Grow your rig with the ARRI 15mm Rod Clamp Adapter for Wooden Camerafrom Wooden Camera. Using the included screws, this accessory attaches to a 1/4"-20 or 3/8"-16 ARRI accessory mount, ensuring a solid, twist-free connection. It provides a 15mm single-rod clamp with a tightening knob for mounting a compatible accessory such as a top- or side-mounting lens motor with a 15mm rod.

Mounts on 1/4"-20 or 3/8"-16 ARRI Mount    Anti-Twist Connection    Provides Single 15mm Rod Clamp    Tightening Knob

Related Questions and Answers

Q: 1. Does this provide LWS standard measurements to all Smallrig camera cages?

A: The SmallRig Universal Camera Baseplate with 15mm LWS Rod Clamp is not necessarily designed for cage use only but can be used on such. The baseplate offers a LWS rod clamp.

Q: 2. Is the M6 thread in the center, the same as a 1/4"-20 thread?

A: No it is not.

Q: 3. can this fit the Sony a7s3?

A: Yes the SmallRig Universal Camera Baseplate with 15mm LWS Rod Clamp could directly attach the Sony FX3. However, normally the baseplate connects to a Smallrig cage. We have included a cage and a baseplate below. I have also included a full Tilta cage with Baseplate solution. SmallRig Camera Cage for Sony FX30 and FX3 BH #SM4183 SmallRig Tripod Mounting Kit with 2 x Plates and 2 x 15mm Rod Clamps BH #SM1798 Tilta Camera Cage Basic Kit v2 for Sony FX3 & FX30 (Black) BH #TIAT16AB

Q: 4. Will this work with small rig c70 cage?

A: The SmallRig Universal Camera Baseplate with 15mm LWS Rod Clamp will work with the SmallRig Handheld Cage Kit for Canon EOS C70.

Q: 5. Is it possible to change to orientation of the locating pins?

A: Hi Mark. You can take a small flat head screwdriver, remove the pins and move them to another threaded hole.

Q: 6. Does the M4 screw fit into the 1/4-20 screw holes?

A: An M4 Screw and a 1/4"-20 threading are not compatible.

Q: 7. How many locating pin holes are there?

A: The Wooden Camera ARRI Accessory Mount to 15mm Rod Clamp Adapter has 4 threaded holes that you can screw ARRI locating pins into on the bottom.

Q: 8. Does this come with a 1/4-20 bolt? It says it "Requires 3/8"-16 or 1/4"-20 Bolt". But I specifically need the latter.

A: 1/4"-20 and 3/8"-16 bolts are not included with the Kondor Blue ARRI-Style 3/8"-16 Pin to 15mm Rod Clamp (Raven Black), however if you have a 1/4"-20 bolt to use with the clamp it will support the 1/4"-20 bolt as a mounting method. The bold will go through the clamp and come out the end with the anti-twist pins. Then a 15mm rod would enter the open end on the opposite side where it would then be clamped into place.

Q: 9. Does this come with a thumbscrew?

A: Yes, the Falcam 15mm Rod Clamp with ARRI Anti-Twist comes with thumbscrew.

Q: 10. The screw through the middle to which the knob attaches, what size / standard is it?

A: The CAMVATE 15mm LWS Rod Clamp with ARRI-Style Rosettes's tightening knob is mounted to a 20mm M5 screw.