Pair your select Canon camera to the ONsite Relay System with this Tether Tools Relay Camera Coupler Canon LP-E17 Batteryfrom Tether Tools. In this case, it takes the place of the LP-E17-type battery pack and provides a connection to the power source for long-term, continuous operation of your camera. This setup can easily be swapped out with another coupler to provide you with compatibility across camera systems.

Connects Camera to ONsite Relay System    Slides into Camera Battery Slot

EOS 77D
Rebel T6i (750D)
Rebel T6s (760D)
Rebel T7i (800D)

Related Questions and Answers

Q: 1. On a Canon M5, you can't operate the camera without closing the battery door. As far as I can see, there is also no cable outlet of any kind. How is this product physically able to work?

A: You should be able to make it work with the M5 without keeping the battery door open. Canon sells a similar coupler to this for the M5 that plugs into the wall. Ours is meant to plug into a USB battery pack.On the bottom of the inside of the door, do you see a silver piece with a round hole? The version I've found has a number 3 on that rubber piece, but yours may be different. That rubber piece should pop out and you would plug the cable into the coupler through that hole.

Q: 2. What is the size of the battery connection? Is it a 2.1 female? thanks!

A: Yes this coupler offers a 2.1mm female DC connection.

Q: 3. Does this work with the Panasonic GX85?

A: The Tether Tools Relay Camera Coupler for Panasonic Lumix Cameras with DMW-BLG10 Battery will work with the Panasonic GX85

Q: 4. These adapter must to be conected to which power suply? thanks

A: The Relay Camera Coupler for Canon Cameras with LP-E10 battery gets its power from the Tether Tools Case Relay Camera Power System B&H # TECRUPS110 https://www.bhphotovideo.com/c/product/1235872-REG/tether_tools_crups110_case_relay_camera_power.html

Q: 5. Could this in theory power up a BMDPCC 4K which uses the same LPE6 battery model?

A: The Case Relay Power System will not power the BMDPCC. The issue is that this camera requires 12v power. And the Case Relay operates between 7-9v and would not be able to sufficiently power this camera.

Q: 6. Will this work to power my Canon R5 to replace the LP-E6NH battery?

A: The Tether Tools ONsite Relay Camera Power System Kit with Coupler for Canon Cameras with LP-E6 Battery can replace the Canon EOS R5 Mirrorless Camera's battery. This will allow you to power the camera with a USB battery pack.

Q: 7. is. this coupler compatible with the GH5mark 2?

A: No, the Tether Tools Relay Camera Coupler for Panasonic Cameras with DMW-BLF19 Battery is not compatible with the Panasonic Lumix GH5 II Mirrorless Camera (BH #PADCGH5M2). Instead you will need a dummy battery like the Kondor Blue DMW-BLK22 Dummy Battery to DC 1.35/3.5mm Coiled Cable (16 to 36"), BH #KODCBLK22.

Q: 8. Will this coupler work for a Canon 5D Mark IV?

A: Yes, this kit is compatible with the 5d4.

Q: 9. Will this work with a Canon EOS R?

A: No, to use the Case Relay Power System with the Canon EOS R, the required battery coupler is the CRCE6 coupler.

Q: 10. Does this work with the Sony a6500?

A: Yes it should. works on the 6300