The ARRI 2-Pin LEMO to 3-Pin Fischer Cable 19"(19") is designed to power an ARRI Wireless Video System WVT-1 transmitter, WVR-1 receiver, or UMC-4 controller. This cable provides power but does not support a run/stop function.

For ARRI WVT-1, WVR-1, UMC-4    2-Pin LEMO-Type to 3-Pin Fischer    19" Cable Length

Related Questions and Answers

Q: 1. Would this work with a Bolt 4K LT transmitter?

A: We recommend this instead: Teradek 18W AC Adapter to 2-Pin LEMO (6') (B&H # TEBIT056 MFR # 11-0057). This is the AC adapter that Teradek packages with the Bolt 4K LT.

Q: 2. Would work on a Sony Venice 1 Rialto set up? I need to get power from the 24v output to 12v accessories like a monitor


A: We haven’t tested this, but in theory this should work. The Rialto has a Fischer 3-pin 24v output and the Hawk-Woods RP-A3 would convert the 24v to 2x 12v 2 pin LEMOs output to power the monitor. Also, as long as you are not powering off other equipment, we don’t see you running into any issue. If you need to power other accessories then, we would recommend a Battery plate with power distribution like the Tilta Cage for Sony VENICE Rialto Extension (V-Mount) for example. Tilta Cage for Sony VENICE Rialto Extension (V-Mount) BH #TIESRT13RCCV

Q: 3. Would this work to power the Tilta Power Supply Base Plate for DJI Ronin RS 3 Pro?

A: The Teradek 2-Pin LEMO to AC Adapter Cable (6 ft) will not supply sufficient power to the Tilta Power Supply Base Plate for Select DJI Gimbals.

Q: 4. Can this be used with a Panasonic G85?

A: No, the Tilta DMW-BLF19 Dummy Battery to 3-Pin Fischer Power Cable (14") is not compatible with the Panasonic Lumix DMC-G85 Mirrorless Micro Four Thirds Digital Camera (Body Only), BH #PADMCG85. I recommend using a DMW-BLC12 dummy battery like the GyroVu USB to Panasonic DMW-BLC12 Dummy Battery Cable for GH2 (40"), BH #GYGVUSBGH2 instead.

Q: 5. This should be included in every Bond or Cube device, isn't it? Do I need to buy this separatelly to operate BOnd/Cube without battery? AC I mean

A: If you wish to use the Bond or Cube on AC only, yes this is what you need. Because everyone's needs are different, manufacturers offer some accessories as options. Thus people who only use batteries are not stuck with AC power adapters they do not use nor are people who only use AC get batteries that clutter up their closets.

Q: 6. But, Bond II box includes AC adapter to 2pin lemo already, right? This is just another one, if someone needs to have two of them, right? Thank you

A: If you buy a Teradek Bond yes, it comes with an AC power supply and you do not need this if you are using AC power. However, if you are in a situation out of the USA, you will need power plug adapters. You could get this as a back up and plug adapter source. Or just buy any 3rd party plug adapters such as the following.

Q: 7. will this work coming out of an Atomos Shogun Flame?

A: This cable is specific to the Alexa Mini. I don't believe you would be able to use this cable to send audio from any other device.

Q: 8. Will this work with the Bolt 6 750?

A: The Teradek 2-Pin LEMO to AC Adapter Cable (6 ft) would not be compatible with the Teradek Bolt 6 LT 750 3G-SDI/HDMI Transmitter/Receiver Kit. The compatible AC adapter would be the Teradek 18W AC Adapter to 2-Pin LEMO (6'), BH #TEBIT056.

Q: 9. Purchased this for Bolt 1000 Transmitter/Receiver. What I received was a power supply with a 12V/3A output. Is this the right part?? My original is 9.0V/2A. I don't want to fry anything.

A: This is a power cable created by Teradek specifically for their Cube, Bolt, Bond and Link products. It should work just fine with your Bolt 1000.

Q: 10. Are these both male connectors?

A: Yes, they are.