You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Gyrovu Clamp Mount With 360° Swivel & Quick Release

Gyrovu Clamp Mount With 360° Swivel & Quick Release
  • Product Code: eq47731
  • Availability: In Stock

$149.85 $224.78

The GyroVu Clamp Mount with 360° Swivel & Quick Releasefrom GyroVu Clamp Mount with 360° Swivel & Quick Releaseenables you to mount a 1/4"-20 threaded camera accessory, small light, or other component onto a rod or surface. The mount consists of a crab-style clamp, a mini articulating arm, and a quick release mount.

The clamp can secure around any surface, rod, or pipe measuring from 0.5 to 1.5" in diameter. The arm features 180° mini ball heads at each end with 1/4"-20 screws, enabling you to position your accessory at almost any angle. The quick release allows you to quickly mount and unmount your accessory, without the need to unscrew the entire assembly. The clamp tightens easily using its large wingnut and the arm is fastened via a thumb-lever.

Mounts on Surface 0.5 to 1.5" Wide    Adjustable 180° Mini Ball Head Arm    Quick Release Plate & Receiver    1/4"-20 Mounting Screws    Maximum Load Capacity up to 4 lb    Rubber Padding Inside Clamp Jaws    Thumb-Lever Arm Fastener

Parameters
Material of ConstructionAluminum
Payload Capacity<4 lb / 1.8 kg
Mounting Screw2 x 1/4"-20
Maximum Opening0.5 to 1.5" / 12.7 to 38.1 mm
Packaging Info
Package Weight0.705 lb
Box Dimensions (LxWxH)5.8 x 4.4 x 2.3"

Related Questions and Answers

Q: 1. Will this hold an Odyssey 7Q and Sony LP battery?

A: I use this mount on my Ronin-M with a Atomos Ninja Asassin that has the large Sony camcorder batts powering it and the mount has zero issues. Hope that helps.

Q: 2. Are these good for a camera light? And... how do they compare to the more expensive 16x9?

A: This product can certainly be used for on camera lights as long as there is a 1/4"-20 thread present on the light. If you do not need the ability to mount 3/8"-16 products which the 16x9 offers, then GyroVu can do the job just fine.

Q: 3. Will this mount fit a MOZA Lite 2 with a FreeWorld Monitor attached?

A: Just make sure that the ROD size is equal to the bracket size diameter. I needed to adapt the one I bought because I didn't pay attention to the specs for the max ROD size. Once it's installed it's pretty steady and does what it's supposed to. Good Luck .. SLR

Q: 4. What is the exact spacing between the three holes?

A: Spacing between the holes is 7/8".

Q: 5. It says it swivels but can it be locked into one position?

A: The clamp does not have a locking option. I would suggest that you look at our swivel clamp/n which come with a locking pin.

Q: 6. Can someone suggest where to find a replacement for the large lever that tightens at the pivot point? I'm looking for a heavy duty one, preferably metal.

A: We do not have alternate levers for this mount. If the stock lever is having problems, or you have questions about it, please send an email to us at support@dracobroadcast.com. Also if there are any other technical or product related questions.

Q: 7. What kind of mount would I need to attach this to the GoPro Hero 8?

A: The TELESIN Dual GoPro-Style 3-Prong Buckle Mount (Black) is a suitable adapter for the Revo 360° Clip with Quick Mount for GoPro. See the link below. https://bhpho.to/3jot4jY

Q: 8. I have read around and have heard reviews stating that this unit does not contain screws long enough to attach to a Ronin-MX bar. Will this product mount without needing to purchase an additional pack of long screws?

A: GyroVu does not list this mount as compatible with the MX. Any adaptation is on your own and out of warranty. GyroVu does list this different but similar purpose mount for the MX. It is less expensive. GyroVu 7 Heavy-Duty Articulated Arm Mount for DJI Ronin-M/MX & FREEFLY MoVI (Quick Release) B&H # GYGVPMMA7HQ.

Q: 9. What size is the bold on this? Is it a 1/4 20?

A: The Global Truss Mini 360 Light Duty Quick Release Clamp for 2" Pipes (Black) has a M10 bolt that is 30mm long (1.5 pitch thread) It is not 1/4 20.

Q: 10. Is mounting it to the Ronin M relatively quick and easy, tool-less? How does it lock in place after sliding on?

A: Mounting will be quick and easy. It does have screws on it though, that way you can adjust the Monitor Mount and hold it securely in place after it is installed.

29/09/2024

[Aluminum] Use this for lights, arms and stands. They have a solid mounting surface and are light.

5
26/09/2024

[0.705 lb] I bought this and a few extra quick releases for my Ronin M and they have been great. It makes switching monitors between rigs very quick and easy.

5
22/09/2024

[2 x 1/4"-20] Even though most of this is plastic, it is well built and feels like it will hold up under careful use. I'm glad they included a steel (chrome plated brass?) stud instead of a cheap, cast, pot metal stud.

5
13/09/2024

[0.705 lb] This monitor mount feels very sturdy and the quick release is very easy to use. The screws that were preinstalled were a little on the short side but the package included a second set of screws that were slightly longer and worked perfectly.

5
24/08/2024

[0.705 lb] solid!

5
17/08/2024

[<4 lb / 1.8 kg] This is it!! After trying three other ways to hold a monitor straight and secure on the Ronin M, this is the answer!!! The quick release allows it to be secure in a perfectly parallel position. It's strong, secure, and reliable!!!

5
14/07/2024

[2 x 1/4"-20] Strong durable built

5
13/07/2024

[<4 lb / 1.8 kg] So I’ve had numerous ball-head mounts over the years. Some better and some worse. All of them had issues with actually holding a light in place. Ball head slipping at the worst times. This seems to be holding up very well so far. I haven’t used it with any heavy batteries like the Npf 960 yet- so I’m not sure about that. But so far, so good!

5
25/06/2024

[<4 lb / 1.8 kg] Allows movement in any direction

5
24/06/2024

[2 x 1/4"-20] This mount was very easy to install onto my Ronin M. The mount feels very strong and the quick release plate makes it very convenient to swap accessories.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Gyrovu Quick Release Plate For Monitors

$77.85 $109.77

Pedco Ultraclamp 360 Swivel Mount

$119.85 $184.57

Desmond Dba-1 Quick Release Clamp 60mm

$44.85 $59.65

Kirk 1" Quick Release Clamp Qd Socket

$180.00 $261.00

Sirui 100mm T2.9 1.6x Anamorphic Lens Rf-mount

$2,997.00 $3,626.37

Products You May Like

Kino Flo Bag-401 Black Lighting Equipment

$918.00 $1,239.30

Proaim Boxer Hd-2x Motorized Pan/tilt Head

$14,835.00 $20,175.60

Cmple 1000' Cat 5e Ethernet Cable - Green

$194.85 $268.89

Destiny 2 Pc Download With Nvidia Gtx 1080

$179.97 $286.15

Newline Q Series 65" Uhd 4k Touch Screen Monitor

$15,417.00 $22,817.16

Espresso Microfiber 15" Case

$147.00 $185.22

Speco N8jln 8-channel 8mp Nvr 10tb Hdd

$1,949.85 $2,515.31