The black Shure ULXD6/C is a digital tabletop transmitter equipped with a cardioid boundary mic and compatible with ULX-D receivers. The cardioid polar pattern focuses audio capture in front of the mic and rejects much of the off-axis ambient noise, great for picking up one speaker or allowing two panelists sitting next to each other at a large table to share a single mic. The unit's low profile is ideal for applications such as video-conferencing where minimum visibility is required. A smart choice for situations where wired mics are impractical, this tabletop transmitter enables quick setup and tear down, and can be put away in a docking station (available separately) for storing and charging when the mic is not in use..

With rugged, yet lightweight plastic housing, the ULXD6/C transmitter delivers pristine 24-bit/48 kHz audio quality and RF performance over its entire 330' range. It offers AES 256-bit encryption for secure transmission and advanced rechargeability options, making it suitable for use in large meetings at conference and convention centers.

For ULX-D Digital Wireless Systems    Built-In Cardioid Boundary Mic    0.25/10/20mW RF Output Power    Configurable Mute Button with Status LED    High-Pass Filter Reduces Noise    Secure AES-256 Encryption    Networked Intelligent Charging    9 Hr with SB900A Rechargeable Battery

• The mute button that can be configured for momentary or push-on/push-off operation, with a bicolor LED indicating the mute status.
• The unit quickly syncs with a wireless receiver via infrared at the touch of a button.
• The high-pass filter reduces low-frequency noise caused by table vibration or air-conditioning systems.
• A power lockout function disables the power switch and prevents accidental changes during events.
• 0.25/10/20mW selectable RF output power allows you to increase either the transmitter's range or the number of mics operating simultaneously.
• Low latency makes the ULXD6 ideal for meetings that require live sound reinforcement.
• The transmitter is compatible with the full line of Shure's antenna-distribution components.

• The unit operates for up to 8 hours and 40 minutes on two AA batteries.
• An optional Shure SB900A lithium-ion rechargeable battery pack offers intelligent power management with over 9 hours of battery life, precision metering in hours and minutes, and zero memory effect.
• A USB port allows for docked battery charging with the SBC450 (4-bay) and SBC850 (8-bay) networked charging stations (available separately).
• The charging stations enable remote power monitoring via Shure's Wireless Workbench software.

Related Questions and Answers

Q: 1. I'm trying to understand what it means to provide phantom power is for the shure 391o microphone?

A: Condenser mics such as the MX391/O require voltage in order to function. Phantom Power is the voltage required and is sent to the mic through the XLR cable from the whatever source you are connected to be it a mixer of preamp.

Q: 2. Is this compatible with DJI Mic 2?

A: Yes, the Senal AWS-HA Handheld Adapter for Wireless Mic Transmitter is compatible with the DJI MIC 2.

Q: 3. What are the cable's connections?

A: The MX396 is supplied without a connector. Typically, an installer will use phoenix block-type connectors or XLR connectors on the cable. It is OK to separate the cable wires out to three separate XLR connectors.

Q: 4. Would one mic cover a 6 to 8 foot wide area with 2 to 6 people sitting at a witness table? Will be mixed with 9 other board member goose neck mics, the distance between the dias and the witness table is typically ten to 15 feet giver or take.

A: The abilities of the Shure MX391 Microflex Cardioid Boundary Microphone will likely be stretched when tasked with picking up voice from 6 to 8 feet, especially if some in this scenario are quiet speakers. For the best results in this specific situation, two MX391 would be ideal.

Q: 5. does the mic hear vibrations on a floor such as dancers or people walking on a stage ?

A: The Shure MX391 will pick up vibration from the surface it is placed on.

Q: 6. What is the dimensions of this pouch?

A: Interior dimensions are 3.84 x 2.38 x 0.66 inches which provides a secure and snug fit around the Shure UR1 bodypack. It may also be compatible with other bodypack models with similar dimensions, and the pouch does stretch a little if needed.

Q: 7. Is this made up of two different length belts that velcro together? And/or is one an arm/thigh belt? Can the pouch fit a Sennheiser G3 transmitter?

A: Found this on Shure's site: QUESTION:What devices fit into the WA580 cloth pouch?ANSWER:UR1 transmitterULXD1 transmitterP9R receiverThere is a hole in the pouch for the antenna to protrude. Approximate dimensions for the pouch (made with a stretchable material): 4 H x 2 W x 0.75 DThere are two belts that come with the WA580 bodypack pouch. One is 20 inches long and one is 30 inches long. They can be velcroed together to form an extra-large single belt.

Q: 8. This Wireless Mic/Line Transmitter (XLR) is compatible with Bose L1 Pro 8?

A: No, the Bose S1 Pro+ Wireless Mic/Line Transmitter (XLR) is not compatible with the Bose L1 PRO8 Portable Line Array Speaker System. The transmitter is specifically for use with the receiver built into the Bose S1 Pro+ Wireless PA System.

Q: 9. does this have a mute switch?

A: It does not. It is intended to be controlled externally.

Q: 10. Does this provide phantom power for handheld condenser mics?

A: No, the Bose S1 Pro+ Wireless Mic/Line Transmitter (XLR) does not provide 48V phantom power for handheld condenser microphones.