Connect your HDBaseT-compatible equipment with the blue 125' Kramer CAT6a HDBaseT Cable. It features gold-plated RJ-45 connectors to help resist corrosion and enhance data transfer speeds.

Gold-Plated RJ-45 Connectors    For HDBaseT Installations

• Conductors: 4 x 2 x 23 AWG, annealed copper
• Conductor Outer Diameter: 0.56 ± 0.01mm
• Insulation Material: Skin/foam/skin HDPE
• Insulation Outer Diameter: 1.33 ± 0.1mm
• Color: Per TIA/EIA 568-B
• Screening: Alu/PET per pair (Alu side out)
• Drain Wire: 90% tinned copper
• Drain Wire Outer Diameter: 0.4 ± 0.01mm
• Jacket: LSHF, blue RAL5012

• Maximum Pulling Tension: 100 N
• Bending Radius: Installation 2.36", Installed 1.97"
• Operation Temperature: -4 to 140°F
• Storage/Transport/Installation Temperature: 32 to 122°F

• Impedance at 1 to 100 MHz: 100 ± 15 Ohms
• Impedance at 100 to 250 MHz: 100 ± 20 Ohms
• Impedance at 250 to 500 MHz: 100 ± 50 Ohms
• Propagation Velocity: 76%
• Capacitance Unbalanced Pair/Ground: ≤1500 pF/km
• Pair Resistance Unbalance: DC <1.5%
• Dielectric Strength: 2.5 kVDC (2s)
• Insulation Resistance: >5000 MOhms/km
• Voltage Rating: 30V

• Over four individually screened twisted pairs, this U/FTP CAT6a cable runs Kramer's DGKat technology, 4K HDBaseT technology, or LAN applications
• Designed to ensure optimum signal performance
• 23AWG solid copper conductors are cabled together in an unshielded outer jacket
• Engineered for optimized use with Kramer's DGKat and HDBaseT hardware
• Shielded RJ-45 connectors with 50u gold-plated contacts

Related Questions and Answers

Q: 1. does it support up to 144hz?

A: The Kramer C-MDPM/MDPM Flexible DisplayPort Cable (3') B&H # KRCMDPMMDPM3 is capable of up to 4K@60Hz (4:4:4).

Q: 2. These are only rated for 30V, so cannot be used with 802.3af POE (48V), correct?

A: Correct, this would overload the cable and create too much resistance.

Q: 3. is the extender IP based? is it able to be fed through a switch in its own VLAN? or does it have to be a direct connection on both ends?

A: It is not IP traffic, it is HDbaseT over ethernet cable. https://en.wikipedia.org/wiki/HDBaseT

Q: 4. Will this work for regular networking needs? Modem to switch to computers?

A: This can be used in a network between modems, routers and computers.

Q: 5. Will this work with a webcam?

A: Yes, you can use the Kramer USB 3.0 Active Extender Cable (50') with a USB webcam.

Q: 6. Will this work with a USB b 3.0 device, speedwise, connecting to Mac Studio thunderbolt port, will device run at full speed?

A: This Kramer USB-C to USB-B 3.2 Gen 2 Male Cable (3', White) can be used with USB-B 3.0 devices, but speeds will be limited to USB-B 3.0 speeds.

Q: 7. I wanna make sure this will connect to an Cannon M50 so I can send my RAW files to my PC?

A: Yes.

Q: 8. will this cable work to connect this hub: BH #XCSH75H2HC2 to a Mac Studio?

A: Yes, the Kramer USB-C to USB-B 3.2 Gen 2 Male Cable could be used to connect a USB Type B device such as BH #XCSH75H2HC2 to a Mac Studio or other USB-C computer.

Q: 9. Do they come in black?

A: We don't sell this exact unit in black, but we do sell a great option from Pearstone. B&H # PEUSB3AA15.

Q: 10. How much does this product weigh?

A: The weight of this cable is about 40 pounds