The FoxFury Command+ Tilt Headlamp Helmet Light White Amber LEDsfrom FoxFury Command+ Tilt Headlamp Helmet Light White Amber LEDsis a slim, bright headlamp with white and amber LEDs designed for public safety and industrial professionals, but also suited to recreation and general-purpose use. The lamp delivers 32, 78 or 100 lumens, with runtimes of 5/6/14 hours. It comes equipped with an elastic headband for use directly on the head or over a ballcap, and the included silicone strap holds the lamp securely on a hard hat or fire helmet.

As its name suggests, the lamp tilts so you can place the beam where you need it, and its curved shape provides panoramic coverage with a top output of 100 lumens. White & amber LEDs are best suited for outdoor use including exploring, search and rescue and forestry / wildland firefighting. A bright red rear-facing blinker on the battery pack enhances safety at fire and other emergency scenes.

The Command+ Tilt is designed for challenging environments. Its nylon 66 housing and polycarbonate lens are submersible and impact-resistant to 9.8' and meet NFPA fire-resistance standards.

32/78/100 Lumens    White/Amber LEDs    Adjustable Tilt    Rear-Facing Red Blinker    Fits under Fire Helmet Face Shield    Runtime: 5/6/14 Hours    Panoramic Beam Angle    Uses Four AA Batteries    Waterproof    Impact Resistant

• White and amber light is suited to exploring, search and rescue, and forestry/wildland firefighting
• Wear on fire helmet, hard hat, over ballcap or directly on head
• 32/78/100 lumen output
• 5/6/14 hour runtime
• Adjustable tilt
• Curved shape for panoramic coverage
• Silicone and elastic straps
• Rear-facing red safety blinker

Related Questions and Answers

Q: 1. How many amps does this product use when plugged in?

A: As per the manufacturer, the unit will draw 0.9 amps for about 100 watts when plugged into an AC outlet.

Q: 2. is a power supply included?

A: A power supply is not included with this product. According to the manufacturer, the reason is that usually these lights are installed over studio doors and are controlled by a relay that is activated when a mic is turned on in a Recording or Broadcast studio.

Q: 3. Do you think this could handle a 4 pound set up, with camera and lens??

A: We're afraid not. This is rated to handle up to 3 pounds.

Q: 4. Will this fit the Phatom 4 Pro V2?

A: Yes. The FoxFury Rugo R1S Drone LED Light System for DJI Phantom 4 & Phantom 4 Pro is meant for use with the Phantom 4 series.

Q: 5. Can all iPhone sizes be held vertically with the clamp? Or would additional parts be required?

A: The smartphone clamp is not included with the Glide Gear POV100 Helmet (L / XL). The rig will have a 1/4-20" mount for attaching smartphone clamps.

Q: 6. Does it work with sc?

A: Yes, this is compatible with the Ronin-SC.

Q: 7. On/off switch? Do you plug into ac?

A: Yes it gets plugged into an AC line. The Power Supply is Not Included.

Q: 8. Can I get this same item but have it say, "LIVE MIC"?

A: Unfortunately Sandies and other manufacturers do not offer an LED sign that says "LIVE MIC" but Sandies does have the same sign with "RECORDING" which we do have available in stock. You can find it on the website listed as Sandies 393 Three-Sided RECORDING Light with LEDs - 110 VAC to 12 VDC LED Driver (B&H # SAN393REC110).

Q: 9. What material is this frame made of?

A: The FoxFury EXOLANDER D3060-TC Light System for DJI Mavic 3 is constructed of a fire-and impact-resistant polycarbonate material.

Q: 10. Do any of your On-air lights have drivers as described?: your lights have STEP 11- CONNECT AN ON AIR LIGHTThe console has a logic output for triggering an external On Air Light.This installation procedure requires a professional technician to select an interface for driving the On Air light that you have chosen. Some lights require low voltages (such as 24VDC) and others require 110VAC. Some have built in drivers, but most do not.

A: We had to do some rewiring. It came with an LED strip and the voltage was too high for the strip. Had to get a regular light bulb. It wasn't too difficult and looks great, but wasn't plug and play.