R2416ULCBi provides 24VAC distributed via sixteen (16) isolated PTC protected Class 2 Rated power limited outputs for powering CCTV cameras, heaters and other video accessories.

• Surge suppression
• Sixteen (16) power LEDs
• Illuminated master power disconnect circuit breaker with manual reset
• 3-wire grounded line cord
• Removable terminal blocks with locking screw flange

Related Questions and Answers

Q: 1. To power the WiFi thermostat how do you connect the wires? This adapter has 3 terminals: AC - GND - AC. Which one goes to C and which one to R on the thermostat?

A: Use both of the AC terminals, one goes to C and the other goes to R.

Q: 2. Comes with EURO plug?

A: It is configured for the USA/North America only. A European adapter is not included.

Q: 3. Is the mounting clip metal or plastic?

A: Plastic. it's pretty thick though.

Q: 4. Can you ship this product to india? Chennai zipcode - 600073

A: You may calculate your actual shipping options/order totals by adding the items you want to a shopping cart. It will then list the shipping options, descriptions, ETA's and fees to your location.

Q: 5. How many standard, fixed cameras can this power?

A: This power supply converts standard 120v AC to 24v AC with 96 VA. This will support cameras that can work off 24v AC. The calculation is based on the 96 VA, which gives you a 4 amp budget. For example this would power 4 cameras that require 1 amp each.

Q: 6. When I plug my Hirose cable into one of the ports with the power turned on, the green light goes out. Is the device I'm trying to power (a Lumos 100MK) not compatible?

A: Unfortunately they are not compatible. The Lumos 100MK is a lighting product. The ABPAK External Power is for Pro Audio devices with 4 pin Hirose connectors.

Q: 7. 110v input what's the dc output?

A: no, 24V AC output, not DC. Do not plug this into something that is expecting DC.

Q: 8. I've noticed there are no screw ears for rack mounting on the bottom. How does this work?

A: This unit would ideally be mounted in a standard equipment rack with the wings on either side screwed into the rack's frame. The bottom and top are left clear to mount other units above and below.

Q: 9. It comes with no instructions. I need it for a 4 to 24v load. Does the hot for this load go on the left or the right?

A: AC does not make a difference which is which. You can go either way.

Q: 10. I get 24 VDC by connecting AC screw terminal together and using the ground to the other end of circuit. OK?

A: The MG Electronics 24 VAC 40VA Class II Power Supply with Screw Terminal Output and Auto-Resetting PTC Fuse (BH # MGT2440P) is designed to output 24VAC, 40VA.