After receiving it and placing it next to a similar sized but slightly smaller Pelican case--in my opinion it is a better made case. B&H Camera really did a great job as a seller. Fast shipping, great communication, and put out a copy of the credit card receipt in the shipping box. I am very happy with everything and will buy more of the Nanuk cases from B&H. 5

kevin	16/07/2024
[Universal] will use for whatever i have a use for at the time 5

kevin	03/07/2024
[Olive Green] can be used for any thing i can use the case for 5

MARTIN S.	25/06/2024
[Olive Green] It was a good deal ... especially on sale. It comfortably holds my D850 with Tamron 24-70 or 15-30 lens with room to squeeze in an extra battery or card, etc. The latches are particularly stout and won't open accidentally. Overall it's a great case compared to other more expensive brands. I'm not going to throw it off a building but I'm sure it will handle most anything I'm going to subject it to. 5