[14.1 oz / 400 g] This is a professional equipment to keep your connection stable during livestream! You can have two connections for redundancy to avoid loose of signal. 100% recommended.

[CE, RoHS] Bought this and its matching tx. They seem pretty good. You can select different definitions, FHD, HD, SD, and then can assign them to the 3 types, and allocate bit rates for each. Eg you can select HD, send that to SD and a bit rate of 800 and FHD to HD and a bit rate of 2000 etc. It then selects the resolution type, eg 720P. The only limitation I find a bit strange is that the full range of resolutions, are not available all the time. They vary what is available depending on the Hz, 50Hz or 60Hz of the incoming HDMI. I am using 60Hz, and this does not have 1080i, but if I was using 50Hz, then 1080i would be included.
60Hz has 480i, 480P, 720P, 1080P.
50Hz has 576i, 576P, 720P, 1080P, 1080i.
The other strange thing I notice is that if I select a bit rate of 800Kbps, and then monitor the link at the IP level, it seems to be using about 3.5Mbps.
However, for quality and ease of use, these seem to be great devices.

[14.1 oz / 400 g] it is like a swiss army knife in my kit.  someone needs a popup input it just works... need an overflow feed it just works

[14.1 oz / 400 g] Bought this and its matching rx. They seem pretty good. You can select different definitions, FHD, HD, SD, and then can assign them to the 3 types, and allocate bit rates for each. Eg you can select HD, send that to SD and a bit rate of 800 and FHD to HD and a bit rate of 2000 etc. It then selects the resolution type, eg 720P. The only limitation I find a bit strange is that the full range of resolutions, are not available all the time. They vary what is available depending on the Hz, 50Hz or 60Hz of the incoming HDMI. I am using 60Hz, and this does not have 1080i, but if I was using 50Hz, then 1080i would be included.
60Hz has 480i, 480P, 720P, 1080P.
50Hz has 576i, 576P, 720P, 1080P, 1080i.
The other strange thing I notice is that if I select a bit rate of 800Kbps, and then monitor the link at the IP level, it seems to be using about 3.5Mbps.
However, for quality and ease of use, these seem to be great devices.

[CE, RoHS] I recommend this product for a ling distance transmission over ip

[2.19 lb] These units are ideal for instant connect up and they work. You can customise the bit rate and it keeps the video smooth. One TX can feed many RX.

[2.19 lb] Bought this to provide better video stream than my JVC GY LS300's RTSP feed (it has a big delay and sketchy feed). This is magnificent uncompressed quality. Already have a NewTek connect Spark, but this makes production a breeze. Been using it with a Church client's live stream and convinced them to go with Bird Dog products. They're not gonna regret it.

[10.6 x 6.1 x 4"] We replaced our old cable provider Nano box which was 480p with the VeeZee VZPro810 set-up was simple, transferring the settings from the nano to the VZ was straight forward.
Had to contact VeeZee once via Email and the customer service was spectacular, quick response time and a plethora of good information

[CE, RoHS] There's so many protocols to work with in this little box, and decodes practically anything thrown at it.

It's not an entry level unit but it's very very good and VITEC keeps improving it

[10.6 x 6.1 x 4"] Almost any camcorder produced before 2018 doesn't have NDI capabilities but with the addition of the Birddog Mini, you can make a leap into the world of networked video without any heavy lifting.

Excellent choice for any church or school that needs to stream video but doesn't want to incur the cost of wiring for video. Any HDMI source can be plugged into the Mini and using a local network, connected to a computer with a streaming application such as vMix or OBS. No capture card necessary - it just works.

This is a device that needs to be in the toolbox of any serious videographer.