The POWERANGE PR-PL-6680B Portable Quad Charger for V-Mount Batteriesis a small, yet extremely versatile charger unit. Not only can it charge four batteries simultaneously, it can also output either 12 to 16.8 VDC and 28 VDC at the same time it is charging your batteries. This allows you to charge your batteries while at the same time, powering your camera.

When not connected to an AC power source your batteries can be used to feed the two discrete XLR outputs on the unit. For supplying 12 to 16.8 VDC, this enables you to hot swap batteries while the power remains uninterrupted. However, for the unit to supply 28 VDC when not plugged into AC power, you must have four 14.8 V (nominal) batteries attached to the unit. The charger features support feet that help prevent it from tipping over. It includes an AC power cable, but you must source the XLR cable yourself.

Simultaneous Charge and Output DC    Outputs 28 or 12 to 16.8 VDC    Simultaneously Charge 4 x Batteries    Hot Swappable Power Distribution    Includes AC Power Cable

Supports four V-mount lithium-ion batteries

28 VDC uses the built-in 3-pin XLR DC power output
12 to 16.8 VDC uses the built-in 4-pin XLR DC power output

Simultaneously charge and output power via either XLR connector

The unit can output 12 to 16.8 VDC from even a single attached battery when not connected to an AC power source. However, it requires four attached and charged batteries for the unit to output 28 VDC when not connected to an AC power source. When connected to an AC power source the unit can charge up to four batteries and provide DC output at the same time

100-240 VAC power input

Built-in carry handle

Built-in support/anti-tip feet

Related Questions and Answers

Q: 1. Will this work on the Black Magic Ursa Mini

A: A POWERANGE PR-BP-1900M 190Wh 14.8V Battery (V-Mount), like other V-mount batteries, would be compatible with a Blackmagic Ursa Mini camera, when used with a V-mount power plate for Ursa Mini.

Q: 2. Does this fit in the small or medium portabrace bag?

A: The Anton/Bauer Performance Series Quad Charger Gold Mount can fit in both the PortaBrace Sack Pack (Small, Blue), BH #POSP1, and the PortaBrace Sack Pack (Medium, Blue), BH #POSP2, however the charger would be a tight fit on the medium and would most likely stick out of the top of the small bag.

Q: 3. Can this charge Anton Bauer Digital 90 batteries?

A: While this charger works with most Gold Mount batteries, Anton Bauer batteries tend to require an Anton Bauer Charger. We do not recommend this charger the Digital 90, instead you will want to look at B&H # ANPERFDUAL. https://bhpho.to/2rQszp1

Q: 4. Can this charge the AB Cine 150wh?

A: According to POWERANGE yes, this can charge the Anton Bauer 15Wh battery.

Q: 5. Can this charge all 4 batteries at the same time?

A: Yes this can charge 4 batteries at the same time.

Q: 6. Is this charger compatible with these batteries? Anton Bauer Logic Series Dionic 160 Digital Interactive Lithium-Ion Battery, 14.4 volts, 160 watt hours, Anton Bauer 3-Stud Gold Mount

A: Yes, it will charge all Dionic model, as well as Hytrons (NiMH) and the new AntonBauer offerings (Digital and Cine series).

Q: 7. Will this work with the Endura cue V-mount d-150? 146Wh

A: no this will not charge IDX batteries

Q: 8. Will this fleet charger charge the XP-L90A battery model?

A: Yes this charger should work well with any Gold Mount Core SWX Battery.

Q: 9. i have this batteries, suddenly they wont work with anything (cameras, plates, d-tap), but they do charge, any ideas how to fix this?

A: Yes, Please contact our liv-chat team for support.

Q: 10. Is this charger compatible with IDX Endura Duo DC14.4V lithium Ion V-mount batteries??

A: Yes, the Core SWX Fleet Micro 3A Digital Quad Charger compatible with batteries from RED, Anton Bauer, and others in addition to CoreSWX.