Ioptron Lithium-Ion Battery For Ipano Allview Mount

Ioptron Lithium-ion Battery For Ipano Allview Mount

Product Code: eq45623
Availability: In Stock

$135.00 $201.15

Qty

10 reviews Write a review

Description
Reviews (10)

Use the iOptron Lithium-Ion Battery for iPano AllView Mountas a replacement or a spare to keep your iPano AllView camera tracking mount operating at peak performance. This battery is identical to the one that originally shipped installed in the mount, with a 4400mAh capacity, over charge/discharge protection thanks to its built-in IC chip, and since it suffers from no memory-effect it can be recharged at any point in the discharge cycle.

Factory Replacement Part 4400mAh Capacity No Memory-Effect Over-Charge/Over-Discharge Protection

Parameters
Battery Chemistry	Rechargeable lithium-ion
Capacity	4400 mAh
Output	7.2 V; 8.4 V, peak
Dimensions	1.75 x 1.5 x 1.5" / 68.0 x 38.0 x 38.0 mm
Weight	6.5 oz / 185.0 g

Related Questions and Answers

Q: 1. What are the little clear bottom on the side of the RL-Batt 95? It has some little dots that increase - decrease I am plugging it my I don’t see it turn on How do I know when the battery is full?

A: That is a battery test button, you push the clear button and the lights tell you how much power is left on the battery.

Q: 2. Watson Pro Single-Position Li-Ion Battery Charger?

A: Yes, You can use the Watson Dtap charger to charge the Juicebox 95Wh Lithium-Ion Battery. Watson Pro Single-Position Li-Ion Battery Charger with D-Tap Output BH #WACSPT

Q: 3. will this battery will work with the Aputure 200c light?

A: Yes, the GVM 99Wh Lithium-Ion V-Mount Battery is compatible with the Aputure 200 monolight.

Q: 4. Can this be charged with a Core X2 charger?

A: Yes, you can charge a Juicebox Lithium-Ion Battery with a Core X2 Charger. This is not recommended since CoreSWX chargers and batteries use a specific chip that is most efficient with their ecosystem.

Q: 5. Can two of these 310s be used to run battery power to the Titan X1 on a v-mount adapter?

A: Yes you would need the Rotolight 2-Way V-Lock 24V Battery Adapter, BH # ROVL224 along with the two batteries to run a Titan X1. https://bhpho.to/3xogKW9

Q: 6. Does the battery come with a charger? I'm assuming no, but just want to confirm.

A: It does not come with a charger. You can get one here https://bhpho.to/3a1e1GF.

Q: 7. Can this power a blackmagic 6k? if so, how may hours could i get when shooting?

A: Rough estimate of 6 hours.

Q: 8. Can this be charged with an Anton Bauer TM4 Logic Series?

A: Yes it should however we can not guarantee consistent results. Anton Bauer has firmware built into their batteries that talk to the chargers If you attempt to charge other batteries on the charger it may stop charging without warning. It is best to charge this battery via the included D-Tap charger.

Q: 9. How many Amps does it out put?

A: This battery puts out approximately 8 Amps (based on the formula: Amps = Watts / Volts). // Also, if there are any other technical or product related questions, feel free to contact us directly at any time at support@dracobroadcast.com.

Q: 10. Does this Vmount work with other vmount led lights?

A: It will work on any V mount battery that does not have a high draw requirement.

Bill	13/09/2024
[4400 mAh] Thanks B&H 5

Karl	09/09/2024
[4400 mAh] No Charger needed. Just plug it into the wall with a computer power cord (not included). Works fine. I use it to power Ikan Video lights. 5

Michael	06/08/2024
[4400 mAh] I really wanted the 150 watt V-Mount but right now they seem very hard to get from JuiceBox so I got the 95watt V-Mount. It did its job without problems. I was happy with the out come. 5

Jared	22/06/2024
[4400 mAh] Pros: An affordable V Mount battery that doesnt need an external charger. Charges with a standard PC power cord. Rubberized surface makes it feel durable and easy to grip. Cons: Its a little difficult to get the battery onto some of the Dracast v mount lights. Once on the lights it works, but never snaps in. Otherwise love the battery so far! 5

Gerald	15/06/2024
[4400 mAh] The Ioptron AZ Mount Pro is hefty enough for my needs The lithium Battery lasts hours BUT you do need a charger B&H is a convenient a reliable place to secure one 5

Stan	18/05/2024
[4400 mAh] Easy to charge! 5

Michael B.	17/05/2024
[4400 mAh] I love having this for my Dracast LEDs. I can power an LED500 for 2 hours with this. Charges overnight in about 6-7 hours (from 100% dead). Don't need separate charger for this 95Wh (the smaller 90Wh battery needs a separate charger). Very handy to have good light without an AC outlet. 5

Mike	11/05/2024
[4400 mAh] Work great. I like the built in charger though I have the Dracast dual charger I use with previous batteries. Contrary to another reviewer's comment, mine did come with a cable that plugs the unit into a wall socket to charge it. The USB socket will charge a phone, you need to punch in the button on the side for the USB to power up. Would be handy if they included an instruction sheet to explain this. 5

Hudson Henry	14/04/2024
[4400 mAh] I use it with a Dracast LED1000 light for location photo and video work. It's light, has a built in charger and gives me lots of light in remote locations. 5

Richard	30/11/-0001
[4400 mAh] These days, I often order online and pick up in the store to save time (and not tempt myself with purchasing more gear). It was smooth and fast, as always. 5