You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Hawk-woods Spg-28a Dual Battery Adapter 28v Gold Mount

Hawk-woods Spg-28a Dual Battery Adapter 28v Gold Mount
  • Product Code: eq46857
  • Availability: In Stock

$1,041.60 $1,614.48

The 28V Hawk-Woods SPG-28A Dual Battery Adapter 28V Gold Mountfrom Hawk-Woods SPG-28A Dual Battery Adapter 28V Gold Mountis a clever accessory that avoids scenarios in which a battery is dangling from a light fixture. The adapter features two Gold mount battery plates that provide power to your gear via a 3-pin XLR output. It mounts to a 5/8" light stand stud and has a 5/8" spigot for the light fixture, saving space and making the power source readily available to check its charge level or swap it out for a fully charged battery.

Accepts Gold Mount Batteries    Attaches to 5/8" Light Stand Studs    Makes Power Supply Part of the Mount    3-Pin XLR

Parameters
Battery TypeGold Mount
Power28 V
Output3-Pin XLR Output
Mount5/8" / 16 mm Receiver and Spigot
Packaging Info
Package Weight1.2 lb
Box Dimensions (LxWxH)6 x 6 x 2"

Attaches to 5/8" light stands
Gold mount batteries allow up to 12A combined draw
3-pin XLR output

Related Questions and Answers

Q: 1. Hello, Does it work with the FS7 Mark II?

A: The Hawk-Woods V-Lok Battery Adapter with 5 x D-Tap Ports for Sony FS7 (V-Mount) is compatible with the Sony PXW-FS7II.

Q: 2. Is this made of metal or plastic?

A: The Hawk-Woods SD-2 Sound Devices MDV Battery Adapter is made mostly out of a sturdy hard plastic with a few metal pieces such as the contacts and screws.

Q: 3. How reliable is the company or at least the battery, I can't find too much about them on google and I'm a little afraid that this battery will be as good as 30usd knock off

A: Hawk-Woods is a very reputable battery brand.

Q: 4. Will this work with an Fx6?

A: The Hawk-Woods Sony FX9 Battery Plate with D-Tap & USB Out (Gold Mount) combined with the Sony FX6, does have the same power requirements with the FX9. This has only been tested with the FX9, so we can only speak for how it was made to operate.

Q: 5. Can I use my old Sony pd 150or my Panasonic af 100 batteries with this adaptor?

A: We're afraid not, this part is for BP-U style batteries. For Sony L or NP-F Style Batteries we suggest the IndiPRO Tools Sony L-Series Battery Adapter Plate for Blackmagic Pocket 4K Camera (10") instead, B&H # INSLPBP4K. This will work with the batteries that the PD-150 uses. https://bhpho.to/2J5Gb9B

Q: 6. What wattage of Lights can this power?

A: The maximum wattage output of the Hawk-Woods V-Lok 4-Way 48V Converter (V-Mount) is 500w.

Q: 7. Do these work with Atomos Ninja Inferno or just the shogun inferno?

A: You can use this product on either the Ninja or Shogun model.

Q: 8. Does this work with the FX6 charger?

A: The Hawk-Woods BP-60U 60Wh 14.4V Lithium-Ion Battery is a BP-U series battery and is compatible with the Sony FX6 and its charger.

Q: 9. Does this fit flush in the FX6 or does it stick out?

A: The Sony BPU-30 battery would sit flush with the back of the FX6. The Hawk-Woods BP-60U 60Wh 14.4V Lithium-Ion Battery would stick out of the battery port about 1 inch.

Q: 10. Since this item is non-cancelable and nonreturnable, have you tested it with the listed cameras to ensure that it works?

A: Yes, the Hawk-Woods Dummy Battery for Canon 5D, 7D and 60D will work with the listed cameras. If it does not work, it would be defective and we would exchange for a working model.

