The Beseler Printmaker 67 Dichro is a full-featured American made enlarger that can produce excellent enlargements from any 6x7cm or smaller negative or transparency including 35mm.

The Dichro-S colorhead that is supplied with this enlarger has dial-in continuously variable permanent, non-fading 0-200 yellow, magenta and cyan filters, that make it easy to print from color negatives or from color slides. They are also an excellent and convenient ways of printing on variable-contrast black & white papers.

The colorhead also has a white light position for fast, accurate focusing. The Printmaker 67 Dichro enlarger is at home in any darkroom, but its compact size makes it a particularly good choice for use in a small darkroom, and its ease of assembly and storage are much appreciated attributes for a temporary or portable darkroom.

The Printmaker 67 Dichro can produce prints up to 11 x 14" on the baseboard and much bigger enlargements by reversing the column and projecting onto the floor

Counterbalanced elevation system

The focus knob can be attached for left or right hand use

A below-the-lens accessory holder and a built-in calibrated column elevation scale are supplied with the enlarger

Below lens Accessory holder

Related Questions and Answers

Q: 1. I need to order replacement bulbs for the Beseler Printmaker 67. What bulb do I need?

A: You can use the Impact ESJ Lamp (85W, 82V).

Q: 2. Does it come with 35mm 6x4.5,6x6 and 6x7 negative carriers ?

A: No, it does not. As indicated under the In The Box section under the Overview for the Beseler Printmaker 67 Condenser Enlarger, the following items are listed as included with the enlarger:In the BoxBeseler Printmaker 67 Condenser EnlargerCounter-Balanced Column and Chassis6x7cm Condenser Lamphouse with Internal Filter HolderBelow-the-lens Accessory Holder with Red Safety FilterPH 140 BulbWhite Laminated BaseboardLens Kit Includes: 50mm 3.5 Beslar Lens, Standard Lensboard, 35mm Negative CarrierOne-Year WarrantyThe Beseler 35mm Glassless Negative Carrier for Printmaker 35 and 67 Enlargers is the only option listed as included in the kit. All other negative carriers must be purchased separately, and are listed under the Enlarger Hardware section under the Accessories tab on our website.

Q: 3. Does it have negative carriers for 6x9?

A: It does not include the 6x9 negative carrier.

Q: 4. Does this enlarger do colour film?

A: No,the Beseler Printmaker 67 Condenser Enlarger is a black and white system. One needs an enlarger with a color head to print color negatives. https://bhpho.to/2JM0Lw4

Q: 5. In which voltage does this enlarger come? 110V or 240V? Do you have 240V models?

A: Please take a look at the following link for the 230v version: https://bhpho.to/2WVXPVt

Q: 6. how do you open the enlarger to change the bulb?

A: The lamp house at the top comes off, where it is labeled VC67 is a door that opens where you can change the bulb.

Q: 7. Will the Beseler Printmaker 67 Dichro (Color) Enlarger with Lens Kit print my 35mm negs or do I also need to get a different mixing box?

A: The Beseler Printmaker 67 Dichro (Color) Enlarger with Lens Kit will do a good job printing your 35mm negatives.

Q: 8. What is the model type of Standard Lensboard included in the box? Can it be accepted to 90mm Lens? If not, what model i should buy?

A: The included lens board can accept a 90mm enlarging lens that uses a 39mm jam nut.

Q: 9. Can it be converted to a diffuser enlarger by getting a Beseler 67S color head? Thanks!

A: Yes, you may convert the Beseler Printmaker 67 Condenser Enlarger to a diffuser enlarger by getting a Beseler 67S Color Head.

Q: 10. Does this enlarger have a Diffusion head?

A: Yes, the Beseler Printmaker 67 Dichro (Color) Enlarger does feature a diffusion head.