The Vanguard ALTA Pro 2 263AV Tripod with PH-114V Headis a lightweight kit that comfortably supports cameras and accessories weighing up to 13.2 pounds. It folds to less than 27" in length for storage or transport. The system features a minimum height of less than 20", and extends to 54.5". At maximum height, you can extend the central column for an additional 13 inches of height.

The head incorporates a bubble level and pan handle rosettes on the left and right sides (only one handle is included). It features a tilt range of -45 to 90°, and 360° of pan. Three-section aluminum legs with twist locks make for a secure platform, and the non-slip feet enable using the tripod on both hard and soft surfaces.

Optimized for 13.2 Pounds    Magnesium Alloy Head    QS-61 Arca-Type Camera Plate    Friction-Controlled movements    -45 to 90° Tilt    360° Pan    Bubble Level    Dual-Sided Pan Handle Rosettes    3-Section Aluminum Legs    Anti-Slip Rubber Feet

-45 to 90° tilt

Integrated center column

Individual indexed leg locks

Related Questions and Answers

Q: 1. What is the maximum size of a ballhead that can go on this tripod ?

A: This tripod has an industry standard 3/8th thread on top. It will receive any traditional tripod head. We would recommend something that can support around 30lbs.

Q: 2. How long is the swinging arm?

A: It's about 17 inches from that orange ring at the top to the other end

Q: 3. Does it work for my sony a6100 camera??

A: Yes Vanguard Alta Pro 263AP Aluminum-Alloy Tripod Kit with PH-32 3-Way, Pan-and-Tilt Head is compatible with the Sony A6100.

Q: 4. Folded length 30.5"? Does that mean it is a studio tripod and cannot be carried on the backpad??

A: Although the folded length would not allow this tripod to be carried on a backpack easily, it would still be a suitable option for someone working in or out of the studio.

Q: 5. What's the weight of this tripod? Only information on this is 'Package Weight'

A: Weight is 2.0 kg (4.4 lbs) from manufacturer spec

Q: 6. Will this work with the peak design arca camera plate?

A: Yes. Peak Design's plates (which are also arca-swiss style) will work with this tripod's head. :)

Q: 7. Is the tripod compatible with a 4x5 camera?

A: Yes, As long as the 4x5 camera and lens are no heavier than 11 pounds, the Vanguard Alta Pro 2+ 263AP Aluminum-Alloy Tripod Kit with Alta PH-32 3-Way, Pan-and-Tilt Head is compatible.

Q: 8. why Load Capacity 15.4 (39.1 cm) what i think it should be in weight ?

A: The correct capacity rating for this tripod is 15.4 lbs. While we, of course, strive for 100% accuracy in our over 200,000 item catalog, sometimes errors do creep in. We apologize for any confusion and inconvenience.

Q: 9. Someone know how it works the photo-panorama switch in the pan head? a twisted and I really don't see any difference

A: what the position change does, when turned to panorama, causes the head to be always movable (rotatable) (to take panorama shots) regardless of how tight you turn the 2 large knobs.when the position in not in panorama mode, the large knobs can be tightened to effectively 'lock' the head, so it can not be moved at all... This is the only way to actually 'lock' the position of the head from movement on any axis.if you do not notice any difference between the positions, you are likely not tightening one of the large knobs tight enough. note: that there is no panorama friction adjustment in panorama mode, but it is reasonably smooth. If you are looking for a head primarily for video panning shots, you are better off choosing one with longer knobs, as although this is a nice head, it is best suited for general, fixed shots due to the short knobs and their respective positional adjustment range.

Q: 10. Does the Alta PH-114V head come off so you can have just the flat surface for mounting a Rhino ROV Slider?

A: Yes, the Vanguard Alta PH-114V Head is removable from the Pro 2 263AV Aluminum Tripod System, so you can add a slider to the setup.