The HD-488E HD/SD-SDI Time Code Reader/Generator/Inserter with IRIG Input from ESE is designed for high definition or standard definition SDI video. It reads and generates Linear Time Code (LTC) and RP-188 Time Code. The unit accepts a multitude of HD formats. The insert mode provides the ability to superimpose time and/or user bits onto video with alphanumeric characters. As many as thirty characters of text may be superimposed onto the video.

The HD-488E allows you to select the information to be displayed (time, time and user bits, or text) on up to three different windows. The three windows are independent of each other and may be blank. The HD-488E also features color fonts and backgrounds and time code in closed caption. The video input and output are accessible via rear-mounted BNC connectors (IRIG-B input is accessible via a BNC connector).

The HD-488E is housed in a single height rack mount enclosure that is black anodized. A 16 x 2 character LCD shows the current time and status of the HD-488E, while the front panel controls allow you to access all configuration settings as displayed on the 16 x 2 character LCD, including front panel text entry. The same controls are available on the software that is accessible via the rear mounted USB port.

Generates/inserts timecode

Dual LTC output

USB setup interface

User-friendly control

Color fonts

Time zone offset

LCD setup/status display

Universal power supply (90-264 VAC)

Accepts multiple HD formats

• Timecode / time of day / user text window burn
• Transcode SMPTE codes to IRIG-B
• Transcode RP-188 to LTC
• Transcode LTC to RP-188
• Master timecode generator
• IRIG sourced NTP server
• Drive standard ESE remote displays with time of day
• Transcode IRIG A/B/G to IRIG-B or SMPTE codes
• IRIG-B generator

Related Questions and Answers

Q: 1. How does this SDI splitter operate without a power supply? It seems like all the other units like it require one.

A: According to Apantac, this passive splitter has minimal internal wiring, and draws power through the SDI connection.

Q: 2. Is it rechargeable or battery operated?

A: The Gefen GefenToolBox HD Pattern Signal Generator requires power from the wall and is not a portable unit with batteries.

Q: 3. Does anyone know if this reclocks the signal?

A: We're afraid not. This is passive, it will not re-clock the signal. For a re-clocked signal you would need to look at the Apantac 3G-SDI 1x4 Re-Clocking Distribution Amplifier, B&H # APDA4HD, instead. https://bhpho.to/2EkR1Ue

Q: 4. will this unit upgrade the analog signal to 720 or 1080 sdi?

A: cannot change the resolution, 720 to 720 or 1080 to 1080

Q: 5. Will this convert S-Video?

A: Yes, this product can be used with to convert Component, Composite or S-Video.

Q: 6. Does DataVideo DAC-70 support SMPTE Level B?

A: Hi Gill,Our DAC-70 support SMPTE Level A, not Level B.

Q: 7. Anyone know the processing delay? Want to bring a consumer HDMI camera into a 720p system, for IMAG. Thanks in advance for your input.

A: No delay. I have used it for IMAG. SOLID PERFORMANCE.

Q: 8. Why is this converter box not compatible with the Sony HDR-FX7 camera?

A: The specs for input is shown below, and it specifically says that the Sony HDR-FX7 will not work. It does not say why, but the Sony HDR-FX7 is 1440x1080 which may be the answer. 720 x 480 interlaced (NTSC) 720 x 576 interlaced (PAL) 1280 x 720 / 50Hz progressive 1280 x 720 / 59.94Hz progressive 1280 x 720 / 60Hz progressive 1920 x 1080 / 50Hz interlaced 1920 x 1080 / 59.94Hz interlaced 1920 x 1080 / 60Hz interlaced 1920 x 1080pConnections Input: HDMI Output: 2x BNC connectors for HD/SD-SDI Audio: HDMI audio is embedded into the SDI output. Note: The DAC-9P is not compatible with the HDMI output from the Sony HDR-FX7 camera. The DAC-9P is compatible with other Sony cameras. The Sony HVR-V1 and the Sony HVR-HD1000U have been tested and are compatible with the DAC-9P.

Q: 9. Will it convert from 1080p 50 frames to 1080i 50 frames?

A: Yes indeed. Great unit!

Q: 10. how to upgrade its firmwere? actually we are facing white flashes at its quad output.plz help us in this regard.

A: Please contact SWIT directly for technical support: SWIT: Tel: (866) 986-7948 or (408) 260-8258 Email info@swit.us