07/09/2024

[1.2 lb] Now I can mount an Anton Bauer battery to my Dracast LED in a snap. Of which I have many. The adapter is easy to attach/detach so I have the flexibility to use V mount batteries with no adapter, or AB Gold mount batteries with the adapter. I fooled around with ordering a cheaper knock off from China. Bad experience. This works perfectly.

5
29/08/2024

[28 V] I have a lot of gold mounts from another camera and used them to attach to this adapter and it worked perfectly on my Komodo. I also like that you can easily tap out from it.

5
18/08/2024

[Gold Mount] Honestly I just got it and I'm positively shocked at what a great idea this type of rigging is and how well it seeems to take weight. I've got Hytron batteries on it which are INCREDIBLY heavy and while I wouldn't recommend doing it too much just knowing it can take it in a pinch is great. Great build quality. A idea, A execution

5
07/08/2024

[6 x 6 x 2"] Adds record start/stop functionality in addition to lens power in conjunction with XDCA-FS7 camera adapter.

5
06/08/2024

[28 V] I use this with a MixPre-3 and a hirose-to-d-tap cable.  Works as expected.  Its awesome to be able to power the MixPre off camera battery.  Would buy again.


Only suggestion I have is that if you do use this to power your MixPre, and if you feed a signal back into your camera (i.e. not just record to the MixPre, but also send a scratch track signal from the MixPre to the camera), then you will want to get a ground loop isolator to put in your signal chain.  Otherwise the in-camera scratch track will have interference noise.  (The internal MixPre recording remains pristine.)

5
26/07/2024

[1.2 lb] I bought 2 of these Anton Bauer brick clips to use with a couple of LED lights. I will modify them slightly to hang off the stands for extra weight in addition to the shot bags I use. I didn't want the brick mounted to the back of the head increasing the chance of the light falling over if bumped. These work great for my purposes.

5
22/07/2024

[1.2 lb] Great way to add power ports to your build without taking up space on your cage.

5
13/07/2024

[Gold Mount] I was looking for a small, low profile power system to power my Sony A7Sii, monitor, follow focus and wireless transmitter. I bought this with the Hawk-Woods 98Wh and 150Wh Mini V-Mount batteries. Since the plate comes with 4 built in D-Tap receptacles I am able to have one small but powerful battery source for everything. The plate also takes my full size V-Mount batteries should I need them in.

5
16/06/2024

[28 V] This is NOT Velcro! Its one strip and it sticks to itself when you press the pieces together. The glue on the back is quite strong. The teeth on the strip are deeper than Velcro.

The material is very stiff, suitable for holding items of moderate weight. If you want to hold light wires together, use something else.

I will probably want more of this.

5
14/06/2024

[1.2 lb] This adapter could be sold by dozens if it was better marketed. It is a fantastic idea for anyone with on set monitors (focus pullers, camera ops, video village) . Worth EVERY penny. Hot swap is the bomb.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Hawk-woods Mini X-boxx 14.4/28v Battery & Charger

$7,812.00 $12,186.72

Hawk-woods V-lok Dual Battery Belt V-mount

$911.40 $1,330.64

Hawk-woods V-lok Mini Battery Belt Dual Fittings

$1,209.00 $1,474.98

Hawk-woods B-lok 26v B-mount Battery 98wh

$1,289.97 $1,586.66

Hawk-woods Xe-83 V-mount Dual Docking Adapter

$911.40 $1,148.36

Products You May Like

Phottix Ph92515 Gear Bag 37.5 Inch Black

$173.85 $219.05

Da-lite 77" Hd Pro Screen With Black Frame

$5,949.00 $7,198.29

Revar Cine 4 X 5.65" Rota Wave Filter

$1,497.00 $2,140.71

Nisi Nano Irnd Filter 100x100mm 6-stop

$480.00 $720.00

Boss Bcb-30x Deluxe Pedal Board Case

$239.97 $323.96

Korg Soft Case For Kross 61 Kross2 61

$404.97 $611.50