16Mm Rod Set 5.9" Solutions

16mm Rod Set 5.9" Solutions

Product Code: eq45675
Availability: In Stock

$59.97 $88.16

Qty

18 reviews Write a review

Description
Reviews (18)

Rigging is a method of building, supporting, and suspending a camera or lighting equipment in different ways on a movie set or in a photographic studio when conventional support does not accommodate the equipment. Therefore, the 16mm Rod Set 5.9" SOLUTIONSfrom 16mm Rod Set 5.9" SOLUTIONSaids in building this kind of support.

The 5.9" long rods connect together with the included rod connector which has the same 3/8"-16 thread diameter as the rods on each end. At the same time, the rod connector enables the rods to connect at a 90° angle. Moreover, the aluminum Rod Set is compatible with a variety of rigging accessories such as gags, clamps, and suction cups. Because of 3/8"-16 thread diameter, 9.5mm rods are capable of attaching to 16mm rod via the rod connector.

1-Set of 5.9" Long Rods 3/8"-16 Threads on Both Ends of the Rod Includes One Rod Connector Used for Rigging Lights and Cameras Used with a Variety of Other Accessories Manufactured from Aluminum 9.5mm Rod also Attach to 16mm Rod Rods Able to Connect at a 90° Angle

Key Specs
Connections	2 x 3/8"-16 Female Thread
Length	5.9" / 150 mm
Parameters
Length	5.9" / 150 mm
Width	0.63" / 16 mm (Rod Diameter)
Weight	1.9 oz / 54 g (Rod) 1.12 oz / 32 g (Connector)
Packaging Info
Package Weight	0.345 lb
Box Dimensions (LxWxH)	7.55 x 2.2 x 0.85"

Aluminum rods are 5.9" long

3/8"-16 threads on both ends of each rod

16mm rods can connect at a 90° angle via the rod connector

9.5mm rod can connect to a 16mm with a rod connector

Related Questions and Answers

Q: 1. Does this reflector come with the protective sleeve/pouch?

A: Yes, all Cine Reflectors come with a neoprene sleeve.

Q: 2. are they threaded ?

A: No, these are not threaded.

Q: 3. can the rod fit into a 2.5 inch grip head so it can be positioned at an angle?

A: The 9.SOLUTIONS 16mm Rod Set (19.7") can fit into a 2.5 inch grip head so it can be positioned at an angle

Q: 4. Is there a 1/4” 20 version of this?

A: There is only this version with the 3/8 thread.

Q: 5. Is each rod 500mm, or do they combine to be 500mm?

A: Each rod is 500mm long.

Q: 6. Is this also for rod extension?

A: This product does not list threading within the rod to allow extension. SmallRig aluminum rods offer threading.

Q: 7. Does this come with a bag?

A: No, the following unit does not come enclosed with a bag.

Q: 8. Are these the version 2.0?

A: Yes, that is version two.

Q: 9. Is the mounting rail same as Lightstream?

A: No, the mounting rail for the LightBridge Diffusion #4 C-Reflector (Super White , 9.8 x 9.8") is not the same as for Lightstream.

Q: 10. what length is the bag for this softbox?

A: 48 inches.

Bruce	17/09/2024
[0.345 lb] These are the only baby pins I own, so based on that, they feel super high quality in my hand, very nice finish on them, they screw effortlessly. Overall very nice. Now if I can only find more used for them! 5

Prokhor Pk	29/08/2024
[0.345 lb] Nice quality rods, and paint never chips away, unlike some other brands. Also, feels like they can hold a tank up! 5

Richard	26/08/2024
[0.345 lb] does the job 5

Iaroslav	18/08/2024
[0.345 lb] This extension rods are really solid and weight a lot cause made of stainless steel. Nice buy if you need a rock solid setup and you want to set up a heavy weight cameras on the rods. 5

Scott	07/07/2024
[0.345 lb] These rods are solid and can hold the load. 5

Pierre	23/06/2024
[0.345 lb] This is a good solid piece. Smooth finish, no rough edge. Does not flex which is a good thing. I only attached 20lb. on studio gear and the rod did not bend. 5

Cameraman steve	22/06/2024
[0.345 lb] These rods work well to extend my hand held rig 5

Rodolfo	22/06/2024
[0.345 lb] Need a baby pin that does more? These things do the trick. Note that this set of two pins are in fact two different styles: One pin that has a 3/8-16 female connector on both ends with a 3/8-16 removable bolt. One pin that has a 3/8-16 female connector on ONE side and a MALE connector on the other side with a removable threaded washer. They can connect to create one Big Baby Pin (Toddler Pin?). With some additional connectors/washers these thing make great legs for the Inovativ DigiPlate which is primarily how I am using them. 5

travis	15/06/2024
[0.345 lb] Great price for Rods...don’t over think it or get sucked into brand names when it comes to rods... 5

Conrad	29/05/2024
[0.345 lb] I used this in combination with a Pedco UltraMount Universal Ball Head, an Impact Small 3/8" Female Threaded Adapter to 1/4"-20 Male Threaded Post, a Vello Cold Shoe Mount with 1/4" thread, and a lock nut from a Rycote 037302 Hot Shoe Adaptor to attach a Rode Video Mike to my Manfrotto Fluid Drive Head. This freed up the camera hot shoe to hold another accessory, and moved the mike to a position where it was out of my way and less likely to pick up camera sounds. You would think that an item like this would be commercially available as a unit, but every "magic arm" I found was more complex, more expensive and still required some more hardware to complete the link. The setup works perfectly. 5