This 20' SMPTE OpticalCON DUO Single-Mode Fiber Cable 20ftfrom SMPTE OpticalCON DUO Single-Mode Fiber Cable 20ftis a two-fiber cable suitable for outdoor and indoor use. It features a Neutrik OpticalCON DUO NO2SX connector on each end, COCA factory terminated and interferometrically tested to GR-326-CORE endface standards. The connectors have common LC contacts and a mechanical shutter system that shields against endface contamination. The cable is tested for < -55 dB typical return, and comes with diagnostics documentation.

The connectors are assembled using the Neutrik opticalCON ADVANCED system, which adds lockable, waterproof metal caps and rubber guards, especially critical for outdoor applications. This improves the cable protection and water resistance in long-term use.

Two-Fiber Outdoor/Indoor Cable    OpticalCON DUO NO2SX Connectors    COCA Factory Terminated    GR-326-CORE Endface Standards    Neutrik opticalCON ADVANCED System    Tested for < -55 dB Return Loss    IP65 Waterproof in Mated Condition    Diagnostics Documentation Provided

• Two-fiber cable suitable for outdoor and indoor use
• COCA factory terminated OpticalCON DUO NO2SX connector on each end, tested to GR-326-CORE endface standards
• Tested for < -55 dB typical return loss
• IP65 waterproof in mated condition
• Assembled using the Neutrik opticalCON ADVANCED system
• Machine polished and tested end faces
• Optical shutter mechanism for added protection
• Tactical tight-buffered PUR cable

Related Questions and Answers

Q: 1. Will this work with the URSA Mini?

A: The Ursa Mini cameras have a standard 2.5mm LANC input. We believe that this Trigger Cable should work with the Ursa Mini.

Q: 2. Will this work with multimode fiber?

A: Unfortunately these are only compatible with single mode fiber.

Q: 3. Does the back of the pouch have button straps or loops so it can be attached to a Pelican Molle panel?

A: Tenba Tools-Series Duo 8 Cable Pouch has loops on each corner so you can use multiple methods of attaching this pouch to Pelican EZ Click MOLLE Lid Panel. The back of the pouch has a 8.5 x 8 x 1.5" pocket. You can use the following fasteners. PortaBrace PS-6 6" Piggin String (Set of 3) BH #POPS6 • MFR #PS-6 https://www.bhphotovideo.com/c/product/65641-REG/Porta_Brace_PS_6_PS_6_6_Piggin_String.html

Q: 4. What are the size of connection at the top and at the bottom?

A: The Novoflex QuadroLeg 3-Section Carbon Fiber Leg (Single)'s top thread connection size is 1/4"; the bottom foot thread size is 3/8".

Q: 5. Is there a transport case for this? I see one in the promotional pictures.

A: The Blackmagic Design SmartView 4K G3 15.6" DCI 4K Broadcast Monitor with SMPTE 2110 does not have its own specific transport case, but any case that will accommodate the dimensions of 18.98 x 10.47 x 2.75" / 48.21 x 26.59 x 6.96 cm will suffice in this situation. The case in the image is hypothetical.

Q: 6. This did not come with a key nor a code - what do I do with it?

A: The unit should have come with instructions, printed on the packaging, on how to set your own code.

Q: 7. Comparing this to the satchler flowtech legs, which feels more durable and less prone to slipping?

A: I would say over all the Sachtler Flowtech legs are going to be a bit better at managing slips than the Manfrotto 635 FAST Single Leg Carbon Fiber Tripod Legs, in part due to the ability to add a mid level or a ground spreader.

Q: 8. Has anyone successfully used a Sachtler Ace XL with these legs?

A: Yes it is possible to use a sachtler ACE XL (75mm Bowl) with these legs

Q: 9. Does it smell? Is the material as the same as the original Divider?

A: The A-MoDe Limited Divider Set for Pelican 1615 does not smell.

Q: 10. I'm looking for a divider set that serve as second layer only (that only take half of depth of 1615) do you have such item?

A: Unfortunately, there is not a divider system that is able to serve as a second layer. No divider system is small enough in height.