For a portable power source for your speedlights, use the Quantum Instruments Turbo 3 Rechargeable Battery UK Plugfrom Quantum Instruments. This battery works with most shoe-mount and handle-mount flashes, including all Quantum Qflash, T-series, and Trio/Pilot portable flashes. The Turbo 3 has the capacity to provide 1050 full-power flashes for shoe-mount speedlights and 750 flashes for handle-mount units.

The product offers two outlets so you can simultaneously power a digital camera and a flash, or two flashes. Cables are secured to the battery via locking sockets so you don't have to worry about a cable falling out while you are in the middle of shooting. Compatible cables for Nikon, Canon, and Qflash Trio are available and sold separately.

The Turbo 3 is equipped with four LED status indicators for checking how much power you have left. Recycling times vary from 1 to 1.9 seconds, and it takes about three hours to fully charge the unit with the included battery charger. The product weighs only 2 lb and can be carried around easily with the included belt clip.

For Most Shoe- and Handle-Mount Flashes    Up to 1050 Full-Power Flashes    Recycling Time as Low as 1 Second    Dual Power Outlets with Locking Sockets    Battery Status LED Indicators    Lightweight (2 lb)    Charger and Belt Clip Included    Recharge Time: 3 Hours    Rechargeable NiMH

• NiMH batteries used for quick recycling
• Non-included locking flash cables for Nikon, Canon, and Qflash TRIO can be secured with the locking sockets of the Turbo 3
• Comes with a belt clip, and has fittings for an optional shoulder strap
• Two outlets for simultaneously powering a digital camera and a flash, or two flashes
• The internal battery can be replaced by Quantum Instruments at a nominal cost if desired
• To check the Turbo 3 capacity when it is not connected, press the ON button until the LED display comes on. The gauge will automatically turn off after use

• Shoe mount: 1050
• Handle mount: 750
• Qflash: 600
• Trio: 1050

• Shoe mount: 600
• Handle mount: 450
• Qflash: 375
• Trio: 630

• Shoe mount: 7500
• Handle mount: 5400
• Qflash: 4300
• Trio: 7500

Related Questions and Answers

Q: 1. Do I need AA batteries in the flash? while using Turbo3?

A: Yes.For your Information: if you are firing faster than the recycle time of the Turbo 3, it will use your internal batteries until exhaustion and then your flash is unusable due to the lack of internal power. (Despite C-FN-12 of your Flash is set to 1).

Q: 2. Does it work with the Nikon d300 and the speed light sb800? And which cable is necessary?

A: It works great with the speed light

Q: 3. Is charging adapter included ? What is the specs of the adapta ?

A: The charger has a U.S type plug on it but it slides in so maybe you can get a different slide in for other countries.I am using it in europe so use an standard adapter for each different country.The charger works on 115v/240v

Q: 4. Does this work for continuous lighting?

A: I have not tried it with continuous lighting, but it works great with all my Nikon Flashlights BRB

Q: 5. Will this work with the Yongnuo flash units? Which Cable to use?

A: I am not familiar with that flash. Contact Quantum Instruments. 630 - 233 1545 or 630 - 246 5002

Q: 6. Can it work with Sony Flash HVLF60RM? TY

A: Yes, this flash utilized the Quantum CL5 cable. But that has been discontinued, however Bolt makes a cable for the 60 flash, click the link below to view; https://www.bhphotovideo.com/c/product/1047065-REG/bolt_bo_1012_flash_cable_for_sony.html

Q: 7. I read in the few forums that it does not work well with Canon 600 ex-rt II as compare to older model 600 ex-rt, apparently can made some changes and the best bet is their own new battery back please answered you experience on both above mentioned canon flash lights. Thanks! Muhammad

A: It works perfectly fine with both 600ex/ex2 Speedlight's , you will need the proper cable Quantum Instruments CZ2 Power Cable for Turbo Series Power Packs BH #QUCZ2

Q: 8. Will the CKE2 cable work for the speed light SB5000?

A: I only use the Turbo 3 with my Quantum flashes but I do have a Nikon SB5000. I feel that the Quantum is much more powerful and like the filtered light.

Q: 9. Will this work to power a Metz 45 ct3? If not is there another battery for that flash?

A: The Quantum Turbo 3 can power a Metz 45 CT3 using the Quantum Instruments CCM4 Short (1.5') Dedicated Module (Connection Cable) - for Turbo Series Battery with Metz 45CL-1, 45CL-3, 45CL-4, 45CT-3 & 45CT-4 Flash B&H # QUCCM4.

Q: 10. what cable do I need for a nissin i60a flash?

A: The Quantum CZ2 cable will work. Please click the link below to view; https://bhpho.to/2yro44D