The FoxFury Command+ Tilt Headlamp Helmet Light White LEDsfrom FoxFury Command+ Tilt Headlamp Helmet Light White LEDsis a slim, bright headlamp with white LEDs designed for public safety and industrial professionals, but also suited to recreation and general-purpose use. The lamp delivers 32, 78 or 100 lumens, with runtimes of 5/6/14 hours. It comes equipped with an elastic headband for use directly on the head or over a ballcap, and the included silicone strap holds the lamp securely on a hard hat or fire helmet.

As its name suggests, the lamp tilts so you can place the beam where you need it, and its curved shape provides panoramic coverage with a top output of 100 lumens. The Command+ Tilt White is best suited for close-up tasks like inspection, repair and maintenance, and general area illumination. A bright red rear-facing blinker on the battery pack enhances safety at fire and other emergency scenes.

The Command+ Tilt is designed for challenging environments. Its nylon 66 housing and polycarbonate lens are submersible and impact-resistant to 9.8' and meet NFPA fire-resistance standards.

32/78/100 Lumens    White LEDs    Adjustable Tilt    Rear-Facing Red Blinker    Fits under Fire Helmet Face Shield    Runtime: 5/6/14 Hours    Panoramic Beam Angle    Uses Four AA Batteries    Waterproof    Impact Resistant

• White True to Life light is suited for inspection, repair & maintenance
• Wear on fire helmet, hard hat, over ballcap or directly on head
• 32/78/100 lumen output
• 5/6/14 hour runtime
• Adjustable tilt
• Curved shape for panoramic coverage
• Silicone and elastic straps
• Rear-facing red safety blinker

Related Questions and Answers

Q: 1. Will this fit the Phatom 4 Pro V2?

A: Yes. The FoxFury Rugo R1S Drone LED Light System for DJI Phantom 4 & Phantom 4 Pro is meant for use with the Phantom 4 series.

Q: 2. Country of Origin?

A: The GoGreen Power 3W is made in china.

Q: 3. is a power supply included?

A: A power supply is not included with this product. According to the manufacturer, the reason is that usually these lights are installed over studio doors and are controlled by a relay that is activated when a mic is turned on in a Recording or Broadcast studio.

Q: 4. Will this charge using a standard USB C to USB C quick charge cable like is used to charge modern drones and cell phones?

A: Yes. A standard USB-C and USB-C quick charge cable can be used for the FoxFury D3060 Trade Compliant Drone Light.

Q: 5. How much is the difference in size from L and XL? I don't want me to be out of adjustment when putting the camera and counterweights on. I would like you to tell me about your experience in use and that it remains exactly in the head so that it does not move.

A: The measurements overlap, as the S/M size range is 21.3-23.6" and the L/XL is 22-24.4". I recommend measuring the circumference of your head, by wrapping a string around your forehead and then measure the length of the string.

Q: 6. Does it work with sc?

A: Yes, this is compatible with the Ronin-SC.

Q: 7. Can I get this same item but have it say, "LIVE MIC"?

A: Unfortunately Sandies and other manufacturers do not offer an LED sign that says "LIVE MIC" but Sandies does have the same sign with "RECORDING" which we do have available in stock. You can find it on the website listed as Sandies 393 Three-Sided RECORDING Light with LEDs - 110 VAC to 12 VDC LED Driver (B&H # SAN393REC110).

Q: 8. What protection does it offer? And measurements

A: It's a tactical flashlight so it doesn't protect anything. It's made to be attached to the shield as in the product shot. But it can be clamped on to anything where illumination is needed in an adversarial situation. The measurements are below.LightLength: 5.5 (14.0 cm)Head Diameter: 1.3 (3.2 cm)Body Diameter: 1.1 (2.8 cm)Clamp2.9 x 1.8 x 1.5 (7.4 x 4.6 x 3.8 mm)

Q: 9. Do you think this could handle a 4 pound set up, with camera and lens??

A: We're afraid not. This is rated to handle up to 3 pounds.

Q: 10. Can all iPhone sizes be held vertically with the clamp? Or would additional parts be required?

A: The smartphone clamp is not included with the Glide Gear POV100 Helmet (L / XL). The rig will have a 1/4-20" mount for attaching smartphone clamps.