The Azden SGM-250CX Shotgun Microphone with Shockmountis a short shotgun microphone that features a shockmount for easy camera mounting and a hardwired 13" output cable with a standard XLR connector for use with professional cameras and recorders. It is powered via phantom power. Specifically tuned to preserve the natural qualities of a speaking subject, the mic provides video creators with a cost-effective solution for indie films, web shows, and wedding applications.

The SGM-250CX features a supercardioid polar pattern and a custom-designed acoustic tube with high-precision, phase-canceling slots that minimize the recording of extraneous noise while focusing on the sound in front of the camera. The highly sensitive capsule delivers a flat frequency response (20 Hz to 20 kHz) with low self-noise and 130 dB SPL, for accurate audio capture.

Handcrafted in Japan, the SGM-250CX is housed in a brass/aluminum alloy case that improves durability and rejects ambient radio frequencies (RF). The SMH-X shockmount with two diameter expander sheets provides a secure hold for your mic, whether you run-and-gun or mount it to a pistol grip or to a boompole.

For Indie Films, Web Shows & Weddings    Phantom Power Only    Shockmount for Camera Mounting    XLR Output with Hardwired 13" Cable

• Short length and compact design ideal for mounting on professional cameras equipped with an XLR audio input
• Supercardioid polar pattern with narrow pickup —provides enhanced directionality for isolating dialog from ambient noise
• Electret condenser microphone element delivers high sensitivity and low self-noise for clear recording of quiet sounds
• Powered by standard 48 VDC phantom power
• Wide dynamic range allows for capturing sounds at up to 112 dB without distortion
• Gold-plated, 3-pin XLR output connector with 13" hardwired cable extension
• Includes SMH-X shockmount—compatible with standard-size camera shoe slots as well as 1/4"-20 threaded boompoles and tripods
• Includes foam windscreen and carry pouch
• Handcrafted in Japan

SGM-250

• For use with either a DSLR/mirrorless camera (XLR to 3.5mm adapter cable required) or with a professional camera or recorder with an XLR input (XLR cable required)
• Powered via one AA battery or phantom power

SGM-250P

• For use with professional cameras and recorders equipped with an XLR input that supplies phantom power
• Powered via phantom power only

SGM-250MX

• For use connected to the mini-XLR mic input of Blackmagic Pocket Cinema cameras
• Powered via phantom power only
• Comes equipped with a shockmount for camera mounting and a hardwired 13" output cable with a mini-XLR connector

Related Questions and Answers

Q: 1. shoud i buy the shockmount seperately or it will be provided in the 199 dollar pack ?

A: The Azden SGM-250MX Shotgun Microphone comes with Azden's SMH-X Universal Shockmount for Camera Shoes and Boompoles.

Q: 2. Is it possible to use the SGM-250CX with a GH4? Or is there any way to get high quality sound with the GH4 (other than using a separate audio recorder)? Thank you for help.

A: Hello. The SGM-250CX can only work with the GH4 if you're using some sort of small audio mixer/XLR adapter. Currently, Panasonic makes a small XLR adapter box that mounts to the hot shoe, but that is only compatible with the GH5. If you're using the GH4, it will only work using something like our FMX-DSLR 2-channel audio mixer, or something like a Zoom or Tascam product.

Q: 3. Will this mount onto the tilta cage for the bmpcc 4k?

A: This shotgun mic will mount into the shoe on the top of the Tilta Camera Cage for Blackmagic Design Pocket Cinema Camera 4K/6K (Basic Kit, Tilta Gray), BH #TITAT01BG.

Q: 4. Will this work on a canon XA11?

A: Yes, this Azden SGM-250CX Short Shotgun Microphone will be compatible with the Canon XA11.

Q: 5. How does the Azden 3500 do outside in high temps and humidity?

A: The Azden SGM-3500 Broadcast Shotgun Microphone is not IP-rated for water resistance, and Azden has not published specs on its maximum operational temperature. As such, it should be treated with care and kept away from moisture and extreme temperatures.

Q: 6. HOW TO INSTALL THIS MIC ON bmpcc 4k, should I buy anything additional?

A: Install on bmpcc a cold shoe B&H # SM1241 or PEAMF1420 to mount mic. This mic has a Mini XLR provided: Azden SGM-250MX Mini-XLR Short Shotgun Microphone for Blackmagic Pocket Cinema (Shockmount, Phantom Only) and the bmpcc has a mini xlr connection: Audio Connectors 1 x Mini XLR Mic/Line Level (+48 V Phantom Power) Input 1 x 1/8" / 3.5 mm Stereo Mic/Line Level Input 1 x 1/8" / 3.5 mm Stereo Headphone Output

Q: 7. Does this come with the pictured shock mount?

A: yes it does.

Q: 8. Is the hardwired mini xlr cable long enough to mount this on the top handle of the blackmagic 4k/6k Tilta cage?

A: We have not tried the microphone with the Tilta cage specifically. But based on our testing with similar cages, the SGM-250MX's cable does have plenty of length to reach the camera's mic input when mounted to the top handle. For reference, the SGM-250MX's cable is 13 inches long.

Q: 9. I just bought it, no idea how to mount it on BMPCC 4K, HELP ME PLEASE?

A: You're going to need some type of camera cage for your BMPCC 4K with a cold shoe mount. I've been using this mic for my 6K with a full Tilta cage, but there are other, cheaper options out there.

Q: 10. Will this mic comfortably fit in the Sony audio top handle for the FX3/FX30?

A: Yes, the Azden SGM-250CX Short Shotgun Microphone will fit in the mic holder on the Sony XLR-H1 XLR Handle Unit for the Sony FX3 Full-Frame Cinema Camera.