The Dotworkz D3 COOLDOME Camera Enclosure with Heater Blowerfrom Dotworkz offers outdoor protection for analog and network-based security camera systems. It can fit a multi-sensor 360 or 180° PTZ, dome, or mini-dome camera, as well as an NVR, router, or other hardware inside. The IP66-rated housing is durable, impact-resistant, and weatherproof, made from thermal plastic polycarbonate. With thermostatically controlled active cooling, it provides heat protection in temperatures as high as 167°F with up to a 45° of temperature differential between the inside and outside of the housing. The enclosure also features a dual heater/blower for protection against temperatures from -25 to 122°F.

IP and Analog Camera Compatible    Polycarbonate Thermal Plastic    Thermostatically Controlled Cooling    Heater/Blower for Temperature Control    Onboard Component Mounting Space    Vari-Fit Internal Bracket Included    IP66-Rated Enclosure and Ports

IP and analog camera compatible

Vari-Fit internal bracket included for good fit

Thermostatically controlled active cooling for use in temperatures as high as 167°F

Heater/blower for protection against temperatures from -25 to 122°F

IP66-rated against dust and salt water

IP68 waterproof connection ports

Onboard component mounting space for: routers, cellular transmitters, hard drives, UPS, WiMAX, and mesh hardware

Onboard antenna mounting tab

Heavy-duty lower lens

Related Questions and Answers

Q: 1. Will this model work with a AW-HE40HW PTZ Panasonic camera for Live Streaming Broadcast to protect camera from room dust, physical damage, etc.? To be located on back wall, 12ft off basketball gym floor and 90 ft away from subjects on a stage for P&W services on Sunday mornings. Basketball court is used 3-5 days/week by Boys & Girls club, Upward Basketball league, youth & children’s sports, etc. Dennis

A: Per Dotworkz: The Dotworkz D2 Base Model Camera Enclosure IP68 (D2-BASE) is compatible with all PTZ, Dome, Mini Dome, 360°, 180°, and Multi Sensor Camera Brands. The Dotworkz D2 Base Model Camera Enclosure IP68 (D2-BASE) fits a security camera, NVR, router, and environment specific hardware inside the durable, impact resistant, and weatherproof protective thermal plastic polycarbonate housing. Highlighted Features: IP and analog camera compatible Vari-Fit internal bracket included for perfect fit Impact Resistant Polycarbonate Thermal Plastic IP68 rated against dust, water, and salt water air. IP68 (water proof) connection ports Environmental options for virtually all applications Heavy-duty lower lens for impact resistance

Q: 2. Is the enclosure compatible with Panasonic WV-S6130?

A: Dotworks claims that their enclosure is compatible with all ptz cameras.

Q: 3. Can it hold a canon rebel t8i camera?

A: The interior form factor is designed for use with surveillance cameras. The Canon EOS Rebel T8i will not functionally fit inside this enclosure.

Q: 4. Is this the same as the Dotworkz PTZO-BASE enclosure that is listed on their site as compatible with a PTZOptics PT30X-SDI?

A: Yes, the Dotworkz D2-BASE will be compatible with the PTZOptics PT30X-SDI.

Q: 5. What is the maximum internal camera size? Looking for an enclosure for a camera 5" by 5" by 12" long

A: The Dotworkz S-Type Solar Tornado Dual Blower Camera Enclosure with Stainless Steel Arm (B&H # DOSTTRSOLARS) features usable interior dimensions of 13.0 x 3.75 x 5.0” (L x H x W).

Q: 6. Is this compatible with PTZ PT20X-4K-G3?

A: TheDotworkz D2 Base Model Camera Enclosure with Extended Size External Lens (BH #DOD2BASEEXT) will work with the PTZOptics Move 4K SDI/HDMI/USB/IP PTZ Camera with 20x Optical Zoom (B&H # PT20X4KGYG3).

Q: 7. Does this fit the BirdDog P200?

A: Yes, the camera should work with the D2-Base.

Q: 8. Would this work with Canon CR-N500?

A: The Dotworkz D2 Base Model Camera Enclosure with Clear Lens BH #DOD2BASE is not designed to work with PTZ conference cameras. It is designed specifically for surveillance type cameras.

Q: 9. Which mount do i need to choose on this site to mount the housing on a pole ?

A: Looks like you would use the B&H# PEEM1109

Q: 10. Can I use this for Sony BRC-H900?

A: Yes, the SONY BRC-H900 would be supported when using the Dotworkz HD12 COOLDOME Active Cooling Camera Enclosure for Broadcast Cameras with Heater Blower. Dotworkz also offers a custom housing for the SONY BRC-H900 as well. Sony Environmental Dome Enclosure for BRC-X1000-BRC-H900/BRC-H800 PTZ Cameras BH #SOBRZ12CDH • MFR #BRZ-12CDH