Nanuk 908 Hard Case With Foam Insert, Graphite, 8.8L

Nanuk 908 Hard Case With Foam Insert, Graphite, 8.8l

Product Code: eq45533
Availability: In Stock

$245.19 $323.65

Qty

8 reviews Write a review

Description
Reviews (8)

This graphite Nanuk 908 Hard Case with Foam Insert, Graphite, 8.8Lfrom Nanuk has an 8.8L capacity and a foam insert to protect your delicate items during storage and transport. The case accommodates photo/video gear, batteries, lenses, flash drives, hard drives, microphone systems, pistols, fishing gear, binoculars, scopes, medical devices, instruments, industrial tools, or other equipment. Made from dust, crush, and waterproof NK-7 polypropylene resin, it has a cubed foam insert so you can customize the interior for your specific needs. There is a convoluted egg crate foam layer for the lid and a solid base layer for the bottom.

Its molded-in bezel and gasket are held fast with two PowerClaw latches that use compressive force to keep the case closed to a dust and waterproof IP67 rating. An integrated slide lock prevents the case from opening during transport or if dropped. For additional security, the case accepts user-supplied padlocks. It has a built-in pressure release valve that regulates the internal pressure, allowing you to open the case without having to break a tough pressurized seal that may develop during air travel. Further design features include an integrated lid stay that prevents the lid from closing on your hand, rustproof and strong stainless steel hardware, and a foldable soft-grip top handle. This case can be stacked with other Nanuk 908 cases for convenient storage.

Dust, Crush, and Waterproof Customizable Cubed Foam Insert Lightweight NK-7 Polypropylene Resin 2 PowerClaw Latches Automatic Pressure-Release Valve Molded-In Bezel System and Padlock Holes Integrated Lid Stay for Safe Access Comfortable Soft-Grip Handle Stackable with Same-Sized Cases

Key Specs
Color	Gray
Carry/Transport Options	Handle
Type of Closure	Latch
Interior Type	Cubed Foam
Water Resistance	Waterproof IP67
Dimensions	Exterior 12.5 x 9.8 x 8" / 31.8 x 24.9 x 20.3 cm Interior 9.5 x 7.5 x 7.5" / 24.1 x 19.1 x 19.1 cm 1.4" / 3.6 cm (Lid Depth) 6.1" / 15.5 cm (Base Depth)
Weight	3.6 lb / 1.6 kg
Parameters
Camera Compatibility	Universal
Carry/Transport Options	Handle
Type of Closure	Latch
Interior Type	Cubed Foam
Features
ATA Compliant	Yes
Pressure/Purge Valve	Yes
Security Lock	Accepts Padlock (Not Included)
General
Water Resistance	Waterproof IP67
Maximum Buoyancy	18 lb / 8.2 kg
Padded Interior	Yes
Materials	Exterior: Resin
Dimensions	Exterior 12.5 x 9.8 x 8" / 31.8 x 24.9 x 20.3 cm Interior 9.5 x 7.5 x 7.5" / 24.1 x 19.1 x 19.1 cm 1.4" / 3.6 cm (Lid Depth) 6.1" / 15.5 cm (Base Depth)
Weight	3.6 lb / 1.6 kg
Packaging Info
Package Weight	3.9 lb
Box Dimensions (LxWxH)	12.9 x 10.9 x 8.3"

Automatic pressure release valve
IP67 dust and waterproof
Lightweight and impact-resistant NK-7 resin
PowerClaw latching system

Related Questions and Answers

Q: 1. Case dimensions ?

A: Under the specs tab on our website is listed; Exterior Dimensions 22 x 14 x 9" / 55.9 x 35.6 x 22.9 cm Interior Dimensions 20.5 x 11.3 x 7.5" / 52.1 x 28.7 x 19.1 cm

Q: 2. The product itself is well made and I don't think I will need warranty repairs. But, if I do, according to the NANUK website, the case needs to be sent to Canada. Is there no where else other than Canada to sent the case for repair?

A: As Plasticase, Nanuk's manufacturer, is located in Quebec, Canada, any repair that cannot easily be done by the customer via replacement parts from the manufacturer will require you to ship the Nanuk 908 Hard Utility Case with Foam Insert (Black) back to Plasticase/Nanuk for inspection and/or repair via their Limited Lifetime Warranty.

Q: 3. Will this fit a DJI Air 2S Drone and controller? I am concerned about the depth.

A: It will be a tight fit with the DJI RC-N1 Remote Controller provided with the DJI Air 2S Drone to fit in the Nanuk 910 Hard Utility Case with Foam Insert (Orange) when it is right side up. The foam will press the DJI RC-N1 Remote Controller. An alternative case to consider is the Nanuk 915 Hard Utility Case with Foam Insert (Orange). See the link below: https://bhpho.to/3wtxQms

Q: 4. What is the diameter of the lens cavity?

A: While the manufacturer does not list the diameter of the lens cavity, it can easily hold a lens that is 3" or smaller in diameter.

Q: 5. Is this the’6 lens case?’

A: The Nanuk 908 Hard Case with Foam Insert has interior dimensions of 9.5 x 7.5 x 7.5 inches. So it would not hold 6 lenses. The average size of a 6 lens case is about 15x10x9 inches.

Q: 6. Would an assembled C100 mk ii (top handle attached, and Canon EF 24-70 lens mounted) fit in this case?

A: Based on the measurements it would be a very tight fit and not recommended. Another choice that would work is https://bhpho.to/39ftveq

Q: 7. Is the foam cubed that I need to cut out or is the foam cutout the way it shows in the picture?

A: The foam is pre-cut into the configuration shown in the images. For the standard cubed foam configuration, please see https://bhpho.to/363A8N4

Q: 8. Hi, is the indicated price includes shipment to Singapore?

A: Add the item to the cart online to calculate shipping to your address for the Nanuk 950 Protective Rolling Case.

Q: 9. Will this case fit a Sony A7Sii?

A: Hi, yes, this case can be used for an A7s II.

Q: 10. Will the Sony A1 fit in this case?

A: The Sony A1 is a bit larger than the A7R, so there is no guarantee that it will fit into the 920 Case.

Airhole	25/09/2024
[Handle] I put a Lumix S-5 with a 20-60 lens in this and it feels like I could throw it off a building into a fountain and not worry about it. Happy to carry this and use my bag for other lenses, mics, Beachtek, Ninja, etc. 5

Jody	23/08/2024
[Cubed Foam] Lightweight and very sturdy. Foam easy to cut upper layer! 5

Scott J.	15/08/2024
[Cubed Foam] Extremely fast shipping quality design and materials, Black Friday purchase nice loud color. 5

MARTIN S.	03/07/2024
[Cubed Foam] It was a good deal ... especially on sale. It comfortably holds my D850 with Tamron 24-70 or 15-30 lens with room to squeeze in an extra battery or card, etc. The latches are particularly stout and won't open accidentally. Overall it's a great case compared to other more expensive brands. I'm not going to throw it off a building but I'm sure it will handle most anything I'm going to subject it to. 5

kevin	01/06/2024
[Gray] can be used for any thing i can use the case for 5

David	08/05/2024
[Gray] I bought this because Pelican did not offer a case size that would work for what I need to store. After receiving it and placing it next to a similar sized but slightly smaller Pelican case--in my opinion it is a better made case. B&H Camera really did a great job as a seller. Fast shipping, great communication, and put out a copy of the credit card receipt in the shipping box. I am very happy with everything and will buy more of the Nanuk cases from B&H. 5