The Marantz PMD-750T Beltpack Transmitter with Lav Mic 2.4GHzis a bodypack transmitter with an omnidirectional lavalier microphone that can be used as a second transmitter to expand the PMD-750 wireless camera-mount system to two-channel operation, for transmitting stereo signals or two mono signals and capture speech for two people, in interview or acting situations.

The PMD-750T operates in the 2.4 GHz frequency range with frequency-hopping technology, as well as automatic pairing and channel selection. It is equipped with a locking 4-pin mini-XLR jack to ensure that the lavalier mic remains securely connected. The unit is powered with two AA batteries and features a simple-to-operate interface with an OLED display that is easily readable outdoor in sunlight.

The PMD-750T ships with foam and synthetic-fur windscreens to protect the lavalier mic from unwanted wind noise.

For PMD-750 Wireless Camera Mount System    Omnidirectional Lavalier Mic    Automatic Pairing and Channel Selection    2.4 GHz FHSS Frequency-Hopping Operation    Easily-Readable OLED Screen    Locking 4-Pin Mini-XLR Input    Lightweight at 2.8 oz    Powered via Two AA Batteries    Foam and Fur Windscreens

• Expands the PMD-750 wireless camera-mount system to two-channel operation
• Includes omnidirectional lavalier microphone
• 2.4 GHz FHSS (frequency-hopping spread spectrum) operation
• Automatic pairing and channel selection
• Easily-readable OLED screen
• Lightweight at 2.9 oz
• Locking 4-pin mini-XLR mic input
• Powered via two AA batteries
• Includes foam and synthetic-fur windscreens

Related Questions and Answers

Q: 1. Would this work using the sub1/2 output from my zoom f8 into the transmitter? I want to create a portable headphone feed from my mixer

A: Yes, it would. The sub1/2 output is a consumer line level output, which is identical to a headphone jack. The SilentPA transmitter has a 1/8 TRS input on the side of it, and you can plug the output into it. It is however, VERY hot and you'll have to have the volume knob on the transmitter all the way down. I set the sub 1/2 output to mic level to make it easier.

Q: 2. Are these compatible with ClearCom?

A: This beltpack is made specifically for the PortaCom system. so it would not be compatible with ClearCom equipment.

Q: 3. Hi guys, I would like to know if these transmitters came with the Lectrosonics SMDWBBCSL Spring-Loaded Metal Belt Clip Kit (Antenna Up or Down) or I have to buy them separated. Thanks for the support

A: Please call customer service at 800-821-1121

Q: 4. What is the expected runtime for the SMDWB on Eneloop Pro 2450s and Energizer Lithium (the data sheet only shows Alkaline, which seems possibly incorrect)?

A: The battery run time for the Lectrosonics SMDWB with AA lithium, disposable batteries is. At 50 mW (2 x AA): 14.5 hours and at 100 mW (2 x AA): 14 hours.

Q: 5. Will this work with a Rode wireless GO II receiver?

A: The Sennheiser XS Lav Mobile Lapel Mic (TRRS Connection) is intended for use with smartphones so it is not compatible with the input on the transmitter if used by itself, but you can use it together with the Rode SC3 3.5mm TRRS Female to 3.5mm Right-Angle TRS Male Adapter Cable (B&H # ROSC3) to convert the mic's 3.5mm plug from TRRS to TRS which will enable compatibility with the 3.5mm TRS mic input on the Rode Wireless GO II Transmitter. The 3.5mm TRRS connector on the XS Lav is a universal connector used for mobile devices.

Q: 6. Would this work using the sub1/2 output from a zoom f8 recorder into this reciever? I want to create a portable headphone feed from my mixer

A: This system would be a good choice to create a wireless headphone feed for the Zoom F8 recorder.

Q: 7. Is the blue cable included? This set contains set BH#SEWXSPLSTR?

A: Yes, the Sennheiser XSW-D Portable Lav Mobile Kit with Transmitter, Receiver, Lapel Mic, Mounts & Manfrotto PIXI Tabletop Stand does include the blue cable. There are two cables included with this kit. One is a locking 3.5mm TRS to 3.5mm TRS coiled cable, and the other is a locking 3.5mm TRS to 3,5mm TRRS coiled cable.

Q: 8. Can the blue TRS to TRRS cable be purchased separately?

A: Here is a link to the standalone product page for that cable. https://www.bhphotovideo.com/c/product/1629643-REG/sennheiser_508908_cl_35_trrs_locking.html

Q: 9. Can it be used for Zoom calls on Android device with wired headphones connected via mini jack?

A: No. It has USB C connector: Sennheiser XS Lav USB-C Lapel Mic (Computers & Mobile Devices with USB-C Ports)

Q: 10. Do these work with the stock DR-10L lavalier?

A: No, the Auray Lav Mic Tie Clips for the Sony ECM-77 will not work for the Tascam TM-10L lavalier microphone included with the DR-10L recorder. This clip is specifically for the ECM-77 which is a different size. For the TM-10L, you can use the Auray Tie Clip for Pearstone OLM2, Senal OLM2, Sennheiser ME2, and Sony UWP-V Lavalier Mics - Pack of 5 (B&H # AUTCOLM25) which is the same type of clip in a compatible size for the TM-10L.