The Sirui A1005 Aluminum Tripod Y-10 Ball Headfrom Sirui A1005 Aluminum Tripod Y-10 Ball Headis a 5-section tripod that weighs 2.7 lb. The aluminum legs fold a full 180° in reverse to make it a compact 14". With the center column fully extended, the tripod can reach a maximum working height of 55.1". Additionally, with a load capacity of 22 lb, this tripod is suitable for a pro DSLR with a large telephoto lens.

The hook at the bottom of the center column enables you to hang a small sandbag or camera bag to stabilize the tripod. Plus, variable leg-angles allow the tripod to have a minimum height of 10.2", and the center column is also reversible to let you get even closer to the ground. Sometimes a tripod is not allowed in certain areas because space is limited. That is when a useful feature comes into play–the tripod's leg detaches and converts into a monopod. You can increase the height of this monopod by attaching the center column to it.

The included Y-10 Ball Head is Arca-type compatible and comes equipped with a quick release plate. It also has a knob-style lock for the clamp, and two separate knobs control the movement of the ball and 360° panning base. In addition, with the ball head's single-cut notch, the camera can be placed in a 90° angle.

Load Capacity: 22 lb    Maximum Height: 55.1"    Minimum Height: 10.2"    Folded Length: 14"    Leg Sections: 5    Weight: 2.7 lb    Aluminum Legs    180° Reverse-Folding Legs    Detachable Monopod Leg    Y-10 Ball Head

The 2.7 lb tripod has a maximum height of 55.1", a minimum height of 10.2", and a load capacity of 22 lb

The aluminum legs have 5-sections and the legs fold in reverse to a compact 14"

Weight and stability can be increased on the support by adding a small sand bag or camera bag to the hook located at the bottom of the center column

The tripod's detachable leg converts into a monopod and the height is increase when the leg is attached to the center column

The Y-10 Ball Head has separate knobs for the pan and tilt, and a single cut notch for a 90° angle position of the camera

Related Questions and Answers

Q: 1. Does it have a level? How many?

A: Yes, there is one spirit level on the ballhead.

Q: 2. How tall can the Sirius A1005 tripod w y-10 ball head without the center post extended?

A: It is 42.7" maximum height without center post extended.

Q: 3. Will Manfrotto XPRO 3-Way Gear head fit on this leg?

A: Yes.

Q: 4. Is the QR plate an Arca Swiss type?

A: Yes.

Q: 5. Does the TY-50E Quick Release Plate have a 1/4 X 20 threaded hole to facilitate attachment of my hand strap to the plate, when the plate is attached to the camera?

A: The Sirui TY-LP40 and TY-LP70 plates have a threaded 1/4 x 20 hole to attach your hand strap. The TY-50E has a slot that you can put a strap through

Q: 6. What does it weigh?

A: 2.58kg (5.69lb)= everything in he bag + bag itself1.99kg (4.39lb) = tripod + E-20 ball headMeasured on a baking scale.

Q: 7. Does this kit indeed come with the K-10 II ball head? I'm seeing it packaged with the E-10 ball head elsewhere online

A: The Sirui T-1005 Aluminum Travel Tripod with K-10 II Ball Head includes the Sirui K-10II Ball Head, BH #SIK10II.

Q: 8. Is 57 the maximum height with the center column extended?

A: Yes it is at least 57 I measure 59 with center column extended and legs set for normal use. SFK

Q: 9. What have been your experiences with this tripod? Have you found that the legs collapse easily? Must you be extra careful tightening the legs?. The column that goes up and down, must you also be vigilant that it too has been tightened "hard"? And, finally, the ballhead itself, can it hold without sagging ( or tipping over) a NIKON D90 or D7000 or D610 with battery grips and a 300MM lens?

A: The A1005Y is an excellent combination of streanth & portability. It has a 22 pound load capacity, well within your system requirements. The Sirui twist lock system only requires 1/2 turn to loosen or tighten. When loosened the legs move smoothly. When tightened they are solid. The Y-10 head is very solid. No Sirui products require excessive force to function properly.

Q: 10. Can the feet be removed and replaced?

A: No, on the Sirui model ET-1004, the rubber feet are fixed and non-interchangeable/removeable.