The brown DPA Microphones d:fine Single-Ear Headset with Monitor Cablefrom DPA Microphones d:fine Single-Ear Headset with Monitor Cableis designed for you to create your own In-Ear Broadcast Headset. Simply mount the desired d:fine microphone boom and cable (sold separately), and you have a working d:fine In-Ear Broadcast Headset. The monitor cable is included and features a hardwired 3.5mm connector.

For Stage and Television    Hardwired 3.5mm Monitor Cable    Requires d:fine Microphone Boom & Cable

Related Questions and Answers

Q: 1. Can you change the direction of the mic boom so the head set is on the left or right ear?

A: No, it's left ear only. The boom will only go up or down. It will not spin around.

Q: 2. hello, DPA Microphone core 4288, conector 1/8 mini jack is to the sennheiser bodypack?

A: Yes that's correct.

Q: 3. Does the microphone come with a case? If yes, is it a soft or hard case? If not, do you have a recommendation? Thanks.

A: The DPA d:fine headsets ship in a padded zippered case. http://bit.ly/1nqWBtQ

Q: 4. Is this compatible with the DPA 4560 CORE Binaural headset?

A: Yes, the DPA Microphones Zip Case can be used with a DPA 4560 CORE headset.

Q: 5. Would this be resistant enough if you were recording rain sounds and its being hit by the rain?

A: Yes the DPA4560 is resistant to high levels of humidity and water, but for the best performance you should try to keep it dry if you can.

Q: 6. Can one purchase extra cables with the 3.5/sennheiser connection?

A: While not currently available at B&H, spare headset cables for the Galaxy Audio ESM8 Single-Ear Headset Mic with 4 Cables can be found at the manufacturer's website, linked here: https://bit.ly/36C5BbJ

Q: 7. DO YOU HAVE PARTS EARTEC HEADSET , LIKE MIC?

A: We do carry some replacement accessories such as power supplies, batteries and antennas, however no headset replacement parts are available here at B&H unfortunately.

Q: 8. Is this Eartec Proline headset compatible with Datavideo ITC intercom systems using the Datavideo 4 pin XLR adapter??

A: The Datavideo CB-8M cable adapter can be used with headsets that feature a 4pin Female XLR wired for Telex. This includes the Eartec ProLine with the same connector (Clear-Com /Telex)

Q: 9. Could this be a solution if we want to capture a voice with it and send it via a radio transmitter? By using for example two DAD6034 and a Y adapter cable (mini-jack splitter) to connect everything to the wireless transmitter? If the transmitter only supports one input, we will lose stereophony, but this is not essential in our case. We want to use them instead of a lav mic (camouflage+no rustle).

A: The DPA Microphones 4560 CORE Binaural Microphone is not a good choice for a mic to use with a wireless transmitter since it has two separate output connectors and requires 5 to 10V. A wireless microphone transmitter like one from Sennheiser accepts only one input and sends a mono audio signal to the receiver. What you could do is connect the mic to separate channels on a mixer and then send the left and right audio from the mixer wirelessly to two receivers to maintain the stereophony.

Q: 10. Is the 3.5mm locking connector compatible with the Sennheiser body packs?

A: Yes, the DPA Microphones Core 4066 Omnidirectional Headset Microphone with 1/8" Mini Jack Connector is compatible with all Sennheiser wireless transmitters that use a 3.5mm locking input connector.