Cinegears Start/Stop Trigger Cable For Arri 26"

Cinegears Start/stop Trigger Cable For Arri 26"

Product Code: eq46187
Availability: In Stock

$237.00 $369.72

Qty

7 reviews Write a review

Description
Reviews (7)

This CINEGEARS Start/Stop Trigger Cable for ARRI 26"enables you to control the record function on your ARRI camera. Use this cable with the CINEGEARS handheld Start/Stop Trigger, Wireless Trigger, or Wireless Follow Focus Systems (each available separately). This 26" cable features a 3-pin connector on one end, and a right-angle 2.5mm jack connector on the other.

Controls Camera's Start / Stop Function For CG Handheld or Wireless Trigger For CG Wireless Follow Focus Systems 26" Cable 3-Pin to Right-Angle 2.5mm Jack

Parameters
Cable Length	26" (66 cm)
Connector 1	3-pin
Connector 2	2.5 mm jack
Packaging Info
Package Weight	0.05 lb
Box Dimensions (LxWxH)	5.7 x 4.05 x 0.6"

Related Questions and Answers

Q: 1. I use a setup of one hard wired remote along with a splitter cable and extension cable to trigger two cameras at the same time for interviews so they do not require syncing in post and for the volume of interviews that I do this setup is very important to me. I used two 5DmarkIII's before and now use one 5DmarkIII with my new C300markII. Will this or any other known remote trigger both of these cameras with one remote using a splitter cable? I tried with two intervalometers I currently have and they do not trigger the C300markII even with remote setting correctly set to standard mode unless there's something else I'm missing. Thanks for your help!!!

A: I'm sorry to say we are not aware of a solution like this that will work for both the C300 Mark II and the 5D Mark III. The C300 Mark II and 5D Mark III have different connections for remote controls, which makes this not possible.

Q: 2. Will it work with a Sony A7C? Or do I need another cord?

A: The SmallRig NATO Top Handle with Record Start/Stop Remote Trigger comes included with a Sony USB-C control cable included with the handle.

Q: 3. The A7C doesn't have a sony multi-use port, how do I connect the top handle and camera?

A: The box for the SmallRig NATO Top Handle with Record Start/Stop Remote Trigger has the needed Sony USB C cable included.

Q: 4. is the start stop compatible with the Lumix s5ii. I know its not on the list but is that because the list is out of date?

A: Yes, the Panasonic cable included with the SmallRig Threaded Side Handle with Record Start/Stop Remote Trigger should support the Lumix S5II even though it has not been tested by Smallrig.. Tested cameras list. https://bhpho.to/4aVgiSF

Q: 5. It's compatible with xt30 Fuji ?

A: Yes, The Smallrig supported camera list has been updated to include the following camera models. It will support the X-T30. All Fuji camera models that are supported (FUJIFILM X-T3/X-T4/X-T20/X-T30)

Q: 6. Will this work with the URSA Mini?

A: The Ursa Mini cameras have a standard 2.5mm LANC input. We believe that this Trigger Cable should work with the Ursa Mini.

Q: 7. The smallrig arri nato rail 1.4" is enough or do I need a bigger rail?

A: Yes, the SmallRig NATO Top Handle with Record Start/Stop Remote Trigger could work with the 1.4" Nato Rail. We also have the 1.6" option. SmallRig Quick Release NATO Rail (1.6) BH #SM1409

Q: 8. I can't seem to mount it to a Tilta cage for the Panasonic BS1H, Tilta model Tilta TA-T21-FCC-B. Any suggestions?

A: A similar handle option that would work with the Tilta BS1H cage is listed below. Please order both parts. Tilta Tiltaing Right-Side Advanced Focus Handle with Run/Stop (F570, Black) BH #TIARFH57B Tilta Advanced Right-Side Handle Adapter Type IV (Black) BH #TIAAHA4RB

Q: 9. Can this be used to START / STOP recording on an Atomos Ninja V? If so, what cable is needed?

A: According to Atomos, " The Ninja V uses LANC Slave and so a LANC controller must first be attached to a camera and the output taken out via a Y cable to the Ninja V". A similar setup would be required when using the SmallRig Threaded Side Handle with Record Start/Stop Remote Trigger to trigger a Ninja V monitor.

Q: 10. Is there a cable that will work on Olympus OM-1 or E-M1 mark III?

A: Currently the Olympus cameras are not listed as supported camera models. The SmallRig NATO Top Handle with Record Start/Stop Remote Trigger has been tested with the following camera models. Sony A7II/A7III/A7 IV/A6000/A6500, FUJIFILM X-T3/X-T4/X-T20/X-T30, Panasonic GH5/5S/GH6/G9/G95/S5/S1/S1R/S1/BGH1/BS1H and Z CAM E2/M4/S6.

Curtis	17/09/2024
[0.05 lb] very well made, and great Cust service from Cinegears 5

Shannon	16/09/2024
[26" (66 cm)] This is the answer to shooting action while you are looking through an EVF!! You can pull the record trigger on your pan handle whenever needed while you're concentrating on the scene. Works great at a great price! 5

Joshua	29/08/2024
[0.05 lb] I swear by SmallRig products. The quality is top notch and this handle is excellent for attaching to a video cage/rig. Extra points for including various cables! 5

Mallory the Photo Major	27/08/2024
[0.05 lb] This portfolio is exactly what I needed to transport my photo projects to and from class. I shopped around for quite a while looking for one that could keep things from sliding back and forth, and this was one of the few I found that could do that. It works like a charm! I was also pleased that B&H had the best price I could find online--even with shipping added in. 5

anyonymous	17/08/2024
[0.05 lb] Print protectors are very hard to come by, and these are high quality. 5

anyonymous	23/06/2024
[3-pin] Just what I was looking for and at a very good price. 5

Steven	19/06/2024
[26" (66 cm)] I shot with my GH5 Mmallrig cage and regular handle for a year. This has made my life so much better. Puts the trigger right where I need it. Another piece of Smallrig genius. 5