This 50' SMPTE opticalCON DUO Single-Mode Fiber Cable 50ftfrom SMPTE opticalCON DUO Single-Mode Fiber Cable 50ftis a two-fiber cable suitable for outdoor and indoor use. It features a Neutrik OpticalCON DUO NO2SX connector on each end, COCA factory terminated and interferometrically tested to GR-326-CORE endface standards. The connectors have common LC contacts and a mechanical shutter system that shields against endface contamination. The cable is tested for < -55 dB typical return, and comes with diagnostics documentation.

The connectors are assembled using the Neutrik opticalCON ADVANCED system, which adds lockable, waterproof metal caps and rubber guards, especially critical for outdoor applications. This improves the cable protection and water resistance in long-term use.

Two-Fiber Outdoor/Indoor Cable    OpticalCON DUO NO2SX Connectors    COCA Factory Terminated    GR-326-CORE Endface Standards    Neutrik opticalCON ADVANCED System    Tested for < -55 dB Return Loss    IP65 Waterproof in Mated Condition    Diagnostics Documentation Provided

• Two-fiber cable suitable for outdoor and indoor use
• COCA factory terminated OpticalCON DUO NO2SX connector on each end, tested to GR-326-CORE endface standards
• Tested for < -55 dB typical return loss
• IP65 waterproof in mated condition
• Assembled using the Neutrik opticalCON ADVANCED system
• Machine polished and tested end faces
• Optical shutter mechanism for added protection
• Tactical tight-buffered PUR cable

Related Questions and Answers

Q: 1. This did not come with a key nor a code - what do I do with it?

A: The unit should have come with instructions, printed on the packaging, on how to set your own code.

Q: 2. So how do I reset it

A: You will need to consult the manufacturer for the steps to reset a lost code.

Q: 3. Does this fit the 1615 Air?

A: Yes, A-MoDe Limited Divider Set for Pelican 1615 fits in the Pelican 1615AirNF Wheeled Hard Case. The case interior dimensions are 29.6 x 15.5 x 9.4" while the A-MoDe Limited Divider Set for Pelican 1615 external dimensions are 29.52 x 15.35 x 7.28".

Q: 4. Does it smell? Is the material as the same as the original Divider?

A: The A-MoDe Limited Divider Set for Pelican 1615 does not smell.

Q: 5. Is there a transport case for this? I see one in the promotional pictures.

A: The Blackmagic Design SmartView 4K G3 15.6" DCI 4K Broadcast Monitor with SMPTE 2110 does not have its own specific transport case, but any case that will accommodate the dimensions of 18.98 x 10.47 x 2.75" / 48.21 x 26.59 x 6.96 cm will suffice in this situation. The case in the image is hypothetical.

Q: 6. Does the back of the pouch have button straps or loops so it can be attached to a Pelican Molle panel?

A: Tenba Tools-Series Duo 8 Cable Pouch has loops on each corner so you can use multiple methods of attaching this pouch to Pelican EZ Click MOLLE Lid Panel. The back of the pouch has a 8.5 x 8 x 1.5" pocket. You can use the following fasteners. PortaBrace PS-6 6" Piggin String (Set of 3) BH #POPS6 • MFR #PS-6 https://www.bhphotovideo.com/c/product/65641-REG/Porta_Brace_PS_6_PS_6_6_Piggin_String.html

Q: 7. I use a setup of one hard wired remote along with a splitter cable and extension cable to trigger two cameras at the same time for interviews so they do not require syncing in post and for the volume of interviews that I do this setup is very important to me. I used two 5DmarkIII's before and now use one 5DmarkIII with my new C300markII. Will this or any other known remote trigger both of these cameras with one remote using a splitter cable? I tried with two intervalometers I currently have and they do not trigger the C300markII even with remote setting correctly set to standard mode unless there's something else I'm missing. Thanks for your help!!!

A: I'm sorry to say we are not aware of a solution like this that will work for both the C300 Mark II and the 5D Mark III. The C300 Mark II and 5D Mark III have different connections for remote controls, which makes this not possible.

Q: 8. Will this fit to IM2720?

A: The A-MoDe Limited Divider Set for Pelican 1610 is designed for the Pelican 1610 Case with Foam Set (B&H # PE1610FB). It will not work with the Pelican iM2720 Storm Trak Case with Foam (B&H # PEIM2720B). Pelican does have a divider kit for the iM2720 case through their site: https://bit.ly/3O1Ojrx

Q: 9. Has anyone successfully used a Sachtler Ace XL with these legs?

A: Yes it is possible to use a sachtler ACE XL (75mm Bowl) with these legs

Q: 10. What do I need to pair this with my Manfrotto 608 Nitrotech Fluid Head. It has a flat base whereas the tripod has a 75mm bowl?

A: You need a half ball adapter such as the Manfrotto 520BALL 75mm Half Ball (B&H # MA520BALL MFR # 520BALL)