This Benro FPA39AB2 ProAngel Aluminum Tripod with B2 Ball Headfrom Benro FPA39AB2 ProAngel Aluminum Tripod with B2 Ball Headsupports up to 26.4 lb and includes a B2 Arca-type ball head with quick release plate. Designed to conserve space during storage and transport, this travel tripod measures 13.4" long when folded. Each of its 5-section legs features an independent spread, a 3-position angle lock, a single half-turn twist lock for speedy deployment, and a rubber foot to enhance stability on a wide variety of surfaces. Among the legs is a push-and-pull, rapid center column with two, telescoping sections and dual twist locks that further contribute to this tripod's compact design. Together, the three legs can be spread and extended to raise the tripod from a minimum height of 13.1" to a maximum height of 52.0" or 63.0" when the center column is fully elevated.

Cameras, lenses, or sport optics that are compatible with a 1/4"-20 mount can be connected to the included quick release plate. The quick release plate can be attached and removed from the integrated, Arca-type clamp located at the top of the B2 head's ball-and-socket joint by tightening or loosening the clamp's knurled, locking knob. This knob must be pulled before it can be turned, which serves to ensure that the clamp is opened only when intended. The top of the quick release plate features a rubberized, non-slip platform, while dual retaining screws are provided along its underside. Those retaining screws help prevent the quick release plate and an attached camera from accidentally sliding off when the clamp it is placed on is opened.

By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Variable tension can be applied to the ball-and-socket joint's movements by rotating the friction knob, which is adjacent to the primary locking knob. Toward the ball head's base is a secondary locking knob that controls the ability to rotate the head 360°. For added versatility, the tripod's center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them.

A nylon carry bag with a zippered closure and shoulder strap is provided for storage and transport.

Compact Travel Tripod with Ball Head    26.4 lb Capacity, Folded Length: 13.4"    Max Height: 63.0", Min Height: 13.1"    Leg Sections: 5, Weight: 4.4 lb    Reversible, Telescoping Rapid Column    Single Twist-Lock Aluminum-Alloy Legs    3/8"-16 Female Accessory Thread    Aluminum-Alloy Ball Head, 90° Tilt    Tension Control, Bubble Level    360° Pan, Arca-Type Compatible Clamp

• Compact travel tripod with ball head
• Supports up to 26.4 lb
• Push-and-pull center column with ballast hook for rapid camera, lens, or sport optic positioning
• Center column has two, telescoping sections with dual twist locks that contribute to this tripod's compact design
• Can be set for a minimum height of 13.1" to a maximum height of 52.0", or 63.0" with center column fully raised
• Center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them
• Legs each feature 5 sections, a 3-position angle lock, a single half-turn twist lock for speedy deployment, and can be independently spread
• Legs can be locked at 24°, 55°, or 80° angles
• For direct attachment of accessories that feature 3/8"-16 mounts, one 3/8"-16 female accessory thread is positioned among the legs' connecting hinges
• Rubber feet help to enhance stability on a wide variety of surfaces
• Ball head's large, primary locking knob with knurled surface allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position
• Friction knob adjacent to primary locking knob applies variable tension to the ball-and-socket joint's movements
• Secondary ball head locking knob with knurled surface allows head to rotate 360°
• Weighs 4.4 lb, measures 13.4" when legs are reversed 180° and folded
• Hex key to adjust tension on leg hinges

• Aluminum-alloy legs
• Aluminum-alloy ball head with Arca-type quick release clamp and built-in bubble level
• Aluminum-alloy quick release plate with 1/4"-20 mount; rubberized, anti-slip surface; and dual retaining screws that prevent the base plate from accidentally sliding off when the clamp it is placed on is opened
• Nylon carry bag with a zippered closure and shoulder strap is provided for storage and transport

Related Questions and Answers

Q: 1. WHAT IS THE DIFFERENCE BETWEEN A 'DOUBLE' ACTION BALL HEAD, AND A 'TRIPLE' ACTION BALL HEAD?

A: This head should actually be listed as a triple action, but the triple action has an extra knob for controlling friction.

Q: 2. Does the quick release plate unscrew from the shaft of the ball head exposing threads so I can attach a different mount?

A: I think you mean the qr clamp and not the plate and yes you can remove the clamp.

Q: 3. Will this tripod support a DSLR camera, Canon 80D to be exact?

A: This tripod can support a DSLR like the Canon 80D with a lens attached, not more than 11 lbs.

Q: 4. Is the Benro VT2 3-leg base compatible with the MPA40A monopod?

A: The rubber foot on the monopod does not seem to be removable. Therefore, no thread is available for attaching the VT2 with it's 3/8 -16 thread. Also, the way the monopod extends and retracts, with a twisting motion, might make foot attachments awkward or impractical. Cheers

Q: 5. Will this fit 501pl plate?

A: No, as the 501pl is Manfrotto's, and only fits Manfrotto's quick release system. You will need an Arca Swiss type plate.

Q: 6. Is the folded length 12.6 or 18.5 ?

A: This tripod is 12.6 in length once folded.

Q: 7. I have a Benro B1 ballhead. Am considering the B2 ballhead. The tripod is the C2691T. Will the B2 fit this tripod?

A: From the Benro website, Customer Service FAQ's:I own a ballhead made by another manufacturer. Am I able to use it with my Benro Tripod?Benro tripods all have a 3/8-16 stud that will mate with a socket of that same size on Benro heads. This spec is fairly standard throughout the industry, so almost all non-Benro heads will fit. Make sure that whatever head you use, its load capacity is sufficient for the camera/lens being placed on it.So, it appears the answer is yes.

Q: 8. Can the leg lock in a partially extended state or must it be fully extended to lock?

A: Hi yes I am almost positive it can lock partially extended. I have only used it fully extended and in locked position. Hands down a well built Monopod! - Drew

Q: 9. Does the quick release plate locking knob incorporate a safety mechanism, such as pull and twist, similar to what is found on some other Benro ball heads?

A: Actually, there is a safety mechanism: once the pressure has been relieved on the ball by untwisting the knob, the knob must be pulled out and twisted once more to release the plate. Look at the pictures, where this mechanism can be seen.

Q: 10. What L bracket would work with this ball head and my Nikon D5600?

A: There are a number of L brackets that will work, click on the following link to see your choices; https://bhpho.to/30WF5Si