Made of injection-molded ultra-high-strength polypropylene copolymer resin, this SKB 3i-Series 4213-12 Waterproof Utility Case with Dividersis built to withstand the most extreme and demanding shipping and handling conditions on the planet. The large 42.5 x 13.5 x 12.2" interior is completely empty, so you can customize it to your needs using an optional interior foam and dividers set or your own creativity and materials. Three snap lock handles provide carrying options, or you can use one of the end handles to tow the case behind you on its wheels if it's too heavy to carry. This is the ideal case for longer gear like A/V equipment, microphone stands and booms, mixers, or musical and percussion instruments and accessories.

Design features include gasket sealing that makes the case dust and waterproof, a molded-in hinge for added strength, seven stainless steel reinforced padlock holes, and six trigger release latches arrayed around the case on three sides that seal the interior tight. The case is further resistant to a variety of hazards that you may encounter such as impacts, ultraviolet (UV) radiation, solvents, corrosion, and even fungi. A pressure relief valve comes into play especially during air transport by regulating the internal pressure, keeping your gear and the case from getting crushed and allowing you to open the case without having to break a tough pressurized seal that may develop.

Spacious 42.5 x 13.5 x 12.2" Interior    Ideal for Longer Equipment & Accessories    Customizable Foam Divider Set & Lid Foam    Polypropylene Copolymer Resin Body    UV/Solvent/Corrosion/Fungus Resistant    Telescoping Handle with Tow Wheels    Seven Secure Trigger Release Latches    Automatic Ambient Pressure Relief Valve    Molded-In Hinge and Padlock Holes

Related Questions and Answers

Q: 1. Would this fit 1 Aputure 120D II and 1 Aputure 300D II? I'm planning in buying both and want a case big enough to pack them together and try and put the light stands in it too.

A: Both lights plus 2 stands under 34 inches (folded) should fit, as well as some cords and accessories. Removing the reflectors from the lights will allow for more packing options.

Q: 2. can I get it with layered foam (each layer is a solid piece)? I want to cut my own and don't like cubed foam coming apart

A: The SKB iSeries 3613-12 Waterproof Wheeled Utility Case (with Foam Insert) comes with a non-precut foam.

Q: 3. Will the 12' manfrotto alu master stacking stands fit in the SKB 4213-12?

A: Hi Eric, I haven't tested that particular stand so I can't say for certain. Just to confirm I believe you're talking about model number 1004BAC. It looks like the collapsed height is 42.13 . The internal measurement of the case with the padded dividers is close to 41.5 . If you put the stand in at an angle it might fit. Besides that you could also look at our 3i-4719-8B-L case. That would come with layered foam so you could cut compartments for the stands and other gear. Thank you,Will

Q: 4. Is there a laptop pocket in the lid?

A: The lid organizer in the SKB iSeries 1510-9 Waterproof Utility Case features three separate laminated zippered clear mesh pockets for storage of cables, lens caps, or other small accessories. Behind the pockets is a polyester-lined tablet/small laptop top-load pocket

Q: 5. Would this fit: 3 Godox UL150 3 Godox barn doors 3 Aputure Fresnel(2x) 3 light stands 1 Aputure light dome II Some other accessories like gels, flags, etc ??? Thanks

A: Yes , there should be room for all

Q: 6. It says "Layered Foam" does this mean it has multiple layers of the foam - and if so how thick is each layer - or is it just one piece?

A: Yes the layered foam on the SKB 3i-Series 4213-12 Wheeled Waterproof Utility Case is divided in 5 sections each one approximately 2.6'' thick.

Q: 7. Is there an optional storage option for the lid?

A: Unfortunately, there is no lid organizer compatible or dedicated to this case. The lid on the case is 36 x 13.5 and has a 2" depth. YOu can use the BH #PELO1510 but it won't be a perfect fit.

Q: 8. How many light stands do you think this would comfortably hold? Considering using this for four smallish stands and a couple strobes, plus accessories.

A: That will depend on the size of the light stands you are using when folded up, along with the additional components you pack in to this case. This case has interior dimensions of 35 x 12.5 x 10.5", you will want to stage your gear to see if they will fit within the specs above.

Q: 9. Will Sennheiser g3 or g4 wireless hand held mics fit in this case?

A: This case has cut-out spaces that will accommodate four Sennheiser handhled transmitters.

Q: 10. Is it exactly 36" only at the top? I see it tapers down. I have a 37" item that's 3" deep, and wonder if it fits at the top?

A: Unfortunately, a 37 inch item will not fit in the SKB iSeries 3613-12 Waterproof Wheeled Utility Case (Empty). Also the top is just 2 inches deep.