This 75' SMPTE opticalCON DUO Single-Mode Fiber Cable 75'from SMPTE opticalCON DUO Single-Mode Fiber Cable 75'is a two-fiber cable suitable for outdoor and indoor use. It features a Neutrik OpticalCON DUO NO2SX connector on each end, COCA factory terminated and interferometrically tested to GR-326-CORE endface standards. The connectors have common LC contacts and a mechanical shutter system that shields against endface contamination. The cable is tested for < -55 dB typical return, and comes with diagnostics documentation.

The connectors are assembled using the Neutrik opticalCON ADVANCED system, which adds lockable, waterproof metal caps and rubber guards, especially critical for outdoor applications. This improves the cable protection and water resistance in long-term use.

Two-Fiber Outdoor/Indoor Cable    OpticalCON DUO NO2SX Connectors    COCA Factory Terminated    GR-326-CORE Endface Standards    Neutrik opticalCON ADVANCED System    Tested for < -55 dB Return Loss    IP65 Waterproof in Mated Condition    Diagnostics Documentation Provided

• Two-fiber cable suitable for outdoor and indoor use
• COCA factory terminated OpticalCON DUO NO2SX connector on each end, tested to GR-326-CORE endface standards
• Tested for < -55 dB typical return loss
• IP65 waterproof in mated condition
• Assembled using the Neutrik opticalCON ADVANCED system
• Machine polished and tested end faces
• Optical shutter mechanism for added protection
• Tactical tight-buffered PUR cable

Related Questions and Answers

Q: 1. Does it come with a handle?

A: yes, it does

Q: 2. Will the Miller Compass 12 fluid head work with this tripod?

A: It depends on the tie down. You need the one with the smaller diameter, otherwise it won´t work

Q: 3. If not using full height, would it extend the thicker sections first before the thinner ones?

A: Yes, that will be possible if not using it at full height.

Q: 4. Is this suitable for canon c100 mark ii with shotgun mic, cinevate duzi v4, and canon EF 70-200mm f/2.8L IS II USM Lens, and yes for long term ?

A: This Tripod has a load capacity between 4.4 to 11 Pounds. The combination of items you listed will be pushing that load capacity. I recommend the Miller SOLO DV 20 instead, B&H # MIDS20SDV2, which has a load capacity up to 22 pounds. It will better be able to handle the items you listed and it is a great long term investment.https://bhpho.to/2AnvSJo

Q: 5. Would this tripod work well with a mediumly rigged FS7 + Sony 18-110mm zoom lens?

A: This tripod has a 22 pound load capacity. It will depend on what is in your full rig, but it is certainly possible to use this with an FS7 depending on all of the other accessories you have. You will just need to keep the load at or below 22 pounds.

Q: 6. Will this tripod work with the Sachtler Ace fluid head, that I think is 75mm also?

A: Yes, and they're currently selling it as a bundle for 11% off.

Q: 7. It can support up to 44lbs, but are their any 75mm heads that support more than 20lbs?

A: The Miller 1036 is a 75mm Head with a 26.46 pound load capacity, B&H # MI1036. We also have the Libec RH45D which has a 26.5 lb capacity, B&H # LIRH45D.https://bhpho.to/2yO7Ffjhttps://bhpho.to/2hqIeZt

Q: 8. Will this support an FS7 package with Atomos Shogun and 70-200 lens in low mode (widest leg angle)? I ask, because I effortlessly snapped the leg of my Benro doing that.

A: The Miller Solo-Q 75 2-Stage Carbon Fiber Tripod is very strong and will hold payload weights up to 44lbs which would be far lower than the FS7 kit you work with. It would be a perfect strong tripod option for your payload.

Q: 9. Has anyone checked the tripod/bag under the plane before? Is it a padded bag?

A: The case is padded, but I wouldn't trust checking it in by itself. If you remove the head from the sticks, they will fit comfortably in a large duffle bag. Then you'll still have room for extra gear :)

Q: 10. Can you tell me the weight please?

A: 2.5kg (5.5lbs)