Lulzbot Taz Pei Sheet For 3D Printing

Lulzbot Taz Pei Sheet For 3d Printing

Product Code: eq46426
Availability: In Stock

$135.00 $207.90

Qty

10 reviews Write a review

Description
Reviews (10)

The LulzBot TAZ PEI Sheet for 3D Printingfrom LulzBot TAZ PEI Sheet for 3D Printingis a direct replacement for the PEI (polyetherimide) print surface on their TAZ 6, TAZ 5, TAZ 4, TAZ 3, TAZ 2, and TAZ 1 3D Printers. When properly cleaned and heated to the recommended temperatures, your print will adhere well to the print bed during printing and release from the print bed once cool. This PEI sheet has functional dimensions of 11.8 x 11.8", with additional material in the width and length to allow users to trim in order to fit their product, while also allowing for a more aligned and finished edge.

For the LulzBot TAZ 6, TAZ 5, and TAZ 4 For the LulzBot TAZ 3, TAZ 2, and TAZ 1 Replaces the TAZ's PEI Print Surface Helps Prints Stick Well & Release Easily

Parameters
Dimensions	11.8 x 11.8 x 0.04" / 300 x 300 x 1.02 mm
Weight	Not specified by manufacturer
Packaging Info
Package Weight	0.15 lb
Box Dimensions (LxWxH)	12.45 x 11.85 x 1.55"

The PEI sheet comes prepared with a self-adhesive layer already applied to make installation quick and user-friendly.

Related Questions and Answers

Q: 1. What laptop would you recommend to use with your software?Also, I was anticipating to project the photowall from the laptop to a tablet wirelessly (tablet will act as monitor). Will this be possible with your software?

A: The requirements are: Windows 7 (32 and 64 bit)Windows 8 (32 and 64 bit) i3 or i5 processor with at least 4 GB of RAMPCs and tablets running Celeron or Atom processors are not recommended so any device that meets those requirements will work well.

Q: 2. Can the Sheet Feeder be left on the plotter or does it have to be removed, when plotting on the 24" roll ?

A: The Auto Sheet Feeder T200 does not need to be removed when printing on a roll. . It allows you to send to print multiple sheet sizes (A4/A & A3/B) without manually switching the media source (sheet to roll).

Q: 3. can I buy smaller quantity?

A: Not by Tiffen unfortunately, but the following would be a smaller quantity: https://www.bhphotovideo.com/c/product/1015098-REG/sensei_lctp_50_lens_cleaning_tissue_paper.html

Q: 4. how many devices can you install on for one person?

A: The AirTurn Power Music Professional - Sheet Music Management Software allows installation by one user on up to two PCs.

Q: 5. What type of plastic are these made of?

A: Unfortunately, the manufacturer does not publish this information.

Q: 6. is this archival?

A: used with InkThrift CL inks, I have seen no noticeable fading behind glass on display for several years, albeit a very unscientific review. I static mount prints to plexiglass and glaze with truvue ultraview 70. overall product yields prints that rival the brilliance of cibachromes of yesteryear without the contrast issues.

Q: 7. If I had ordered, with UPS Worldwide Saver, when arrival Taiwan Taipei?

A: You may calculate your actual shipping options/order totals by adding the items you want to a shopping cart. It will then list the shipping options, descriptions, ETA's and fees to your location.

Q: 8. What paper type setting should I use when printing this film on my Epson HD -15000 photo printer?..thanks.

A: Generally this would take some testing. If you see any for film I would start there. Or glossy setting options. I am not seeing Pictorico makes an ICC profile for this particular Epson that I can find but you could also try asking them directly.

Q: 9. Are there ICC profiles for this product?

A: No, there are no ICC profiles from Pictorico for the Pictorico Pro Hi-Gloss White Film for Inkjet Printing (8.5 x 11", Letter).

Q: 10. Is it possible to just buy the clamping unit? Mine fell off and I need a new one.

A: Unfortunately B&H does not carry replacement parts for the MS303. In many cases parts can be obtained from Quiklok directly. a href= http://bitly.com/1Etqwma target= _blank http://bitly.com/1Etqwma/a

Gary	29/09/2024
[0.15 lb] These wiper pads are a consumable on the Lulzbot printers so you want to keep them on hand. I buy them every few months. 5

Brian	23/09/2024
[0.15 lb] No more wasted time & filament. I ordered the Lulzbot filament Runout sensor and installed it on the Lulzbot Taz 6. The install was fairly simple. I have the filament mounted on the top not the side, so I had to print a new adapter to attach it to the top of the frame. I wired it up, fired it up and it worked great. No more wasted filament or stressing if I was going to run out before the print is done! 5

Larry	11/08/2024
[0.15 lb] This is my second 3d printer. It is a fabulous printer the build size is limiting. The performance and print quality are spectacular. Very quiet also. 5

Bryce	17/07/2024
[0.15 lb] After spending a great deal of time with the original mini in an educational environment, I decided to order my own mini 2. Great print quality, a breeze to use, and nearly silent operation! 5

Harrison	05/07/2024
[0.15 lb] I had been looking around, where most websites were sold out. I ordered them even though they were out of stock, and only about a week later they came in. The product is very good, these are a little tougher than the original pads, and I think this is an improvement. Previous ones were falling apart very quickly where as these seem like they will hold up over some heavy usage. I've gotten in about a dozen prints so far, and its done its job. Hard to go wrong with an improved replacement of the part you need. Thanks BHPhoto and Lulzbot! 5

Brad	08/06/2024
[0.15 lb] Correct product delivered on time with reasonable shipping costs. 5

Jerry	07/06/2024
[0.15 lb] I got this product cheaper on B&H vs. the manufacturer. Completely satisfied!!! 5

Patrick	29/04/2024
[0.15 lb] No more glue layers, no more scrubbing residue clean and applying a new glue layer just for my printer to hold a layer. 5

Stuart	24/04/2024
[0.15 lb] As a 3d printer user in the UK it is sometimes difficult to get genuine OEM spare parts. I have tried to order these several times directly from Lulzbot but each time they cancelled my orders without any explanation. So happy that I have found a reliable supplier willing and able to fulfil my order without any fuss. Thank you so much. 5

Jeffrey	03/04/2024
[0.15 lb] Handled everything I threw at it. Quick startup. Printed in sla and ngen so far. Multiple colors. Swapping filaments took a little experimenting. Found it best if you cut filament at 45 degree angle before attempting to feed new spool into head. Very quiet. 5