The 20' XRSM 3-Pin XLR Female to 3.5mm RA Stereo Mini-Plug from Kopul is a studio-quality cable that can be used for converting a mono-microphone or a line-level signal to a 3.5mm stereo signal for devices such as camcorders, DSLR cameras, recorders, and more. It can be utilized with dynamic mics and self-powered XLR condenser microphones.

The XRSM cable is engineered to provide protection against EMI, RFI, and static noise, offering a gold-plated 3.5mm (1/8") right-angle stereo mini-plug connector with molded strain relief, as well as a 3-pin XLR-F connector with a chuck-style strain relief by REAN. The XRSM cable is built with 24-gauge OFC (oxygen-free copper) conductors, spiral shielding, and has PE insulation, which produces a quiet cable with good conductivity ensuring a clean transfer of the audio signals.

For Camcorders, DSLRs & Recorders    Gold-Plated Right-Angle 3.5mm Connector    REAN XLR Connector with Strain Relief    Copper Spiral Shielding    24 AWG    Reduces EMI, RFI, and Static Noise    20' Cable Length

XLR female to stereo male mini-plug cable is ideal for connecting professional-quality microphones to the stereo mini-plug inputs on DSLR cameras, camcorders, or audio recorders

The copper spiral shielding provides more than 90% coverage and offers superb rejection of radio frequency (RF) and electromagnetic (EM) interference

24-gauge oxygen-free copper (OFC) conductors and polyethylene insulation offer excellent conductivity for a good transfer of audio signal

Studio-quality gold-plated 1/8" (3.5mm) right-angle stereo mini-plug connector and a female XLR connector provide clear signal transfer

The REAN XLR connector with chuck-style strain relief and the molded strain relief of the mini-plug connector create a durable cable

Related Questions and Answers

Q: 1. Can I use a SM58 into my DSLR with this?

A: Yes as long as your camera has a 3.5mm mic input.

Q: 2. can this be used with microphones requiring plug in power? Not 48v phantom, but 1-3v?

A: This cable is intended to be used with dynamic mics and self-powered (battery) condenser mics.

Q: 3. Can i use this cable with my sennheiser mke 600 to record on to my sony ICD-PX333 Digital Flash Voice Recorder?

A: This should work with your recorder as published.

Q: 4. HOW LONG IS THIS CABLE? IS THIS IN METER?

A: 0.0381 METERS

Q: 5. Can this be used with a Zoom H1 with XLR out of a speaker?

A: You can use this cable to connect the XLR mix out of a powered speaker to the line in of an H1n. Please note, the level coming out of the speaker could be much hotter than the H1n line in is expecting. You will want to watch your levels on the H1n to avoid peaking.

Q: 6. Does this send the same signal to both left and right inputs on the camera?

A: Yes. The Kopul XRSM-10B will send a signal from a 3-pin XLR to the left and right channels of a camera. Be mindful of the differences between line and mic, as a line signal will overload a mic input and cause distortion.

Q: 7. Will the Kopul XRSM cable work with a Blackmagic ATEM mini Pro Extreme in receiving audio from a Behringer Digital Audio Mixer?

A: Yes, the Kopul XRSM 3-Pin XLR Female to 3.5mm RA Stereo Mini-Plug Cable can be used to send audio from the XLR audio output of a Behringer Digital Audio Mixer to the 3.5mm TRS audio input on the Blackmagic ATEM Mini Extreme Switcher.

Q: 8. I want to use a hand mic with a movo wireless. Should I use a trs or ra cable?

A: "TRS" refers to the specific wiring of a connector, whereas "RA" (right angle) only refers to its orientation and does not affect the signal otherwise. If your MOVO wireless has a 3.5mm TRS microphone input, the Kopul XRSM 3-Pin XLR Female to 3.5mm RA Stereo Mini-Plug Cable (10') would be a good choice for connecting a dynamic microphone.

Q: 9. with this cable can I connect my XLR dynamic mic(Behringer Ultravoice Xm8500) to DSLR camera?

A: Yes, this cable will work for your dynamic mic into the 3.5mm mic input of a dslr camera.

Q: 10. How long is this cable? Is it measured in meter?

A: maybe 2 ft?