Connect studio strobes and other flashes to your FlashQ Receiver with this LightPix Labs Male PC Sync Cord for Camerasfrom LightPix Labs. Measuring 5.9" long, this cable will connect the micro-USB port of your receiver to a male PC connector on your flash for remote triggering compatibility.

For FlashQ Receiver    Male PC to Micro-USB Sync Cable    Length: 5.9"

Related Questions and Answers

Q: 1. Would this cord connect to a Canon Speedlite 580ii? I've used this cord with strobes before and Wizards with flashes, but for some reason can't remember if it would connect to a flash (don't have my own flash yet so can't go check lol).

A: Yes, this Impact Sync Cord Mini cable would connect a Pocket Wizard to the sync port on the Canon 580EX II.

Q: 2. Will this cord connect a Sekonic 478DR light meter to an Alienbee B800 light or a Canon 580 ExII flash to meter them?

A: This cord on it's own won't be suitable for either application. I think the Alienbee comes with a 1/4 jack so you'll need a 3.5 mm adapter to use this cord - I don't know if PCB supply the strobe with the adapter. There's no 3.5 mm socket on the 580EX (it's mini PC only) so you'll need a hotshot adapter or just get the PC to PC cord. I'm sure there's a reason you want to use a cord but have you thought about using the meter in cordless mode and just trigger the flash(es) with whatever device you are intending to fire them. Also, it's a more expensive solution but since you have the DR version of the 478 meter have you thought about investing in some Pocketwizards? No cords, no adapters, very convenient and very reliable. I use the Plus IIIs but the Plus X twin pack looks like great value and will work with any other Pocketwizard.

Q: 3. Would this cord connect my canon 7d to my 580ex11 with full metering capabilities. I have a waterhousing for my 7d and a separate one for my flash and the off camera shoe cord does not fit inside my cameras body housing as there is not enough room on the top. So basically I need a cord that will connect the two that is small (possibly connects to side of camera body) and still retains all the metering controls ect. Does such a cord exist?

A: Unfortunately, no, there is not a cable that exists for your stated needs. PC cables do not offer any metering capabilities; they are strictly designed to syncronize the flash with your shutter. When using a PC cable (on any brand camera), you have to set the flash output power manually. If you need a cable that will transfer metering information, you would need a hot shoe TTL off-shoe cable for your needs, such as the Canon OC-E3 Off-Shoe Cable or the Vello TTL-Off-Camera Flash Cord for Canon EOS which we have listed on our website. However, you state you already own a TTL cable, but it does not fit in your housing for your needs. As you are using underwater gear, the manfuacturer may manufacture an option for your needs, but as you have not listed the housing that you own, I would recommend contacting our Underwater Department at uw@bhphotovideo.com and give them the brand/model of your housings to inquire if there is an option that would work for your desired needs.

Q: 4. Will this sync cord work with a Calumet Genesis 200?

A: This sync cord can work with any strobe that uses a 3.5mm miniphone sync connection like a Calumet Genesis 200.

Q: 5. Will this work with mamiya m645 - sekor 80mm 2.8 c lens? I want to sync it with a godox sk400ii by a godox xt16.

A: To use a Xt-16 you would want the cable at this link. https://bhpho.to/33z4wg2

Q: 6. Will this work with a Godox FLash and a Sony A7rIII? Seems as though my Godox flash in finicky with the hotshoe. I'd like to use it off camera.

A: I'm not familiar with the flash or camera. However if either has the connection ports to fit that cable, then yes it should work.

Q: 7. Can I attach this wire to an IMPACT mono light strobe and then to a Sekonic 305B or 305S without damage to either?

A: Sorry- I my question is- can this wire be attached to a Sekonic 308S or 308B without causing any damage to either the light meter or the IMPACT strobe flash?

Q: 8. Will this cable connect my old SekonicL508 to my GodoxX2T to test different flashes and different apertures?

A: Yes, the Impact Sync Cord Male Mini (3.5mm) to Male PC (16') will connect your Sekonic L508 to the Godox X2T series of triggers.

Q: 9. Will this cord work with Pocket Wizard X to a flash with a PC socket?

A: I do not know if this cord will work.

Q: 10. Will this work with my Yonngnuo YN560 III flash with a Vello Freewave LR receiver?

A: The Yongnuo YN560 III can slide onto the Vello Freewave LR receiver without the need of a cable.