The silver Audio-Technica AT8449a/SV is a microphone shockmount designed to safely cradle a compatible microphone in a commercial facility, project studio, rehearsal space, or home setup. The suspension system decouples the microphone from the stand, which reduces unwanted noise and shock caused by contact with the mic stand or vibrations through the floor.

The AT8449a was created to hold an AT4033a, AT4040, AT4047MP, AT4050, or AT4050ST microphone. It works with 3/8"-16 and 5/8"-27 threads, making it compatible with most mic stands.

Reduces Noise, Shock, and Vibration    For AT4033a, AT4040, and AT4047MP Mics    For AT4050 and AT4050ST Mics    Works with 3/8"-16 and 5/8"-27 Threads

Reduces noise, shock, and vibration transferred through stands, booms, and mounts

Designed to hold an AT4033a, AT4040, AT4047MP, AT4050, or AT4050ST microphone

Works with 3/8"-16 and 5/8"-27 threads

Related Questions and Answers

Q: 1. Will a 2" diameter mic like the Mojave M-201fet work with this?

A: No, it will not. You can use the Mojave SM-200. https://www.bhphotovideo.com/c/product/629468-REG/Mojave_Audio_SM_200_SM_200_Shock_Mount_for.html

Q: 2. What transmitter is this headset compatible with?

A: The Audio-Technica AT889cW is compatible with current Audio Technica UniPak transmitters which feature a 4 pin locking Hirose connector. This includes the 1800, 2000, and 3000 series as well as the System 9 and 10 series.

Q: 3. Will a Audio-Technica 8022 with a Rode dead cat wind screen over it fit in this mount?

A: Yes, the AT8415 shockmount can be used for an AT8022 microphone with a deadcat windscreen.

Q: 4. Does this mic accept phantom +48 power?

A: This is a condenser microphone, so it does require +48 volt phantom power.

Q: 5. Is there a repair kit to replace only the elastic and rubber bands?

A: The replacement parts you need are available directly from Audio-Technica. You can reach them by email at parts@atus.com or by phone at 330-686-2600.

Q: 6. Would it fit Rode NT4?

A: You may have to thread the mic through the bands by weaving it at both pairs of bands, instead of sticking it straight through. I love this shock mount and have used it for years, on all kinds of mics.

Q: 7. Will an AT987 fit in this mount?

A: Yes, the Audio-Technica AT897 Shotgun Microphone will fit in the Audio-Technica AT8410A Shock Mount.

Q: 8. Hi, will a Sony ECM 674 fit on this mount? Thx.

A: Yes it will fit fine.

Q: 9. I need to set up Shure SM57 mic on the top of upright piano using a small tripod mic stand (Ultimate Support JS-KD55 - Angle-Adjustable Kick Drum/Guitar Amp Mic Stand) to record piano playing. Would SM57 fit to this sockmount? And, would this shockmount fit to the stand mentioned above? Further more, would this set be ok for recording upright piano? I am just net very experienced with this, and my piano is not positioned for the usual boom stand. kind regards, Jon

A: The 57s diameter is probably too large for that mount.

Q: 10. is this made of plastic or metal?

A: Metal, well made.