The Magewell Eco Capture HDMI 4K M.2 Cardallows you to connect an HDMI source to your computer and capture up to DCI 4K 4096 x 2160 resolution with embedded audio. Featuring an M.2 (PCIe 2.0) computer interface, this card provides the flexibility to be used in compact/thin tablet computers and other small form factor PCs where PCIe slots may be at a minimum. It's compatible with Windows and Linux operating systems and is capable of operating 24 hours a day, 7 days a week while an LED indicator confirms the working state of the input the entire time (idle, input signal locked, memory failed, or FPGA configuration).

The Eco Capture HDMI 4K M.2 Card also offers many processing and other features, including resolution scaling and a high-fidelity pipeline. The card has a native JST SHD input connector and comes with a matching SHD to HDMI type A adapter cable for connecting your HDMI signal.

Capture DCI 4K into PC/Linux Computers    Small Form Factor M.2/PCIe 2.0 Interface    Capable of 24/7 Operation    JST SHD Connector / SHD-to-HDMI Cable    Resolution Scaling, Time Stamp    High-Fidelity Processing Pipeline    Various Output Color Spaces & More    LED Status Indicator

• JST SHD connector supporting included SHD to HDMI adapter cable

• Capture 4096 x 2160 DCI 4K resolution

• M.2 Interface (PCIe 2.0)

• Compatible with Windows and Linux

• Resolution scaling

• High-fidelity video processing pipeline

• Image control

• Various output color spaces

• SG-DMA transmission mode

• Multiple devices on one host

• Multiple replicated capture streams

• Hardware time stamp

• Mounting hole

• LED indicator

• Firmware upgradeable

• Common driver

• 24/7 continuous operation

• 297 MHz HDMI receiver

• Adaptive HDMI equalizer

• Customized EDID

• Extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames

• Full colorimetry

• RGB/YUV 4:4:4 8-bit and YUV 4:2:2 12-bit format signals with a pixel frequency of no more than 297 MHz

• RGB/YUV 4:4:4 10/12-bit format signals with a pixel frequency of no more than 170 MHz

• Up to 8-channel IEC60958/IEC61937 audio streams

• Extraction of audio formation information and channel status data

• Extraction of video timing information

• Extraction of 3D format information

• Extraction of Sony/Canon DSLR timecode

• Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode

• Image resolutions up to 4096 x 2160

• Frame rates up to 144 fps (actual capture frame rate can be limited by PCIe bandwidth and image resolution)

• 4:2:0 8-bit capture formats: NV12, I420, YV12

• 4:2:2 8-bit capture formats: YUY2, YUYV, UYVY

• 4:4:4 8-bit capture formats: V308, IYU2, V408, BGR24, BGR32

• More capture formats are supported via Magewell Capture SDK for DirectKS

• Video processing pipelines with 360 megapixels processing bandwidth

• 8-bit 4:4:4 video processing

• Cropping

• Scaling

• Deinterlacing

• Video aspect ratio conversion

• Color format conversion

• Auto or manual selection of input color format and quantization range

• Auto or manual selection of capture color format, quantization range and saturation range

• RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats

• Limited or full quantization range

• Limited, full, and extended gamut saturation range

• Frame rate conversion

• Weave

• Blend top and bottom field

• Top field only

• Bottom field only

• Auto or manual selection of input aspect ratio

• Auto or manual selection of capture aspect ratio

• Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping, or Padding (Letterbox or Pillarbox)

• Auto or manual selection of input color format and quantization range

• Auto or manual selection of capture color format, quantization range, and saturation range

• Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats

• Support for limited or full quantization range

• Support for limited, full, and extended gamut saturation range

• Support for multiple cards plugged to one system

• On-board rotary switch to set card number with 16 positions

• System hardware device tree will display "01: Eco Capture HDMI 4K M.2" when rotary switch is set to 0001, and so on

• The video and audio device names displayed in your software will include the card number (set by the rotary switch)

• Unlimited capture streams for any one input channel (but in the same format)

• Hardware based 100ns high resolution clock

• Audio frames (192 audio samples) and video frames are stamped with hardware clock

• Hardware clock can be synchronized across cards (via SDK)

• 1200 MB/s per channel DMA bandwidth in PCIe 2.x system

• 800 MB/s per channel DMA bandwidth in PCIe 1.x system

• Auto detection of Intel tiled GPU surface

• DirectGMA for AMD video adapter chipsets

• GPUDirect for NVIDIA video adapter chipsets

• Magewell Capture SDK for DirectShow for easy integration (Windows)

• Magewell Capture SDK for DirectKS for maximum flexibility and performance (Windows)

• All options can be controlled by three levels of registry key: global level, product level, and device level

• Video, audio, crossbar filter names can be customized via registry keys

Related Questions and Answers

Q: 1. Will this file in 10th Gen Intel® Core™ i7-10700 processor with the Nvidia RTX 2060?

A: This internal capture card should work well in a PC with an available PCI-e slot and with this processor and graphics card.

Q: 2. Will this be able to fit under a graphics card?

A: no there may be some issues mounting this under a graphics card as the device is rather tall, while it may fit under a single card it will mot fit under a dual card

Q: 3. does it capture 4K @ 60 or just 4K @ 30??

A: The Magewell Pro Capture HDMI 4K Capture Card (1-Channel) is a 4k@30hz capture card. For 4k@60hz please use the following card. Magewell Pro Capture HDMI 4K Plus Loop-Through Capture Card BH #MA11152 • MFR #11152

Q: 4. The USB cable included with this device is very short. What type A to type C cables are compatible with this device. Up until now the only cable I can find that will allow the card to be recognized by my 2019 MacBook Pro is the cable that was included with the card. Even though other cards seem to match the required specifications the device does not power on and is not recognized by the computer.

A: I am sorry to say that Magewell advises to please use the included Magewell USB 3.0 cable, which is a custom accessory. Using any other similar cable might cause capture problems and even damage the capture device.

Q: 5. Is this card compatible with Mac OS 12 Monterey?

A: Yes. The system will adapt to Mac, ARM (M1 systems)

Q: 6. is this hardware or software compression?

A: The Magewell Eco Capture is supposed to be used for capturing raw video/audio data without compression.

Q: 7. How do you cable manage the input cable/s? Is there a breakout interface or something to harness the SDI or HDMI cable that have to connect externally?

A: The needed adapters are included. The SDI model of this Capture Card includes two MMCX to BNC Adapter Cables. While the Dual HDMI Mode, B&H # MA11510, will come with a pair of JST SHD to HDMI Type A Adapter Cables.

Q: 8. Are the HDMI and DB9 Ports labeled in any way? If so, what do the labels say?

A: The HDMI and DB-9 ports are not labeled. The HDMI port is the smaller of the two.

Q: 9. Is it compatible with the 2019 Mac Pro?

A: this is a PCIE expansion card and will work on any computer that supports PCIE expansion cards as long as the computer has slots available.

Q: 10. if audio from mic input and color correction is added in computer will it come through loop through hdmi out on device?

A: The loop through does not take in to account anything that is added within the computer. It is just a loop out of the HDMI input.